linux/arch/arm/boot, branch v3.6.8

ARM: dt: tegra: fix length of pad control and mux registers

2012-11-26T20:14:10Z

commit 322337b8fbd8c392246529d5db924820fc0c7381 upstream. The reg property contains not . Fix the length values to be length not last_offset. Signed-off-by: Pritesh Raithatha Signed-off-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman

Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

2012-09-22T19:40:16Z

Pull ARM and clkdev fixes from Russell King: "Two patches for clkdev which resolve the long standing issue that the devm_* versions were dependent on clkdev, which they shouldn't have been. Instead, they're dependent on HAVE_CLK instead, which implies that you're providing clk_get() and clk_put(). A small fix to the ARM decompressor to ensure that the page tables are properly interpreted by the CPU, and reserve syscall 378 for kcmp (the checksyscalls.sh script is unfortunately currently broken so arch maintainers aren't getting notified of new syscalls...) Lastly, a larger fix for an issue between the common clk subsystem and smp_twd which causes warnings to be spat out." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: reserve syscall 378 for kcmp ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers ARM: 7537/1: clk: Fix release in devm_clk_put() ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores ARM: 7534/1: clk: Make the managed clk functions generically available

Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes

2012-09-18T14:43:16Z

From Nicolas Ferre: Modify AT91 device tree files for making the GPIO interrupts work. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix missing #interrupt-cells on gpio-controller

ARM: at91: fix missing #interrupt-cells on gpio-controller

2012-09-17T08:25:01Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Tested-by: Bo Shen Signed-off-by: Nicolas Ferre

ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores

2012-09-15T23:16:16Z

This patch zeroes the SCTLR.TRE bit prior to setting the mapping as cacheable for ARMv7 cores in the decompressor, ensuring that the memory region attributes are obtained from the C and B bits, not from the page tables. Cc: Nicolas Pitre Reviewed-by: Will Deacon Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Cc: Signed-off-by: Russell King

Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

2012-09-13T01:05:22Z

Pull ARM fixes from Russell King: "It's been a while... so there's a little more here than normal. Mostly updates from Will for the breakpoint stuff, and plugging a few holes in the user access functions which crept in when domain support was disabled for ARMv7 CPUs." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path ARM: 7521/1: Fix semihosting Kconfig text ARM: 7513/1: Make sure dtc is built before running it ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM ARM: 7503/1: mm: only flush both pmd entries for classic MMU ARM: 7502/1: contextidr: avoid using bfi instruction during notifier ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type ARM: Fix ioremap() of address zero

Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes

2012-08-28T00:07:37Z

Fixes for AT91 related to: - move to sparse IRQ: some drivers were forgotten - a DTS typo - the delay for removal of old at91_mci driver * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support

ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores

2012-08-25T08:15:56Z

When enabling the MMU for ARMv7 CPUs, the decompressor does not touch the ttbcr register, assuming that it will be zeroed (N == 0, EAE == 0). Given that only EAE is defined as 0 for non-secure copies of the register (and a bootloader such as kexec may leave it set to 1 anyway), we should ensure that we reset the register ourselves before turning on the MMU. This patch zeroes TTBCR.EAE and TTBCR.N prior to enabling the MMU for ARMv7 cores in the decompressor, configuring us exclusively for 32-bit translation tables via TTBR0. Cc: Acked-by: Nicolas Pitre Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Signed-off-by: Russell King

Merge branch 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

2012-08-23T15:02:42Z

* 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path Also updates to Linux 3.6-rc2 Signed-off-by: Arnd Bergmann

ARM: dts: imx51-babbage: fix esdhc cd/wp properties

2012-08-23T13:10:23Z

The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball Signed-off-by: Shawn Guo Cc: Acked-by: Chris Ball