linux/arch/powerpc/boot, branch v3.10.33

Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2013-05-04T20:45:17Z

Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...

Merge remote-tracking branch 'kumar/next' into next

2013-04-30T01:10:09Z

From Kumar Gala: << Add support for T4 and B4 SoC families from Freescale, e6500 altivec support, some various board fixes and other minor cleanups. >>

powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4

2013-04-29T19:47:25Z

The reg property in the pci bridge device node is used to bind this device node to the pci bridge device. Then all the pci devices under this bridge could use the interrupt maps defined in this device node to do the irq translation. So if this property is missed, the pci traditional irq mechanism will not work. Signed-off-by: Kevin Hao Signed-off-by: Kumar Gala

powerpc/dts: Fix the dts for p1025rdb 36bit

2013-04-29T19:39:31Z

Fix the following errors: Error: p1025rdb.dtsi:326.2-3 label or path, 'qe', not found Error: p1021si-post.dtsi:242.2-3 label or path, 'qe', not found FATAL ERROR: Syntax error parsing input tree Signed-off-by: Zhicheng Fan Signed-off-by: Kumar Gala

mmc: mxcmmc: enable DMA support on mpc512x

2013-04-12T19:13:41Z

Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin Acked-by: Sascha Hauer Signed-off-by: Chris Ball

powerpc/85xx: Fix MPC8536DS 36-bit device tree

2013-04-11T13:26:35Z

The localbus node should be in at 0xfffe05000 not 0xffe05000. Also fixed the names of the localbus and pci nodes to reflect the addresses they are actually at. Signed-off-by: Kumar Gala Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala

powerpc/fsl: Add property for 'era' in SEC dts crypto node

2013-04-11T13:26:20Z

The crypto node now contains a new property 'fsl,sec-era'. This is required so that applications can retrieve era info without having to be able to read SEC's register space. Signed-off-by: Vakul Garg Signed-off-by: Kumar Gala

powerpc/fsl: removed qoriq-sec4.1-0.dtsi.

2013-04-11T13:26:04Z

Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore. Signed-off-by: Vakul Garg Signed-off-by: Kumar Gala

powerpc/512x: add ifm ac14xx board

2013-04-10T18:48:44Z

Add dts file for ac14xx board and its board compatible string to the generic mpc512x board match list. Also add phandle to the dma DT node since there is a change (for MPC5121 SDHC DMA support) merged via linux-mmc tree with reference to the dma controller node in the sdhc node. Signed-off-by: Anatolij Gustschin

powerpc/mpc512x: add platform code for MPC5125.

2013-04-10T18:37:43Z

Tested on MPC5125 Tower evaluation board with mpc512x_defconfig compile configuration. In detail, supports for: - PSC / UART - RTC - ETH - DIU - I2C Signed-off-by: Matteo Facchinetti Signed-off-by: Anatolij Gustschin