linux/drivers/base/power, branch v3.2.41

PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()

2012-09-12T02:37:08Z

commit 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b upstream. The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Signed-off-by: Ben Hutchings

PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set

2012-09-12T02:37:08Z

commit 7f321c26c04807834fef4c524d2b21573423fc74 upstream. For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Signed-off-by: Ben Hutchings

PM / Sleep: Prevent waiting forever on asynchronous suspend after abort

2012-07-04T04:44:27Z

commit 1f758b23177d588a71b96ad02990e715949bb82f upstream. __device_suspend() must always send a completion. Otherwise, parent devices will wait forever. Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and system sleep (v2)", introduced a regression by short-circuiting the complete_all() for certain error cases. This patch fixes the bug by always signalling a completion. Addresses http://crosbug.com/31972 Tested by injecting an abort. Signed-off-by: Mandeep Singh Baines Signed-off-by: Rafael J. Wysocki Signed-off-by: Ben Hutchings

PM / Domains: Fix handling of wakeup devices during system resume

2012-04-02T16:52:37Z

commit cc85b20780562d404e18a47b9b55b4a5102ae53e upstream. During system suspend pm_genpd_suspend_noirq() checks if the given device is in a wakeup path (i.e. it appears to be needed for one or more wakeup devices to work or is a wakeup device itself) and if it needs to be "active" for wakeup to work. If that is the case, the function returns 0 without incrementing the device domain's counter of suspended devices and without executing genpd_stop_dev() for the device. In consequence, the device is not stopped (e.g. its clock isn't disabled) and power is always supplied to its domain in the resulting system sleep state. However, pm_genpd_resume_noirq() doesn't repeat that check and it runs genpd_start_dev() and decrements the domain's counter of suspended devices even for the wakeup device that weren't stopped by pm_genpd_suspend_noirq(). As a result, the start callback may be run unnecessarily for them and their domains' counters of suspended devices may become negative. Both outcomes aren't desirable, so fix pm_genpd_resume_noirq() to look for wakeup devices that might not be stopped by during system suspend. Signed-off-by: Rafael J. Wysocki Tested-by: Simon Horman Signed-off-by: Greg Kroah-Hartman

PM Sleep: Do not extend wakeup paths to devices with ignore_children set

2011-11-17T20:39:33Z

Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request()

2011-11-09T23:44:18Z

Make dev_pm_qos_add_request() use WARN() in a better way and do not hardcode the function's name into the message (use __func__ instead). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Rafael J. Wysocki

PM / Clocks: Only disable enabled clocks in pm_clk_suspend()

2011-11-09T23:44:10Z

Refrain from running clk_disable() on clocks that have not been enabled. A typical case when this can happen is during Suspend-to-RAM for devices that have no driver associated with them. In such case the clock may be in default ACQUIRED state. Without this patch the sh7372 Mackerel board crashes in __clk_disable() during Suspend-to-RAM with: "Trying to disable clock 0xdeadbeef with 0 usecount" This happens for the CEU device which is added during boot. The test case has no CEU driver included in the kernel configuration. Needed for v3.2-rc1. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki

PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR())

2011-11-08T21:34:00Z

Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: Thomas Meyer Signed-off-by: Rafael J. Wysocki

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47Z

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include net: sch_generic remove redundant use of net: inet_timewait_sock doesnt need ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h

PM / Runtime: Automatically retry failed autosuspends

2011-11-04T21:28:14Z

Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. Therefore this patch (as1492) adds a mechanism for retrying failed autosuspends. If the callback routine updates the last_busy field so that the next autosuspend expiration time is in the future, the autosuspend will automatically be rescheduled. Signed-off-by: Alan Stern Tested-by: Henrik Rydberg Cc: Signed-off-by: Rafael J. Wysocki