diff options
7 files changed, 480 insertions, 0 deletions
diff --git a/org.handhelds.familiar/classes/debian-vampyre.bbclass b/org.handhelds.familiar/classes/debian-vampyre.bbclass index 9313541..f995ed0 100644 --- a/org.handhelds.familiar/classes/debian-vampyre.bbclass +++ b/org.handhelds.familiar/classes/debian-vampyre.bbclass @@ -14,6 +14,7 @@ DEBIAN_ARCHIVE ?= "main" DEBIAN_BASE_URI = "${DEBIAN_MIRROR}/${DEBIAN_ARCHIVE}/${@bb.data.getVar('PN', d, 1)[0]}/${PN}" SRC_URI = "${DEBIAN_BASE_URI}/${PN}_${DPV}.orig.tar.gz \ ${DEBIAN_BASE_URI}/${PN}_${DPV}-${DPR}.diff.gz;patch=1 " +FILESPATH = "${@base_set_filespath([ "${FILE_DIRNAME}/${PN}-${DPV}-${DPR}", "${FILE_DIRNAME}/${PN}-${DPV}", "${FILE_DIRNAME}/${PN}", "${FILE_DIRNAME}/files", "${FILE_DIRNAME}" ], d)}" do_install_append () { mkdir -p ${D}${datadir}/doc/${PN} diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/defconfig b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/defconfig new file mode 100644 index 0000000..e82baf2 --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/defconfig @@ -0,0 +1,284 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS = $(TARGET_CFLAGS) +LIBS = $(TARGET_LDFLAGS) + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +#CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +#CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +#CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove AES extra functions. This can be used to reduce code size by about +# 1.5 kB by removing extra AES modes that are not needed for commonly used +# client configurations (they are needed for some EAP types). +#CONFIG_NO_AES_EXTRAS=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection +#CONFIG_STAKEY=y + +# Proposed replacement for STAKey negotiation: PeerKey handshake for +# Station to Station Link +CONFIG_PEERKEY=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=gnutls + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomCrypt and TomsFastMath. +#LTC_PATH=/usr/src/libtomcrypt-1.11 +#TFM_PATH=/usr/src/tomsfastmath-0.09 +#CFLAGS += -I$(LTC_PATH)/src/headers +#LIBS += -L$(LTC_PATH) -L$(TFM_PATH) +#LIBS_p += -L$(LTC_PATH) -L$(TFM_PATH) + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for DBus control interface +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# Include client MLME (management frame processing). +# This can be used to move MLME processing of Devicescape IEEE 802.11 stack +# into user space. +#CONFIG_CLIENT_MLME=y +# Currently, driver_devicescape.c build requires some additional parameters +# to be able to include some of the kernel header files. Following lines can +# be used to set these (WIRELESS_DEV must point to the root directory of the +# wireless-dev.git tree). +#WIRELESS_DEV=/usr/src/wireless-dev +#CFLAGS += -I$(WIRELESS_DEV)/include +#CFLAGS += -I$(WIRELESS_DEV)/net/d80211 +#CFLAGS += -D_LINUX_TYPES_H diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-lsb.patch b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-lsb.patch new file mode 100644 index 0000000..b091b3c --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-lsb.patch @@ -0,0 +1,43 @@ +diff -ur wpa_supplicant-0.5.5.debian/debian/wpasupplicant.wpa-ifupdown.init wpa_supplicant-0.5.5/debian/wpasupplicant.wpa-ifupdown.init +--- wpa_supplicant-0.5.5.debian/debian/wpasupplicant.wpa-ifupdown.init 2006-10-20 22:10:27.000000000 +0200 ++++ wpa_supplicant-0.5.5/debian/wpasupplicant.wpa-ifupdown.init 2006-10-20 22:12:00.000000000 +0200 +@@ -22,20 +22,18 @@ + + test -x /sbin/ifdown || exit 0 + +-. /lib/lsb/init-functions +- + stop_wpa_action () { + test -x /sbin/wpa_action || return + unset IFACES + IFACES=$(find /var/run -maxdepth 1 -type f -name 'wpa_action.*.pid' -printf '%P\n' | cut -d'.' -f2) + if test -n "$IFACES"; then +- log_daemon_msg "Stopping wpa_action roaming interfaces" ++ echo -n "Stopping wpa_action roaming interfaces:" + for iface in $IFACES; do +- log_progress_msg "$iface" ++ echo -n " $iface" + # wpa_action executes /sbin/ifdown + wpa_action "$iface" stop >/dev/null 2>&1 + done +- log_end_msg 0 ++ echo '.' + fi + } + +@@ -43,12 +41,12 @@ + unset IFACES + IFACES=$(find /var/run -maxdepth 1 -type f -name 'wpa_supplicant.*.pid' -printf '%P\n' | cut -d'.' -f2) + if test -n "$IFACES"; then +- log_daemon_msg "Stopping wpa_supplicant interfaces" ++ echo -n "Stopping wpa_supplicant interfaces:" + for iface in $IFACES; do +- log_progress_msg "$iface" ++ echo -n " $iface" + ifdown $iface >/dev/null 2>&1 + done +- log_end_msg 0 ++ echo '.' + fi + } + diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-quiet.patch b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-quiet.patch new file mode 100644 index 0000000..6258f41 --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-no-quiet.patch @@ -0,0 +1,19 @@ +diff -ur wpa_supplicant-0.5.5.debian/debian/ifupdown.sh wpa_supplicant-0.5.5/debian/ifupdown.sh +--- wpa_supplicant-0.5.5.debian/debian/ifupdown.sh 2006-10-20 21:22:56.000000000 +0200 ++++ wpa_supplicant-0.5.5/debian/ifupdown.sh 2006-10-20 21:23:35.000000000 +0200 +@@ -62,13 +62,13 @@ + + # master function; determines if ifupdown.sh should do something or not + if [ -s "$IF_WPA_CONF" ]; then +- WPA_SUP_CONF_CTRL_DIR=$(sed --quiet \ ++ WPA_SUP_CONF_CTRL_DIR=$(sed \ + 's/[[:space:]]*#.*//g;s/[[:space:]]\+.*$//g;s/^\(ctrl_interface\|DIR\)=\(.*\)/\2/p' "$IF_WPA_CONF") + if [ -n "$WPA_SUP_CONF_CTRL_DIR" ]; then + WPA_CTRL_DIR="$WPA_SUP_CONF_CTRL_DIR" + fi + WPA_SUP_CONF="-c $IF_WPA_CONF -C $WPA_CTRL_DIR" +-elif set | grep --quiet "^IF_WPA"; then ++elif set | grep -q "^IF_WPA"; then + WPA_SUP_CONF="-C $WPA_CTRL_DIR" + else + exit 0 diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-standard-sh.patch b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-standard-sh.patch new file mode 100644 index 0000000..5420e70 --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/scripts-standard-sh.patch @@ -0,0 +1,21 @@ +diff -ur wpa_supplicant-0.5.5.debian/debian/functions.sh wpa_supplicant-0.5.5/debian/functions.sh +--- wpa_supplicant-0.5.5.debian/debian/functions.sh 2006-10-20 20:21:16.000000000 +0200 ++++ wpa_supplicant-0.5.5/debian/functions.sh 2006-10-20 20:23:55.000000000 +0200 +@@ -36,7 +36,7 @@ + + # verbosity variables + if [ -n "$IF_WPA_VERBOSITY" ] || [ "$VERBOSITY" = "1" ]; then +- TO_NULL="/dev/stdout" ++ TO_NULL="&1" + DAEMON_VERBOSITY="--verbose" + else + TO_NULL="/dev/null" +@@ -86,7 +86,7 @@ + ;; + "stderr") + shift +- echo "$WPA_SUP_PNAME: $@" >/dev/stderr ++ echo "$WPA_SUP_PNAME: $@" >&2 + ;; + *) + ;; diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/tls-gnutls-api-breakage.patch b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/tls-gnutls-api-breakage.patch new file mode 100644 index 0000000..7b5101c --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant-0.5.5/tls-gnutls-api-breakage.patch @@ -0,0 +1,11 @@ +--- wpa_supplicant-0.5.5/tls_gnutls.c 2006-06-25 03:05:07.000000000 +0200 ++++ wpa_supplicant-0.5.5.new/tls_gnutls.c 2006-10-10 02:22:56.000000000 +0200 +@@ -1030,7 +1030,7 @@ + size_t *out_len) + { + return tls_connection_handshake(ssl_ctx, conn, in_data, in_len, +- out_len); ++ out_len, NULL, NULL); + } + + diff --git a/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant_0.5.5-2.bb b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant_0.5.5-2.bb new file mode 100644 index 0000000..f4b2a8b --- /dev/null +++ b/org.handhelds.familiar/packages/wpa-supplicant/wpasupplicant_0.5.5-2.bb @@ -0,0 +1,101 @@ +# wpasupplicant OE build file +# Copyright (C) 2006, Rene Wagner. All Rights Reserved +# Released under the MIT license (see org.handhelds.familiar/COPYING.MIT) + +DESCRIPTION = "Client support for WPA and WPA2 (IEEE 802.11i)" +SECTION = "net" +LICENSE = "GPL" +HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/" + +DEPENDS = "gnutls" +RDEPENDS_{PN} = "busybox (>= 1.00-r37)" + +RCONFLICTS_${PN} = "wpa-supplicant wpa-supplicant-nossl" +RPROVIDES_${PN} = "wpa-supplicant wpa-supplicant-nossl" +RREPLACES_${PN} = "wpa-supplicant wpa-supplicant-nossl" + +inherit debian-vampyre + +SRC_URI += "file://tls-gnutls-api-breakage.patch;patch=1 \ + file://scripts-standard-sh.patch;patch=1 \ + file://scripts-no-quiet.patch;patch=1 \ + file://scripts-no-lsb.patch;patch=1 \ + file://defconfig" +S = "${WORKDIR}/wpa_supplicant-${DPV}" + +do_configure () { + install -m 0755 ${WORKDIR}/defconfig .config +} + +do_compile () { + make +} + +base_sbin_apps = "wpa_supplicant wpa_cli" +bin_apps = "wpa_passphrase" +network_dirs = "if-down.d if-post-down.d if-pre-up.d if-up.d" +man5 = "wpa_supplicant.conf.5" +man8 = "wpa_background.8 wpa_cli.8 wpa_passphrase.8 wpa_supplicant.8" +debian_man8 = "wpa_action.8" +gz_docs = "ChangeLog README" +examples = "ieee8021x.conf plaintext.conf wep.conf wpa-psk-tkip.conf wpa2-eap-ccmp.conf" +debian_examples = "wpa_supplicant.conf.template wpa_supplicant.init-daemon" + +do_install () { + # binaries + install -d ${D}${base_sbindir} + for i in ${base_sbin_apps}; do + install -m 0755 $i ${D}${base_sbindir} + done + install -m 0755 debian/wpa_action.sh ${D}${base_sbindir}/wpa_action + + install -d ${D}${bindir} + for i in ${bin_apps}; do + install -m 0755 $i ${D}${bindir} + done + + # ifupdown scripts + install -d ${D}${sysconfdir}/wpa_supplicant + for i in functions.sh ifupdown.sh; do + install -m 0755 debian/$i ${D}${sysconfdir}/wpa_supplicant + done + for i in ${network_dirs}; do + install -d ${D}${sysconfdir}/network/$i + (cd ${D}${sysconfdir}/network/$i && ln -s ../../wpa_supplicant/ifupdown.sh wpasupplicant) + done + + # init script (only for manual stop|reload) + install -d ${D}${sysconfdir}/init.d + install -m 0755 debian/wpasupplicant.wpa-ifupdown.init ${D}${sysconfdir}/init.d/wpa-ifupdown + + # man pages + install -d ${D}${mandir} + install -d ${D}${mandir}/man5 + for i in ${man5}; do + install -m 0644 doc/docbook/$i ${D}${mandir}/man5 + gzip -9 ${D}${mandir}/man5/$i + done + install -d ${D}${mandir}/man8 + for i in ${man8}; do + install -m 0644 doc/docbook/$i ${D}${mandir}/man8 + gzip -9 ${D}${mandir}/man8/$i + done + for i in ${debian_man8}; do + install -m 0644 debian/$i ${D}${mandir}/man8 + gzip -9 ${D}${mandir}/man8/$i + done + + # docs and examples + install -d ${D}${docdir}/wpasupplicant + for i in ${gz_docs}; do + install -m 0644 $i ${D}${docdir}/wpasupplicant + gzip -9 ${D}${docdir}/wpasupplicant/$i + done + install -d ${D}${docdir}/wpasupplicant/examples + for i in ${examples}; do + install -m 0644 examples/$i ${D}${docdir}/wpasupplicant/examples + done + for i in ${debian_examples}; do + install -m 0644 debian/$i ${D}${docdir}/wpasupplicant/examples + done +} |