linux/drivers/base/power, branch v3.12.10

Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2013-09-03T22:59:39Z

Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...

Merge branch 'pm-opp'

2013-08-26T23:41:56Z

* pm-opp: PM / OPP: Export opp_add()

PM / OPP: Export opp_add()

2013-08-06T14:08:28Z

Export opp_add() so that modules can use it. Signed-off-by: Viresh Kumar Acked-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki

PM / Sleep: new trace event to print device suspend and resume times

2013-07-27T01:18:35Z

A new trace event is added to PM events to print the time it takes to suspend and resume a device. It generates trace messages that include device, driver, parent information in addition to the type of PM ops invoked as well as the PM event and error status from the PM ops. Example trace below: bash-2239 [000] .... 290.883035: device_pm_report_time: backlight acpi_video0 parent=0000:00:02.0 state=freeze ops=class nsecs=332 err=0 bash-2239 [000] .... 290.883041: device_pm_report_time: rfkill rf kill3 parent=phy0 state=freeze ops=legacy class nsecs=216 err=0 bash-2239 [001] .... 290.973892: device_pm_report_time: ieee80211 phy0 parent=0000:01:00.0 state=freeze ops=legacy class nsecs=90846477 err=0 bash-2239 [001] .... 293.660129: device_pm_report_time: ieee80211 phy0 parent=0000:01:00.0 state=restore ops=legacy class nsecs=101295162 err=0 bash-2239 [001] .... 293.660147: device_pm_report_time: rfkill rfkill3 parent=phy0 state=restore ops=legacy class nsecs=1804 err=0 bash-2239 [001] .... 293.660157: device_pm_report_time: backlight acpi_video0 parent=0000:00:02.0 state=restore ops=class nsecs=757 err=0 Signed-off-by: Shuah Khan Signed-off-by: Rafael J. Wysocki

driver core: replace strict_strto() with kstrto()

2013-07-27T01:02:43Z

The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman

Merge branch 'pm-assorted'

2013-06-28T11:01:40Z

* pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel

PM / QoS: Add dev_pm_qos_request tracepoints

2013-06-24T11:09:03Z

Adds tracepoints to dev_pm_qos_add_request, dev_pm_qos_update_request, and dev_pm_qos_remove_request. It's useful for checking device name, dev_pm_qos_request_type, and value. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki

PM / Sleep: Print last wakeup source on failed wakeup_count write

2013-06-20T22:35:12Z

Commit a938da06 introduced a useful little log message to tell users/debuggers which wakeup source aborted a suspend. However, this message is only printed if the abort happens during the in-kernel suspend path (after writing /sys/power/state). The full specification of the /sys/power/wakeup_count facility allows user-space power managers to double-check if wakeups have already happened before it actually tries to suspend (e.g. while it was running user-space pre-suspend hooks), by writing the last known wakeup_count value to /sys/power/wakeup_count. This patch changes the sysfs handler for that node to also print said log message if that write fails, so that we can figure out the offending wakeup source for both kinds of suspend aborts. Signed-off-by: Julius Werner Signed-off-by: Rafael J. Wysocki

PM / wakeup: Adjust messaging for wake events during suspend

2013-06-11T21:53:37Z

This adds in a new message to the wakeup code which adds an indication to the log that suspend was cancelled due to a wake event occouring during the suspend sequence. It also adjusts the message printed in suspend.c to reflect the potential that a suspend was aborted, as opposed to a device failing to suspend. Without these message adjustments one can end up with a kernel log that says that a device failed to suspend with no actual device suspend failures, which can be confusing to the log examiner. Signed-off-by: Bernie Thompson Signed-off-by: Rafael J. Wysocki

cpufreq: rename index as driver_data in cpufreq_frequency_table

2013-06-04T12:25:59Z

The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar Acked-by: Simon Horman Signed-off-by: Rafael J. Wysocki