linux/Documentation/DocBook, branch v3.16

DocBook: fix various typos

2014-07-12T18:30:36Z

This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds

DocBook: fix mtdnand typos

2014-07-12T18:30:36Z

This patch fixed spelling typo found in DocBook/mtdnand.tmpl. Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds

Documentation: Fix DocBook build with relative $(srctree)

2014-06-18T17:21:42Z

After commits 890676c6 (kbuild: Use relative path when building in the source tree) and 9da0763b (kbuild: Use relative path when building in a subdir of the source tree), the $(srctree) variable can be a relative path. This breaks Documentation/DocBook/media/Makefile, because it tries to create symlinks from a subdirectory of the object tree to the source tree. Fix this by using a full path in this case. Reported-by: Randy Dunlap Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Michal Marek

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-06-12T21:27:40Z

Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2014-06-12T18:32:30Z

Pull drm updates from Dave Airlie: "This is the main drm merge window pull request, changes all over the place, mostly normal levels of churn. Highlights: Core drm: More cleanups, fix race on connector/encoder naming, docs updates, object locking rework in prep for atomic modeset i915: mipi DSI support, valleyview power fixes, cursor size fixes, execlist refactoring, vblank improvements, userptr support, OOM handling improvements radeon: GPUVM tuning and large page size support, gart fixes, deep color HDMI support, HDMI audio cleanups nouveau: - displayport rework should fix lots of issues - initial gk20a support - gk110b support - gk208 fixes exynos: probe order fixes, HDMI changes, IPP consolidation msm: debugfs updates, misc fixes ast: ast2400 support, sync with UMS driver tegra: cleanups, hdmi + hw cursor for Tegra 124. panel: fixes existing panels add some new ones. ipuv3: moved from staging to drivers/gpu" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits) drm/nouveau/disp/dp: fix tmds passthrough on dp connector drm/nouveau/dp: probe dpcd to determine connectedness drm/nv50-: trigger update after all connectors disabled drm/nv50-: prepare for attaching a SOR to multiple heads drm/gf119-/disp: fix debug output on update failure drm/nouveau/disp/dp: make use of postcursor when its available drm/g94-/disp/dp: take max pullup value across all lanes drm/nouveau/bios/dp: parse lane postcursor data drm/nouveau/dp: fix support for dpms drm/nouveau: register a drm_dp_aux channel for each dp connector drm/g94-/disp: add method to power-off dp lanes drm/nouveau/disp/dp: maintain link in response to hpd signal drm/g94-/disp: bash and wait for something after changing lane power regs drm/nouveau/disp/dp: split link config/power into two steps drm/nv50/disp: train PIOR-attached DP from second supervisor drm/nouveau/disp/dp: make use of existing output data for link training drm/gf119/disp: start removing direct vbios parsing from supervisor drm/nv50/disp: start removing direct vbios parsing from supervisor drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal drm/nouveau/disp/dp: create subclass for dp outputs ...

drm/doc: Add the "type" plane property to the list of properties

2014-06-09T23:35:11Z

Matt aded this plane property before we had a table giving a summary of the properties. Add it there. Cc: Matt Roper Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie

drm/doc: Fix nouveau typo

2014-06-09T23:34:43Z

Signed-off-by: Damien Lespiau Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie

Merge tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2014-06-09T22:51:19Z

drm/tegra: Changes for v3.16-rc1 The majority of these changes are a slew of cleanups across the board. A more noteworthy change is the addition of drm_dev_set_unique() and the conversion of the Tegra DRM driver to use it. This allows us to get rid of the host1x drm_bus implementation. Other USB and platform drivers can be changed in a similar way. Unfortunately for most PCI devices there is some userspace that relies on the old functionality and cannot be as easily converted. HDMI and hardware cursor support is added for Tegra124. The SOR output gains support for exposing CRCs via debugfs, which can be used for automated testing. Many values that were hardcoded in the SOR/eDP code are now computed at runtime to increase compatibility with more devices. * tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux: (47 commits) drm/tegra: sor - Remove obsolete comment drm/tegra: sor - Enable only the necessary number of lanes drm/tegra: sor - Power on only the necessary lanes drm/tegra: sor - Do not program interlaced mode registers drm/tegra: sor - Do not hardcode link speed drm/tegra: sor - Do not hardcode number of blank symbols drm/tegra: sor - Don't hardcode link parameters drm/tegra: sor - Change power down ordering drm/tegra: sor - Fix copy/paste error drm/tegra: sor - Remove pixel clock rounding drm/tegra: sor - Make debugfs setup consistent drm/tegra: sor - Recursively remove debugfs tree drm/tegra: dp - Mark the connector as hotplug capable drm/tegra: dp - Implement hotplug detection in work queue drm/tegra: Add hardware cursor support drm/tegra: Remove host1x drm_bus implementation drm: Document how to register devices without struct drm_bus drm: Add device registration documentation drm: Introduce drm_dev_set_unique() gpu: host1x: Rename internal functions for clarity ...

drm: Document how to register devices without struct drm_bus

2014-06-05T21:14:42Z

With the recent addition of the drm_set_unique() function, devices can now be registered without requiring a drm_bus. Add a brief description to the DRM docbook to show how that can be achieved. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding

drm: Add device registration documentation

2014-06-05T21:14:38Z

Describe how devices are registered using the drm_*_init() functions. Adding this to docbook requires a largish set of changes to the comments in drm_{pci,usb,platform}.c since they are doxygen-style rather than proper kernel-doc and therefore mess with the docbook generation. While at it, mark usage of drm_put_dev() as discouraged in favour of calling drm_dev_unregister() and drm_dev_unref() directly. Acked-by: Daniel Vetter Signed-off-by: Thierry Reding