linux/arch/tile/kernel, branch v3.0.82

arch/tile: apply commit 74fca9da0 to the compat signal handling as well

2012-05-21T16:40:03Z

commit a134d228298c6aa9007205c6b81cae0cac0acb5d upstream. This passes siginfo and mcontext to tilegx32 signal handlers that don't have SA_SIGINFO set just as we have been doing for tilegx64. Signed-off-by: Chris Metcalf Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2011-05-29T18:29:28Z

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: more /proc and /sys file support

arch/tile: more /proc and /sys file support

2011-05-27T14:39:05Z

This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann Signed-off-by: Chris Metcalf

Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2011-05-25T22:35:32Z

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits) arch/tile: prefer "tilepro" as the name of the 32-bit architecture compat: include aio_abi.h for aio_context_t arch/tile: cleanups for tilegx compat mode arch/tile: allocate PCI IRQs later in boot arch/tile: support signal "exception-trace" hook arch/tile: use better definitions of xchg() and cmpxchg() include/linux/compat.h: coding-style fixes tile: add an RTC driver for the Tilera hypervisor arch/tile: finish enabling support for TILE-Gx 64-bit chip compat: fixes to allow working with tile arch arch/tile: update defconfig file to something more useful tile: do_hardwall_trap: do not play with task->sighand tile: replace mm->cpu_vm_mask with mm_cpumask() tile,mn10300: add device parameter to dma_cache_sync() audit: support the "standard" arch/tile: clarify flush_buffer()/finv_buffer() function names arch/tile: kernel-related cleanups from removing static page size arch/tile: various header improvements for building drivers arch/tile: disable GX prefetcher during cache flush arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD ...

Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2011-05-24T18:53:42Z

* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: Unify input section names percpu: Avoid extra NOP in percpu_cmpxchg16b_double percpu: Cast away printk format warning percpu: Always align percpu output section to PAGE_SIZE Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun

arch/tile: cleanups for tilegx compat mode

2011-05-20T02:56:13Z

These changes make the syscall table line up correctly for tilegx compat mode, and remove the stale sys32_fadvise64() function, which isn't actually used by any syscall table. Signed-off-by: Chris Metcalf

arch/tile: allocate PCI IRQs later in boot

2011-05-20T02:56:05Z

This change became required due to some recent reworking in the platform-independent IRQ code. It is required for 2.6.38 and later. Cc: stable@kernel.org Signed-off-by: Chris Metcalf

arch/tile: support signal "exception-trace" hook

2011-05-20T02:55:59Z

This change adds support for /proc/sys/debug/exception-trace to tile. Like x86 and sparc, by default it is set to "1", generating a one-line printk whenever a user process crashes. By setting it to "2", we get a much more complete userspace diagnostic at crash time, including a user-space backtrace, register dump, and memory dump around the address of the crash. Some vestiges of the Tilera-internal version of this support are removed with this patch (the show_crashinfo variable and the arch_coredump_signal function). We retain a "crashinfo" boot parameter which allows you to set the boot-time value of exception-trace. Signed-off-by: Chris Metcalf

arch/tile: finish enabling support for TILE-Gx 64-bit chip

2011-05-12T19:52:12Z

This support was partially present in the existing code (look for "__tilegx__" ifdefs) but with this change you can build a working kernel using the TILE-Gx toolchain and ARCH=tilegx. Most of these files are new, generally adding a foo_64.c file where previously there was just a foo_32.c file. The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx, using the existing SRCARCH mechanism in the top-level Makefile. Changes to existing files: - and changed to factor the include of in the common header. - and arch/tile/kernel/compat.c changed to remove the "const" markers I had put on compat_sys_execve() when trying to match some recent similar changes to the non-compat execve. It turns out the compat version wasn't "upgraded" to use const. - and were previously included accidentally, with the 32-bit contents. Now they have the proper 64-bit contents. Finally, I had to hack the existing hacky drivers/input/input-compat.h to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64). Signed-off-by: Chris Metcalf Acked-by: Dmitry Torokhov [drivers/input]

compat: fixes to allow working with tile arch

2011-05-12T19:51:36Z

The existing mechanism doesn't really provide enough to create the 64-bit "compat" ABI properly in a generic way, since the compat ABI is a mix of things were you can re-use the 64-bit versions of syscalls and things where you need a compat wrapper. To provide this in the most direct way possible, I added two new macros to go along with the existing __SYSCALL and __SC_3264 macros: __SC_COMP and SC_COMP_3264. These macros take an additional argument, typically a "compat_sys_xxx" function, which is passed to __SYSCALL if you define __SYSCALL_COMPAT when including the header, resulting in a pointer to the compat function being placed in the generated syscall table. The change also adds some missing definitions to so that it actually has declarations for all the compat syscalls, since the "[nr] = ##call" approach requires proper C declarations for all the functions included in the syscall table. Finally, compat.c defines compat_sys_sigpending() and compat_sys_sigprocmask() even if the underlying architecture doesn't request it, which tries to pull in undefined compat_old_sigset_t defines. We need to guard those compat syscall definitions with appropriate __ARCH_WANT_SYS_xxx ifdefs. Acked-by: Arnd Bergmann Signed-off-by: Chris Metcalf