linux/arch, branch v3.15.7

ARC: Implement ptrace(PTRACE_GET_THREAD_AREA)

2014-07-28T15:08:29Z

commit a4b6cb735b25aa84a462a1985e3e43bebaf5beb4 upstream. This patch adds implementation of GET_THREAD_AREA ptrace request type. This is required by GDB to debug NPTL applications. Signed-off-by: Anton Kolesov Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx: Add alias for ethernet controller

2014-07-28T15:08:29Z

commit 22970070e027cbbb9b2878f8f7c31d0d7f29e94d upstream. Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

x86/efi: Include a .bss section within the PE/COFF headers

2014-07-28T15:08:28Z

commit c7fb93ec51d462ec3540a729ba446663c26a0505 upstream. The PE/COFF headers currently describe only the initialised-data portions of the image, and result in no space being allocated for the uninitialised-data portions. Consequently, the EFI boot stub will end up overwriting unexpected areas of memory, with unpredictable results. Fix by including a .bss section in the PE/COFF headers (functionally equivalent to the init_size field in the bzImage header). Signed-off-by: Michael Brown Cc: Thomas Bächler Cc: Josh Boyer Signed-off-by: Matt Fleming Signed-off-by: Greg Kroah-Hartman

locking/mutex: Disable optimistic spinning on some architectures

2014-07-28T15:08:28Z

commit 4badad352a6bb202ec68afa7a574c0bb961e5ebc upstream. The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: Peter Zijlstra Reported-by: Mikulas Patocka Cc: David Miller Cc: Chris Metcalf Cc: James Bottomley Cc: Vineet Gupta Cc: Jason Low Cc: Waiman Long Cc: "James E.J. Bottomley" Cc: Paul McKenney Cc: John David Anglin Cc: James Hogan Cc: Linus Torvalds Cc: Davidlohr Bueso Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Russell King Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86, tsc: Fix cpufreq lockup

2014-07-28T15:08:27Z

commit 3896c329df8092661dac80f55a8c3f60136fd61a upstream. Mauro reported that his AMD X2 using the powernow-k8 cpufreq driver locked up when doing cpu hotplug. Because we called set_cyc2ns_scale() from the time_cpufreq_notifier() unconditionally, it gets called multiple times for each freq change, instead of only the once, when the tsc_khz value actually changes. Because it gets called more than once, we run out of cyc2ns data slots and stall, waiting for a free one, but because we're half way offline, there's no consumers to free slots. By placing the call inside the condition that actually changes tsc_khz we avoid superfluous calls and avoid the problem. Reported-by: Mauro Tested-by: Mauro Fixes: 20d1c86a5776 ("sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs") Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Bin Gao Cc: Linus Torvalds Cc: Mika Westerberg Cc: Paul Gortmaker Cc: Stefani Seibold Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

perf/x86/intel: ignore CondChgd bit to avoid false NMI handling

2014-07-28T15:08:26Z

commit b292d7a10487aee6e74b1c18b8d95b92f40d4a4f upstream. Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by: HATAYAMA Daisuke Acked-by: Don Zickus Signed-off-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20140625.103503.409316067.d.hatayama@jp.fujitsu.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86, ioremap: Speed up check for RAM pages

2014-07-17T23:23:20Z

commit c81c8a1eeede61e92a15103748c23d100880cc8a upstream. In __ioremap_caller() (the guts of ioremap), we loop over the range of pfns being remapped and checks each one individually with page_is_ram(). For large ioremaps, this can be very slow. For example, we have a device with a 256 GiB PCI BAR, and ioremapping this BAR can take 20+ seconds -- sometimes long enough to trigger the soft lockup detector! Internally, page_is_ram() calls walk_system_ram_range() on a single page. Instead, we can make a single call to walk_system_ram_range() from __ioremap_caller(), and do our further checks only for any RAM pages that we find. For the common case of MMIO, this saves an enormous amount of work, since the range being ioremapped doesn't intersect system RAM at all. With this change, ioremap on our 256 GiB BAR takes less than 1 second. Signed-off-by: Roland Dreier Link: http://lkml.kernel.org/r/1399054721-1331-1-git-send-email-roland@kernel.org Signed-off-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman

powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64

2014-07-17T23:23:20Z

commit fb43e8477ed9006c4f397f904c691a120503038c upstream. powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by: Guenter Roeck Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman

arm64: implement TASK_SIZE_OF

2014-07-17T23:23:13Z

commit fa2ec3ea10bd377f9d55772b1dab65178425a1a2 upstream. include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Signed-off-by: Colin Cross Acked-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman

crypto: sha512_ssse3 - fix byte count to bit count conversion

2014-07-17T23:23:13Z

commit cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d upstream. Byte-to-bit-count computation is only partly converted to big-endian and is mixing in CPU-endian values. Problem was noticed by sparce with warning: CHECK arch/x86/crypto/sha512_ssse3_glue.c arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types) arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long Signed-off-by: Jussi Kivilinna Acked-by: Tim Chen Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman