Linux kernel source tree https://git.amat.us/linux/atom/Documentation/devicetree?h=v3.8 2013-01-23T09:30:44Z 2013-01-23T09:30:44Z Richard Genoud richard.genoud@gmail.com 2013-01-18T16:38:43Z urn:sha1:45976c01b7be338efc9d3c911293491a981ed87a The relation between PIN_BANK numbers and pio letters wasn't made very clear. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 2013-01-09T02:53:56Z Linus Torvalds torvalds@linux-foundation.org 2013-01-09T02:53:56Z urn:sha1:974b33586b4bbbdab33c666417f9ba9ef50b62c3 Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ... 2013-01-08T16:39:00Z Olof Johansson olof@lixom.net 2013-01-08T16:39:00Z urn:sha1:2d9e02cad61c49798d9d36b9d87739c279fd6b0f From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples 2013-01-06T17:53:00Z Andrew Lunn andrew@lunn.ch 2013-01-06T10:10:35Z urn:sha1:5343527bbfab3f71f64d8ba5d51ce12dec8d82d0 Improve the documentation to clarify level vs edge triggered power off. Improve the comments for level vs edge triggered power off. Make use of gpio_is_valid(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 2013-01-04T05:16:00Z Fabio Estevam fabio.estevam@freescale.com 2012-11-28T15:34:16Z urn:sha1:74250572941ed7cb877efdead5cbf92747242a54 'clock-output-names' is not used in any of the dts/dtsi files for i.mx. Remove it from the examples, so that the example and the real usage in the dtsi files can match. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 2013-01-03T21:10:18Z Linus Torvalds torvalds@linux-foundation.org 2013-01-03T21:10:18Z urn:sha1:5f738967e89584f99c6a11c6bf09b16c50b6a03e Pull pinctrl fixes from Linus Walleij: "A first round of pinctrl fixes for v3.8: - i.MX5 register configuration - Swap a kfree to devm_kfree() to avoid memory corruption in the at91 driver - Add the missing device tree binding doc for the SIRF pin controller - Enable the SIRF GPIO pull up/down configuration from the device tree, it was previously retired from the hard-coded approach. - NULL check for the prcm_base in the Nomadik pin controller. - Provide the prcm_base from the device tree in the DT boot path for the Nomadik pin controller." * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: ARM: ux500: add pinctrl address resources pinctrl: nomadik: return if prcm_base is NULL pinctrl: sirf: enable GPIO pullup/down configuration from dts pinctrl: sirf: add missing DT-binding document pinctrl: fix comment mistake drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration 2013-01-02T11:07:05Z Aaro Koskinen aaro.koskinen@iki.fi 2012-12-23T20:03:37Z urn:sha1:8899b8d93ec64b7a8e54807a68a958e1206535e2 Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 2012-12-26T00:59:53Z Barry Song Baohua.Song@csr.com 2012-12-14T09:15:59Z urn:sha1:fc2b04e7fbd119f4bf41b6821d2f8ce4bf9ae417 commit 7bec207427c2efb794 remove sirfsoc_gpio_set_pull function, this patches takes the feature back by adding sirf,pullups and sirf,pulldowns prop in dts, and the driver will set the GPIO pull according to the dts. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2012-12-26T00:59:52Z Barry Song Baohua.Song@csr.com 2012-12-14T07:24:01Z urn:sha1:408f181e0d4210ef7c77e825289d31fac530291c While sending email to Linus for reviewing: "pinctrl: sirf: add DT-binding pinmux mapping support" https://patchwork.kernel.org/patch/1364361/ i have included the devicetree/bindings/pinctrl/pinctrl-sirf.txt But while sending pull request with commit 056876f6c73406c, i missed the document. this patch takes the document back. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2012-12-22T01:10:29Z Linus Torvalds torvalds@linux-foundation.org 2012-12-22T01:10:29Z urn:sha1:4fe19a136a8871e5fc6e44d72979f18a4968c2ab Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...