linux/arch, branch v3.14.7

MIPS: Fix typo when reporting cache and ftlb errors for ImgTec cores

2014-06-11T18:54:10Z

commit 721a9205396c4ef2a811dd665ec2a232163b583d upstream. Introduced by the following two commits: 75b5b5e0a262790fa11043fe45700499c7e3d818 "MIPS: Add support for FTLBs" 6de20451857ed14a4eecc28d08f6de5925d1cf96 "MIPS: Add printing of ES bit for Imgtec cores when cache error occurs" Signed-off-by: Markos Chandras Reported-by: Matheus Almeida Cc: linux-mips@linux-mips.org Cc: Markos Chandras Patchwork: https://patchwork.linux-mips.org/patch/6980/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

ARM: 8064/1: fix v7-M signal return

2014-06-11T18:54:09Z

commit 483a6c9d447f625b991fa04a1530493d893984db upstream. According to the ARM ARM, the behaviour is UNPREDICTABLE if the PC read from the exception return stack is not half word aligned. See the pseudo code for ExceptionReturn() and PopStack(). The signal handler's address has the bit 0 set, and setup_return() directly writes this to regs->ARM_pc. Current hardware happens to discard this bit, but QEMU's emulation doesn't and this makes processes crash. Mask out bit 0 before the exception return in order to get predictable behaviour. Fixes: 19c4d593f0b4 ("ARM: ARMv7-M: Add support for exception handling") Acked-by: Uwe Kleine-König Signed-off-by: Rabin Vincent Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: 8051/1: put_user: fix possible data corruption in put_user

2014-06-11T18:54:09Z

commit 537094b64b229bf3ad146042f83e74cf6abe59df upstream. According to arm procedure call standart r2 register is call-cloberred. So after the result of x expression was put into r2 any following function call in p may overwrite r2. To fix this, the result of p expression must be saved to the temporary variable before the assigment x expression to __r2. Signed-off-by: Andrey Ryabinin Reviewed-by: Nicolas Pitre Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled

2014-06-11T18:54:09Z

commit 4b353a706a86598ba47307c47301c3c428b79e09 upstream. On OMAP4 panda board, there have been several bug reports about boot hang and lock-ups with CPU_IDLE enabled. The root cause of the issue is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common code for right reasons but on OMAP4 which suffers from a nasty ROM code bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..}, we loose interrupts which leads to issues like lock-up, hangs etc. Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag} and 54769d6 {cpuidle: OMAP4: remove timer broadcast initialization} to avoid the issue. With this change, OMAP4 panda boards, the mentioned issues are getting fixed. We no longer loose interrupts which was the cause of the regression. Fixes: cb7094e8 (cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag) Fixes: ff999b8a (cpuidle: OMAP4: remove timer broadcast initialization) Cc: Roger Quadros Cc: Kevin Hilman Cc: Tony Lindgren Cc: Daniel Lezcano Reported-tested-by: Roger Quadros Reported-tested-by: Kevin Hilman Tested-by: Tony Lindgren Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on all OMAP3 platforms

2014-06-11T18:54:09Z

commit 98d7e1aee6dd534f468993f8c6a1bc730d4cfa81 upstream. Commit 7b2e1277598e4187c9be3e61fd9b0f0423f97986 ("ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5") enabled clock rate back-propagation from cam_mclk do dpll4_m5 on OMAP3630 only. Perform back-propagation on other OMAP3 platforms as well. Reported-by: Jean-Philippe François Signed-off-by: Laurent Pinchart Signed-off-by: Paul Walmsley Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards

2014-06-11T18:54:09Z

commit 5005e0b76781c37d0a16dd6dd17d015098e8ce92 upstream. Commit c66d039197e4 broke NAND for non-DT boot on all OMAP2 and OMAP3 boards using board_nand_init(). Following error is seen at boot [ 0.154998] (null): Unsupported NAND ECC scheme selected For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data must be set to OMAP_ECC_HAM1_CODE_HW to work properly. Tested on omap3-beagle c4. Fixes: c66d039197e4 (mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes) Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: omap5: hwmod_data: Correct IDLEMODE for McPDM

2014-06-11T18:54:09Z

commit 0f9e19ad88eee820f517b85531b555a0fa73e7e4 upstream. McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi Signed-off-by: Paul Walmsley Signed-off-by: Greg Kroah-Hartman

ARM: imx: fix error handling in ipu device registration

2014-06-11T18:54:09Z

commit d1d70e5dc2cfa9047bb935c41ba808ebb8135696 upstream. If we fail to allocate struct platform_device pdev we dereference it after the goto label err. This bug was found using coccinelle. Fixes: afa77ef (ARM: mx3: dynamically allocate "ipu-core" devices) Signed-off-by: Emil Goode Acked-by: Uwe Kleine-König Signed-off-by: Shawn Guo Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman

arm64: use cpu_online_mask when using forced irq_set_affinity

2014-06-07T17:28:29Z

commit 601c942176d8ad8334118bddb747e3720bed24f8 upstream. Commit 01f8fa4f01d8("genirq: Allow forcing cpu affinity of interrupts") enabled the forced irq_set_affinity which previously refused to route an interrupt to an offline cpu. Commit ffde1de64012("irqchip: Gic: Support forced affinity setting") implements this force logic and disables the cpu online check for GIC interrupt controller. When __cpu_disable calls migrate_irqs, it disables the current cpu in cpu_online_mask and uses forced irq_set_affinity to migrate the IRQs away from the cpu but passes affinity mask with the cpu being offlined also included in it. When calling irq_set_affinity with force == true in a cpu hotplug path, the caller must ensure that the cpu being offlined is not present in the affinity mask or it may be selected as the target CPU, leading to the interrupt not being migrated. This patch uses cpu_online_mask when using forced irq_set_affinity so that the IRQs are properly migrated away. Signed-off-by: Sudeep Holla Acked-by: Mark Rutland Cc: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman

powerpc, kexec: Fix "Processor X is stuck" issue during kexec from ST mode

2014-06-07T17:28:28Z

commit 011e4b02f1da156ac7fea28a9da878f3c23af739 upstream. If we try to perform a kexec when the machine is in ST (Single-Threaded) mode (ppc64_cpu --smt=off), the kexec operation doesn't succeed properly, and we get the following messages during boot: [ 0.089866] POWER8 performance monitor hardware support registered [ 0.089985] power8-pmu: PMAO restore workaround active. [ 5.095419] Processor 1 is stuck. [ 10.097933] Processor 2 is stuck. [ 15.100480] Processor 3 is stuck. [ 20.102982] Processor 4 is stuck. [ 25.105489] Processor 5 is stuck. [ 30.108005] Processor 6 is stuck. [ 35.110518] Processor 7 is stuck. [ 40.113369] Processor 9 is stuck. [ 45.115879] Processor 10 is stuck. [ 50.118389] Processor 11 is stuck. [ 55.120904] Processor 12 is stuck. [ 60.123425] Processor 13 is stuck. [ 65.125970] Processor 14 is stuck. [ 70.128495] Processor 15 is stuck. [ 75.131316] Processor 17 is stuck. Note that only the sibling threads are stuck, while the primary threads (0, 8, 16 etc) boot just fine. Looking closer at the previous step of kexec, we observe that kexec tries to wakeup (bring online) the sibling threads of all the cores, before performing kexec: [ 9464.131231] Starting new kernel [ 9464.148507] kexec: Waking offline cpu 1. [ 9464.148552] kexec: Waking offline cpu 2. [ 9464.148600] kexec: Waking offline cpu 3. [ 9464.148636] kexec: Waking offline cpu 4. [ 9464.148671] kexec: Waking offline cpu 5. [ 9464.148708] kexec: Waking offline cpu 6. [ 9464.148743] kexec: Waking offline cpu 7. [ 9464.148779] kexec: Waking offline cpu 9. [ 9464.148815] kexec: Waking offline cpu 10. [ 9464.148851] kexec: Waking offline cpu 11. [ 9464.148887] kexec: Waking offline cpu 12. [ 9464.148922] kexec: Waking offline cpu 13. [ 9464.148958] kexec: Waking offline cpu 14. [ 9464.148994] kexec: Waking offline cpu 15. [ 9464.149030] kexec: Waking offline cpu 17. Instrumenting this piece of code revealed that the cpu_up() operation actually fails with -EBUSY. Thus, only the primary threads of all the cores are online during kexec, and hence this is a sure-shot receipe for disaster, as explained in commit e8e5c2155b (powerpc/kexec: Fix orphaned offline CPUs across kexec), as well as in the comment above wake_offline_cpus(). It turns out that cpu_up() was returning -EBUSY because the variable 'cpu_hotplug_disabled' was set to 1; and this disabling of CPU hotplug was done by migrate_to_reboot_cpu() inside kernel_kexec(). Now, migrate_to_reboot_cpu() was originally written with the assumption that any further code will not need to perform CPU hotplug, since we are anyway in the reboot path. However, kexec is clearly not such a case, since we depend on onlining CPUs, atleast on powerpc. So re-enable cpu-hotplug after returning from migrate_to_reboot_cpu() in the kexec path, to fix this regression in kexec on powerpc. Also, wrap the cpu_up() in powerpc kexec code within a WARN_ON(), so that we can catch such issues more easily in the future. Fixes: c97102ba963 (kexec: migrate to reboot cpu) Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman