linux/arch, branch v3.8.11

ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE

2013-05-01T16:46:20Z

commit f5d6a1441a5045824f36ff7c6b6bbae0373472a6 upstream. Currently IOP3XX_PERIPHERAL_VIRT_BASE conflicts with PCI_IO_VIRT_BASE: address size PCI_IO_VIRT_BASE 0xfee00000 0x200000 IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 0x2000 Fix by moving IOP3XX_PERIPHERAL_VIRT_BASE below PCI_IO_VIRT_BASE. The patch fixes the following kernel panic with 3.9-rc1 on iop3xx boards: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.0-rc1-iop32x (aaro@blackmetal) (gcc version 4.7.2 (GCC) ) #20 PREEMPT Tue Mar 5 16:44:36 EET 2013 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at mm/vmalloc.c:1145! [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-iop32x #20) [ 0.000000] PC is at vm_area_add_early+0x4c/0x88 [ 0.000000] LR is at add_static_vm_early+0x14/0x68 [ 0.000000] pc : [] lr : [] psr: 800000d3 [ 0.000000] sp : c03ffee4 ip : dfffdf88 fp : c03ffef4 [ 0.000000] r10: 00000002 r9 : 000000cf r8 : 00000653 [ 0.000000] r7 : c040eca8 r6 : c03e2408 r5 : dfffdf60 r4 : 00200000 [ 0.000000] r3 : dfffdfd8 r2 : feffe000 r1 : ff000000 r0 : dfffdf60 [ 0.000000] Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 0000397f Table: a0004000 DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc03fe1b8) [ 0.000000] Stack: (0xc03ffee4 to 0xc0400000) [ 0.000000] fee0: 00200000 c03fff0c c03ffef8 c03e1c40 c03e7468 00200000 fee00000 [ 0.000000] ff00: c03fff2c c03fff10 c03e23e4 c03e1c38 feffe000 c0408ee4 ff000000 c0408f04 [ 0.000000] ff20: c03fff3c c03fff30 c03e2434 c03e23b4 c03fff84 c03fff40 c03e2c94 c03e2414 [ 0.000000] ff40: c03f8878 c03f6410 ffff0000 000bffff 00001000 00000008 c03fff84 c03f6410 [ 0.000000] ff60: c04227e8 c03fffd4 a0008000 c03f8878 69052e30 c02f96eb c03fffbc c03fff88 [ 0.000000] ff80: c03e044c c03e268c 00000000 0000397f c0385130 00000001 ffffffff c03f8874 [ 0.000000] ffa0: dfffffff a0004000 69052e30 a03f61a0 c03ffff4 c03fffc0 c03dd5cc c03e0184 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c03f8878 0000397d c040601c [ 0.000000] ffe0: c03f8874 c0408674 00000000 c03ffff8 a0008040 c03dd558 00000000 00000000 [ 0.000000] Backtrace: [ 0.000000] [] (vm_area_add_early+0x0/0x88) from [] (add_static_vm_early+0x14/0x68) Tested-by: Mikael Pettersson Signed-off-by: Aaro Koskinen Signed-off-by: Russell King Signed-off-by: Jonghwan Choi Signed-off-by: Greg Kroah-Hartman

ARM: 7699/1: sched_clock: Add more notrace to prevent recursion

2013-05-01T16:46:20Z

commit cea15092f098b7018e89f64a5a14bb71955965d5 upstream. cyc_to_sched_clock() is called by sched_clock() and cyc_to_ns() is called by cyc_to_sched_clock(). I suspect that some compilers inline both of these functions into sched_clock() and so we've been getting away without having a notrace marking. It seems that my compiler isn't inlining cyc_to_sched_clock() though, so I'm hitting a recursion bug when I enable the function graph tracer, causing my system to crash. Marking these functions notrace fixes it. Technically cyc_to_ns() doesn't need the notrace because it's already marked inline, but let's just add it so that if we ever remove inline from that function it doesn't blow up. Signed-off-by: Stephen Boyd Signed-off-by: Russell King Signed-off-by: Jonghwan Choi Signed-off-by: Greg Kroah-Hartman

sparc64: Fix race in TLB batch processing.

2013-05-01T16:46:00Z

[ Commits f36391d2790d04993f48da6a45810033a2cdf847 and f0af97070acbad5d6a361f485828223a4faaa0ee upstream. ] As reported by Dave Kleikamp, when we emit cross calls to do batched TLB flush processing we have a race because we do not synchronize on the sibling cpus completing the cross call. So meanwhile the TLB batch can be reset (tb->tlb_nr set to zero, etc.) and either flushes are missed or flushes will flush the wrong addresses. Fix this by using generic infrastructure to synchonize on the completion of the cross call. This first required getting the flush_tlb_pending() call out from switch_to() which operates with locks held and interrupts disabled. The problem is that smp_call_function_many() cannot be invoked with IRQs disabled and this is explicitly checked for with WARN_ON_ONCE(). We get the batch processing outside of locked IRQ disabled sections by using some ideas from the powerpc port. Namely, we only batch inside of arch_{enter,leave}_lazy_mmu_mode() calls. If we're not in such a region, we flush TLBs synchronously. 1) Get rid of xcall_flush_tlb_pending and per-cpu type implementations. 2) Do TLB batch cross calls instead via: smp_call_function_many() tlb_pending_func() __flush_tlb_pending() 3) Batch only in lazy mmu sequences: a) Add 'active' member to struct tlb_batch b) Define __HAVE_ARCH_ENTER_LAZY_MMU_MODE c) Set 'active' in arch_enter_lazy_mmu_mode() d) Run batch and clear 'active' in arch_leave_lazy_mmu_mode() e) Check 'active' in tlb_batch_add_one() and do a synchronous flush if it's clear. 4) Add infrastructure for synchronous TLB page flushes. a) Implement __flush_tlb_page and per-cpu variants, patch as needed. b) Likewise for xcall_flush_tlb_page. c) Implement smp_flush_tlb_page() to invoke the cross-call. d) Wire up global_flush_tlb_page() to the right routine based upon CONFIG_SMP 5) It turns out that singleton batches are very common, 2 out of every 3 batch flushes have only a single entry in them. The batch flush waiting is very expensive, both because of the poll on sibling cpu completeion, as well as because passing the tlb batch pointer to the sibling cpus invokes a shared memory dereference. Therefore, in flush_tlb_pending(), if there is only one entry in the batch perform a completely asynchronous global_flush_tlb_page() instead. Reported-by: Dave Kleikamp Signed-off-by: David S. Miller Acked-by: Dave Kleikamp Signed-off-by: Greg Kroah-Hartman

Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."

2013-04-25T19:51:25Z

commit 3b5e50edaf500f392f4a372296afc0b99ffa7e70 upstream. This reverts commit c17a6554782ad531f4713b33fd6339ba67ef6391. Manuel Lauss writes: lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c line 157 (phys_addr &= PAGE_MASK) bits 32-35 are cut off. Seems the new PAGE_MASK is explicitly 32bit, or one could make it signed instead of unsigned long. From: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

s390: move dummy io_remap_pfn_range() to asm/pgtable.h

2013-04-25T19:51:24Z

commit 4f2e29031e6c67802e7370292dd050fd62f337ee upstream. Commit b4cbb197c7e7 ("vm: add vm_iomap_memory() helper function") added a helper function wrapper around io_remap_pfn_range(), and every other architecture defined it in . The s390 choice of may make sense, but is not very convenient for this case, and gratuitous differences like that cause unexpected errors like this: mm/memory.c: In function 'vm_iomap_memory': mm/memory.c:2439:2: error: implicit declaration of function 'io_remap_pfn_range' [-Werror=implicit-function-declaration] Glory be the kbuild test robot who noticed this, bisected it, and reported it to the guilty parties (ie me). Signed-off-by: Linus Torvalds Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Greg Kroah-Hartman

perf/x86: Fix offcore_rsp valid mask for SNB/IVB

2013-04-25T19:51:23Z

commit f1923820c447e986a9da0fc6bf60c1dccdf0408e upstream. The valid mask for both offcore_response_0 and offcore_response_1 was wrong for SNB/SNB-EP, IVB/IVB-EP. It was possible to write to reserved bit and cause a GP fault crashing the kernel. This patch fixes the problem by correctly marking the reserved bits in the valid mask for all the processors mentioned above. A distinction between desktop and server parts is introduced because bits 24-30 are only available on the server parts. This version of the patch is just a rebase to perf/urgent tree and should apply to older kernels as well. Signed-off-by: Stephane Eranian Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: ak@linux.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

ARM: 7698/1: perf: fix group validation when using enable_on_exec

2013-04-25T19:51:22Z

commit cb2d8b342aa084d1f3ac29966245dec9163677fb upstream. Events may be created with attr->disabled == 1 and attr->enable_on_exec == 1, which confuses the group validation code because events with the PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which may lead to failure at group scheduling time. This patch fixes the validation check for ARM, so that events in the OFF state are still considered when enable_on_exec is true. Reported-by: Sudeep KarkadaNagesha Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Signed-off-by: Will Deacon Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: 7696/1: Fix kexec by setting outer_cache.inv_all for Feroceon

2013-04-25T19:51:17Z

commit cd272d1ea71583170e95dde02c76166c7f9017e6 upstream. On Feroceon the L2 cache becomes non-coherent with the CPU when the L1 caches are disabled. Thus the L2 needs to be invalidated after both L1 caches are disabled. On kexec before the starting the code for relocation the kernel, the L1 caches are disabled in cpu_froc_fin (cpu_v7_proc_fin for Feroceon), but after L2 cache is never invalidated, because inv_all is not set in cache-feroceon-l2.c. So kernel relocation and decompression may has (and usually has) errors. Setting the function enables L2 invalidation and fixes the issue. Signed-off-by: Illia Ragozin Acked-by: Jason Cooper Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: clk-imx35: Bugfix iomux clock

2013-04-25T19:51:11Z

commit cab1e0a36c9dd0b0671fb84197ed294513f5adc1 upstream. This patch enables iomuxc_gate clock. It is necessary to be able to reconfigure iomux pads. Without this clock enabled, the clk_disable_unused function will disable this clock and the iomux pads are not configurable anymore. This happens at every boot. After a reboot (watchdog system reset) the clock is not enabled again, so all iomux pad reconfigurations in boot code are without effect. The iomux pads should be always configurable, so this patch always enables it. Signed-off-by: Markus Pargmann Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo Cc: Lingzhu Xiang Signed-off-by: Greg Kroah-Hartman

ARM: i.MX35: enable MAX clock

2013-04-25T19:51:11Z

commit 5dc2eb7da1e387e31ce54f54af580c6a6f512ca6 upstream. The i.MX35 has two bits per clock gate which are decoded as follows: 0b00 -> clock off 0b01 -> clock is on in run mode, off in wait/doze 0b10 -> clock is on in run/wait mode, off in doze 0b11 -> clock is always on The reset value for the MAX clock is 0b10. The MAX clock is needed by the SoC, yet unused in the Kernel, so the common clock framework will disable it during late init time. It will only disable clocks though which it detects as being turned on. This detection is made depending on the lower bit of the gate. If the reset value has been altered by the bootloader to 0b11 the clock framework will detect the clock as turned on, yet unused, hence it will turn it off and the system locks up. This patch turns the MAX clock on unconditionally making the Kernel independent of the bootloader. Signed-off-by: Sascha Hauer Cc: Lingzhu Xiang Signed-off-by: Greg Kroah-Hartman