linux/drivers/ata, branch v3.4.80

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8

2014-01-08T17:42:11Z

commit 87809942d3fa60bafb7a58d0bdb1c79e90a6821d upstream. We've received multiple reports in Fedora via (BZ 907193) that the Seagate Momentus SpinPoint M8 errors out when enabling AA: [ 2.555905] ata2.00: failed to enable AA (error_mask=0x1) [ 2.568482] ata2.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. Reported-by: Nicholas Signed-off-by: Michele Baldessari Tested-by: Nicholas Acked-by: Alan Cox Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs

2013-12-12T06:34:11Z

commit 29e674dd5c8e781589f09c3ee139c80f6da274e4 upstream. This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik Cc: Ong Boon Leong Signed-off-by: Greg Kroah-Hartman

ahci: Add Device IDs for Intel Lynx Point-LP PCH

2013-12-12T06:34:11Z

commit 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik Cc: Ong Boon Leong Signed-off-by: Greg Kroah-Hartman

ahci: add Marvell 9230 to the AHCI PCI device list

2013-12-04T18:50:22Z

commit 6d5278a68a75891db1df5ae1ecf83d288fc58c65 upstream. Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by: Samir Benmendil Signed-off-by: Tejun Heo Reviewed-by: Levente Kurusa Signed-off-by: Greg Kroah-Hartman

ahci: disabled FBS prior to issuing software reset

2013-12-04T18:50:15Z

commit 89dafa20f3daab5b3e0c13d0068a28e8e64e2102 upstream. Tested with Marvell 88se9125, attached with one port mulitplier(5 ports) and one disk, we will get following boot log messages if using current code: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f ahci 0000:03:00.0: FBS is enabled ata8.00: hard resetting link ata8.00: SATA link down (SStatus 0 SControl 330) ata8.01: hard resetting link ata8.01: SATA link down (SStatus 0 SControl 330) ata8.02: hard resetting link ata8.02: SATA link down (SStatus 0 SControl 330) ata8.03: hard resetting link ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133) ata8.04: hard resetting link ata8.04: failed to resume link (SControl 133) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 1 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.03: native sectors (2) is smaller than sectors (976773168) ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133 ata8.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.03: configured for UDMA/133 ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: limiting SATA link speed to 3.0 Gbps ata8.15: hard resetting link ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: failed to recover PMP after 5 tries, giving up ata8.15: Port Multiplier detaching ata8.03: disabled ata8.00: disabled ata8: EH complete The reason is that current detection code doesn't follow AHCI spec: First,the port multiplier detection process look like this: ahci_hardreset(link, class, deadline) if (class == ATA_DEV_PMP) { sata_pmp_attach(dev) /* will enable FBS */ sata_pmp_init_links(ap, nr_ports); ata_for_each_link(link, ap, EDGE) { sata_std_hardreset(link, class, deadline); if (link_is_online) /* do soft reset */ ahci_softreset(link, class, deadline); } } But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to '0'. The patch test ok with kernel 3.11.1. tj: Patch white space contaminated, applied manually with trivial updates. Signed-off-by: Xiangliang Yu Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive

2013-12-04T18:50:14Z

commit 0523f037f65dba10191b0fa9c51266f90ba64630 upstream. The "Slimtype DVD A DS8A9SH" drive locks up with following backtrace when the max sector is smaller than 65535 bytes, fix it by adding a quirk to set the max sector to 65535 bytes. INFO: task flush-11:0:663 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-11:0 D 00000000ffff5ceb 0 663 2 0x00000000 ffff88026d3b1710 0000000000000046 0000000000000001 0000000000000000 ffff88026f2530c0 ffff88026d365860 ffff88026d3b16e0 ffffffff812ffd52 ffff88026d4fd3d0 0000000100000001 ffff88026d3b16f0 ffff88026d3b1fd8 Call Trace: [] ? cfq_may_queue+0x52/0xf0 [] schedule+0x18/0x30 [] io_schedule+0x42/0x60 [] get_request_wait+0xeb/0x1f0 [] ? autoremove_wake_function+0x0/0x40 [] ? elv_merge+0x42/0x210 [] __make_request+0x8e/0x4e0 [] generic_make_request+0x21e/0x5e0 [] submit_bio+0x5d/0xd0 [] submit_bh+0xf2/0x130 [] __block_write_full_page+0x1dc/0x3a0 [] ? end_buffer_async_write+0x0/0x120 [] ? blkdev_get_block+0x0/0x70 [] ? blkdev_get_block+0x0/0x70 [] ? end_buffer_async_write+0x0/0x120 [] block_write_full_page_endio+0xde/0x100 [] block_write_full_page+0x10/0x20 [] blkdev_writepage+0x13/0x20 [] __writepage+0x15/0x40 [] write_cache_pages+0x1cf/0x3e0 [] ? __writepage+0x0/0x40 [] generic_writepages+0x22/0x30 [] do_writepages+0x1f/0x40 [] writeback_single_inode+0xe7/0x3b0 [] writeback_sb_inodes+0x184/0x280 [] writeback_inodes_wb+0x6b/0x1a0 [] wb_writeback+0x23b/0x2a0 [] wb_do_writeback+0x17d/0x190 [] bdi_writeback_task+0x4b/0xe0 [] ? bdi_start_fn+0x0/0x100 [] bdi_start_fn+0x81/0x100 [] ? bdi_start_fn+0x0/0x100 [] kthread+0x8e/0xa0 [] ? finish_task_switch+0x54/0xc0 [] kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0xa0 [] ? kernel_thread_helper+0x0/0x10 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" Signed-off-by: Shan Hai Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: Fix display of sata speed

2013-12-04T18:50:14Z

commit 3e85c3ecbc520751324a191d23bb94873ed01b10 upstream. 6.0 Gbps link speed was not decoded properly: speed was reported at 3.0 Gbps only. Tested: On a machine where libata reports 6.0 Gbps in /var/log/messages: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Before: cat /sys/class/ata_link/link1/sata_spd 3.0 Gbps After: cat /sys/class/ata_link/link1/sata_spd 6.0 Gbps Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures

2013-11-13T03:01:48Z

commit f13e220161e738c2710b9904dcb3cf8bb0bcce61 upstream. libata EH decrements scmd->retries when the command failed for reasons unrelated to the command itself so that, for example, commands aborted due to suspend / resume cycle don't get penalized; however, decrementing scmd->retries isn't enough for ATA passthrough commands. Without this fix, ATA passthrough commands are not resend to the drive, and no error is signalled to the caller because: - allowed retry count is 1 - ata_eh_qc_complete fill the sense data, so result is valid - sense data is filled with untouched ATA registers. Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: apply behavioral quirks to sil3826 PMP

2013-08-29T16:50:13Z

commit 8ffff94d20b7eb446e848e0046107d51b17a20a8 upstream. Fixing support for the Silicon Image 3826 port multiplier, by applying to it the same quirks applied to the Silicon Image 3726. Specifically fixes the repeated timeout/reset process which previously afflicted the 3726, as described from line 290. Slightly based on notes from: https://bugzilla.redhat.com/show_bug.cgi?id=890237 Signed-off-by: Terry Suereth Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: make it clear that sata_inic162x is experimental

2013-08-04T08:25:54Z

commit bb9696192826a7d9279caf872e95b41bc26c7eff upstream. sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by: Tejun Heo Reported-by: Martin Braure de Calignon Reported-by: Ben Hutchings Reported-by: risc4all@yahoo.com Signed-off-by: Greg Kroah-Hartman