path: root/docs/paper.tex

\documentclass[11pt]{proc}
%\documentclass[preprint,10pt]{sigplanconf}

\usepackage{amsmath}
\usepackage{url}

\begin{document}

%\conferenceinfo{Splash '11}{??-2011, Portland.} 
%\copyrightyear{2011} 
%\copyrightdata{[to be supplied]} 

%\titlebanner{}        % These are ignored unless
%\preprintfooter{(C) 2011 Alon Zakai, Creative Commons BY-SA Licensed}   % 'preprint' option specified.

\title{Emscripten: An LLVM-to-JavaScript Compiler}
%\subtitle{}

%\authorinfo{Alon Zakai}
%           {Mozilla}
%           {azakai@mozilla.com}

\author{Alon Zakai \\ Mozilla \\ \url{azakai@mozilla.com}}

\maketitle

\begin{abstract}
JavaScript is the standard language of the web, supported on essentially
all web browsers. Despite efforts to allow other languages to be run as well,
none have come close to being universally available on all
browsers, which severely limits their usefulness on the web. However, there are reasonable reasons why
allowing other languages would be beneficial, including reusing existing code and allowing
developers to use their languages of choice.

We present Emscripten, an LLVM-to-JavaScript compiler. Emscripten compiles
LLVM assembly code into standard JavaScript, which opens up two avenues for running code written
in other languages on the web: (1) Compile a language directly into LLVM, and
then compile that into JavaScript using Emscripten, or (2) Compiling
a language's entire runtime (typically written in C or C++) into JavaScript using Emscripten, and
using the compiled runtime to run code written in that language. Examples of languages
that can use the first approach are C and C++, as compilers exist for them into LLVM. An example
of a language that can use the second approach is Python, and Emscripten has
been used to compile CPython (the standard C implementation of Python) into JavaScript,
allowing standard Python code to be run on the web, which was not previously
possible.

Emscripten itself is written in JavaScript (to enable various
dynamic compilation techniques), and is available under the MIT
license (a permissive open source license), at \url{http://www.emscripten.org}.
As an LLVM-to-JavaScript compiler, the challenges in designing
Emscripten are somewhat the reverse of the norm -- one must go from a low-level
assembly into a high-level language, and recreate parts of the original
high-level structure of the code that were lost in the compilation to
low-level LLVM. We detail the algorithms used in
Emscripten to deal with those challenges.

\end{abstract}

%\category{CR-number}{subcategory}{third-level}

%\terms
%term1, term2

%\keywords
%keyword1, keyword2

\bigskip

\copyright 2011 Alon Zakai. License: Creative Commons Attribution-ShareAlike (CC BY-SA), \url{http://creativecommons.org/licenses/by-sa/3.0/}

\section{Introduction}

Since the mid 1990's, JavaScript has been present in most web browsers (sometimes
with minor variations and under slightly different names, e.g., JScript in Internet
Explorer), and today it is
well-supported on essentially all web browsers, from desktop browsers like
Internet Explorer, Firefox, Chrome and Safari, to mobile browsers on smartphones
and tablets. Together with HTML and CSS, JavaScript is the standards-based
foundation of the web.

Running other programming languages on the web has been suggested many times,
and browser plugins have allowed doing so, e.g., via the Java
and Flash plugins. However, plugins must be manually installed and do not integrate in
a perfect way with the outside HTML. Perhaps more problematic is that they cannot run
at all on some platforms, for example, Java and Flash cannot run on iOS devices such as the iPhone
and iPad. For those reasons, JavaScript remains
the primary programming language of the web.

There are, however, justifiable motivations for running code from
other programming languages on the web, for example, if one has a large
amount of existing code already written in another language, or if one
simply has a strong preference for another language (and perhaps is
more productive in it).

As a consequence, there have been some efforts to compile languages
\textbf{into} JavaScript. Since JavaScript is present in essentially all web
browsers, by compiling one's language of choice into JavaScript, one
can still generate content that will run practically everywhere.
Examples of this approach include the Google Web Toolkit, which compiles
Java into JavaScript; Pyjamas, which compiles Python into JavaScript;
Script\# and jsc, % http://jsc.sourceforge.net/
which compile .NET assemblies into JavaScript; and there are rumors
about an Oracle project to translate JVM bytecode into JavaScript.

In this paper we present another project along those lines: \textbf{Emscripten},
which compiles LLVM assembly into JavaScript. LLVM (Low Level Virtual
Machine) is a compiler project primarily focused on C, C++ and
Objective-C. It compiles those languages through a \emph{frontend} (the
main ones of which are Clang and LLVM-GCC) into the
LLVM intermediary representation (which can be machine-readable
bitcode, or human-readable assembly), and then passes it
through a \emph{backend} which generates actual machine code for a particular
architecure. Emscripten plays the role of a backend which targets JavaScript.

By using Emscripten, potentially many languages can be
run on the web, using one of the following methods:
\begin{itemize}
\item Compile \textbf{code} in a language recognized by one of the existing LLVM frontends
      into LLVM, and then compile that
      into JavaScript using Emscripten. Frontends for various languages
      exist, including many of the most popular programming languages such as C and
      C++, and also various new and emerging languages (e.g., Rust).
\item Compile the \textbf{runtime} used to parse and execute code in
      a particular language into LLVM, then compile that into JavaScript using
      Emscripten. It is then possible to run code in that runtime on the web.
      This is a useful approach if
      a language's runtime is written in a language for which an LLVM
      frontend exists, but the language iself has no such frontend. For
      example, no currently-supported frontend exists for Python, however
      it is possible to compile CPython -- the standard implementation of
      Python, written in C -- into JavaScript, and run Python code on that
      (see Subsection X.Y).
\end{itemize}

From a technical standpoint, the main challenges in designing and implementing
Emscripten are that it compiles a low-level language -- LLVM assembly -- into
a high-level one -- JavaScript. This is somethat the reverse of the usual
situation one is in when building a compiler, and leads to some unique
difficulties. For example, to get good performance in JavaScript one must
use natural JavaScript code flow structures, like loops and ifs, but
those structures do not exist in LLVM assembly (instead, what is present
there is essentially `flat' code with \emph{goto} commands).
Emscripten must therefore reconstruct a high-level
representation from the low-level data it receives.

In theory that issue could have been avoided by compiling a higher-level
language into JavaScript. For example, if compiling Java into JavaScript
(as the Google Web Toolkit does), then one can benefit from the fact
that Java's loops, ifs and so forth generally have a very direct parallel
in JavaScript (of course the downside is that this approach yields a
compiler only for Java). Compiling LLVM into JavaScript is less straightforward,
but wee will see later that it is possible to reconstruct
a substantial part of the high-level structure of the original code.

We conclude this introduction with a list of this paper's main contributions:
\begin{itemize}
\item We describe Emscripten itself, during
      which we detail its approach in compiling LLVM into JavaScript.
\item We give details of Emscripten's `Relooper' algorithm, which generates
      high-level loop structures from low-level branching data. We are
      unaware of related results in the literature.
\end{itemize}
In addition, the following are the main contributions of Emscripten
itself, that to our knowledge were not previously possible:
\begin{itemize}
\item It allows compiling a very large subset of C and C++ code into
      JavaScript, which can then be run on the web.
\item By compiling their runtimes, it allows running languages such as Python
      on the web.
\end{itemize}

The remainder of this paper is structured as follows. In Section 2 we
describe, from a high level, the approach taken to compiling LLVM assembly into JavaScript.
In Section 3 we describe the workings of Emscripten on a lower, more
concrete level. In Section 4 we give an overview of some uses of
Emscripten. In Section 5 we summarize and give directions for future
work on Emscripten and uses of it.

\section{Compilation Approach}

Let us begin by considering what the challenge is, when we want to compile something
into JavaScript. Assume we are given the
following simple example of a C program, which we want to compile into JavaScript:
\begin{verbatim}
  #include <stdio.h>
  int main()
  {
    int sum = 0;
    for (int i = 1; i < 100; i++)
      sum += i;
    printf("1+...+100=%d\n", sum);
    return 0;
  }
\end{verbatim}
This program calculates the sum of the integers from 1 to 100. When
compiled by Clang, the generated LLVM
assembly code includes the following:
\begin{verbatim}
@.str = private constant [14 x i8]
        c"1+...+100=%d\0A\00"

define i32 @main() {
  %1 = alloca i32, align 4
  %sum = alloca i32, align 4
  %i = alloca i32, align 4
  store i32 0, i32* %1
  store i32 0, i32* %sum, align 4
  store i32 1, i32* %i, align 4
  br label %2

; <label>:2
  %3 = load i32* %i, align 4
  %4 = icmp slt i32 %3, 100
  br i1 %4, label %5, label %12

; <label>:5
  %6 = load i32* %i, align 4
  %7 = load i32* %sum, align 4
  %8 = add nsw i32 %7, %6
  store i32 %8, i32* %sum, align 4
  br label %9

; <label>:9
  %10 = load i32* %i, align 4
  %11 = add nsw i32 %10, 1
  store i32 %11, i32* %i, align 4
  br label %2

; <label>:12
  %13 = load i32* %sum, align 4
  %14 = call i32 (i8*, ...)*
        @printf(i8* getelementptr inbounds
          ([14 x i8]* @.str, i32 0, i32 0),
          i32 %13)
  ret i32 0
}
\end{verbatim}
At first glance, this may look more difficult to translate into
JavaScript than the original C++. However, compiling C++ in
general would require writing code to handle preprocessing,
classes, templates, and all the idiosyncrasies and complexities
of C++. LLVM assembly, while more verbose in this example, is
lower-level and simpler to work on. It also has the benefit we
mentioned earlier, which
is one of the main goals of Emscripten, that many languages can
be compiled into LLVM.

A detailed overview of LLVM assembly is beyond our scope here. Briefly,
though, the example assembly above can easily be seen to define a
function main(), then allocate some values on the stack (alloca),
then load and store various values (load and store). We do not have
the high-level code structure as we had in C++, with a loop, instead
we have code `fragments', each with a label, and code flow moves
from one to another by branch (br) instructions. (Label 2 is the
condition check in the loop; label 5 is the body, label 9 is the
increment, and label 12 is the final part of the function, outside
of the loop).
Conditional branches
can depend on calculations, for example the results of comparing
two values (icmp). Other numerical operations include addition (add).
Finally, printf is called (call). The challenge, then, is to convert
this and things like it into JavaScript.

In general, Emscripten's approach is to translate each line of LLVM
assembly into JavaScript, 1 for 1, into `normal' JavaScript
as much as possible. So, for example, an \emph{add} operation becomes
a normal JavaScript addition, a function call becomes a JavaScript
function call, etc. This 1 to 1 translation generates JavaScript
that resembles assembly code, for example, the LLVM assembly shown
before for main() would be compiled into the following:
\begin{verbatim}
function _main() {
  var __stackBase__  = STACKTOP;
  STACKTOP += 12;
  var __label__ = -1;
  while(1) switch(__label__) {
    case -1:
      var $1 = __stackBase__;
      var $sum = __stackBase__+4;
      var $i = __stackBase__+8;
      HEAP[$1] = 0;
      HEAP[$sum] = 0;
      HEAP[$i] = 0;
      __label__ = 0; break;
    case 0:
      var $3 = HEAP[$i];
      var $4 = $3 < 100;
      if ($4) { __label__ = 1; break; }
      else    { __label__ = 2; break; }
    case 1:
      var $6 = HEAP[$i];
      var $7 = HEAP[$sum];
      var $8 = $7 + $6;
      HEAP[$sum] = $8;
      __label__ = 3; break;
    case 3:
      var $10 = HEAP[$i];
      var $11 = $10 + 1;
      HEAP[$i] = $11;
      __label__ = 0; break;
    case 2:
      var $13 = HEAP[$sum];
      var $14 = _printf(__str, $13);
      STACKTOP = __stackBase__;
      return 0;
  }
}
\end{verbatim}
Some things
to take notice of:
\begin{itemize}
\item A switch-in-a-loop construction is used in order to let the flow
      of execution move between fragments of code in an arbitrary manner: We set
      \emph{\_\_label\_\_} to the (numerical representation of the) label of
      the fragment we want to reach, and do a break, which leads to the proper
      fragment being reached. Inside each fragment, every line of code corresponds to a line of
      LLVM assembly, generally in a very straightforward manner. 
\item Memory is implemented by \emph{HEAP}, a JavaScript array. Reading from
      memory is a read from that array, and writing to memory is a write.
      \emph{STACKTOP} is the current position of the stack. (Note that we
      allocate 4 memory locations for 32-bit integers on the stack, but only 
      write to 1 of them. See the Load-Store Consistency subsection below for why.)
\item LLVM assembly functions become JavaScript functions, and function calls
      are normal JavaScript function calls. In general, we attempt to generate
      as `normal' JavaScript as possible.
\end{itemize}

\subsection{Load-Store Consistency (LSC)}

We saw before that Emscripten's memory usage allocates the usual number
of bytes on the stack for variables (4 bytes for a 32-bit integer, etc.).
However, we only wrote values into the first location, which appeared odd.
We will now see the reason for that.

To get there, we must first step back, and note that
Emscripten does not aim to achieve perfect compatibility with all possible
LLVM assembly (and correspondingly, with all possible C or C++ code, etc.);
instead, Emscripten targets a subset of LLVM assembly code, which is portable
and does not make crucial assumptions about the underlying CPU architecture
on which the code is meant to run. That subset is meant to encompass the
vast majority of real-world code that would be compiled into LLVM,
while also being compilable into very
performant JavaScript.

More specifically, Emscripten assumes that the LLVM assembly code it is
compiling has \textbf{Load-Store Consistency} (LSC), which is the requirement that
loads from and stores to a specific memory address will use the same type. Normal C and C++
code generally does so: If $x$ is a variable containing a 32-bit floating
point number, then both loads and stores of $x$ will be of 32-bit floating
point values, and not 16-bit unsigned integers or anything else. (Note that
even if we write something like \begin{verbatim}float x = 5\end{verbatim} then the
compiler will assign a 32-bit float with the value of 5 to $x$, and not
an integer.)

To see why this is important for performance, consider the following
C code fragment, which does \emph{not} have LSC:
\begin{verbatim}
  int x = 12345;
  [...]
  printf("first byte: %d\n", *((char*)&x));
\end{verbatim}
Assuming an architecture with more than 8 bits, this code will read
the first byte of \emph{x}. (It might, for example, be used to detect the
endianness of the CPU.) To compile this into JavaScript in
a way that will run properly, we must do more than a single operation
for either the read or the write, for example we could do this:
\begin{verbatim}
  var x_value = 12345;
  var x_addr = stackAlloc(4);
  HEAP[x_addr]   = (x_value >> 0) & 255;
  HEAP[x_addr+1] = (x_value >> 8) & 255;
  HEAP[x_addr+2] = (x_value >> 16) & 255;
  HEAP[x_addr+3] = (x_value >> 24) & 255;
  [...]
  printf("first byte: %d\n", HEAP[x_addr]);
\end{verbatim}
Here we allocate space for the value of \emph{x} on the stack, and
store that address in \emph{x\_addr}. The stack itself is part of
the `memory space', which is the array \emph{HEAP}. In order for
the read on the final line to give the proper value, we must go to
the effort of doing 4 store operations, each of the value of a
particular byte. In other words, \emph{HEAP} is an array of bytes,
and for each store into memory, we must deconstruct the value into
bytes.\footnote{Note that we can use JavaScript typed arrays with a shared memory
buffer, which would work as expected, assuming (1) we are running
in a JavaScript engine which supports typed arrays, and (2) we
are running on a CPU with the same architecture as we expect. This
is therefore dangerous as the generated code may run differently on
different JavaScript engines and different CPUs.
Emscripten currently has optional experimental support for typed arrays.}

Alternatively, we can store the value in a single operation, and
deconstruct into bytes as we load. This will be faster in some
cases and slower in others, but is still more overhead
than we would like, generally speaking -- for if the code \textbf{does} have
LSC, then we can translate that code fragment into
the far more optimal
\begin{verbatim}
  var x_value = 12345;
  var x_addr = stackAlloc(4);
  HEAP[x_addr] = x_value;
  [...]
  printf("first byte: %d\n", HEAP[x_addr]);
\end{verbatim}
(Note that even this can be optimized even more -- we can store
\emph{x} in a normal JavaScript variable. For now though we are
just clarifying why it is useful to assume we are compiling code
that has LSC -- doing so lets us generate shorter and more natural
JavaScript.)

In practice the vast majority of C and C++ code does have LSC. Exceptions
do exist, however, for example:
\begin{itemize}
\item Code that detects CPU features like endianness, the behavior of floats, etc. In general such code can be disabled
      before running it through Emscripten, as it is not needed.
\item \emph{memset} and related functions typically work on values of one kind,
      regardless of the underlying values. For example, memset may write 64-bit
      values on a 64-bit CPU since that is usually faster than writing individual
      bytes. This tends to
      not be a problem, as with \emph{memset} the most common case is setting to
      0, and with \emph{memcpy}, the values end up copied properly anyhow.
\item Even LSC-obeying C or C++ code may turn into LLVM assembly that does not,
      after being optimized. For example, when storing two 32-bit integers constants into
      adjoining locations in a structure, the optimizer may generate a single
      64-bit store of an appropriate constant. In other words, optimization can
      generate nonportable code, which runs faster on the current CPU, but
      nowhere else. Emscripten currently assumes that optimizations of this form
      are not being used.
\end{itemize}
In practice it may be hard to know if code has LSC or not, and requiring
a time-consuming code audit is obviously impractical. Emscripten therefore has
automatic tools to detect violations of LSC, see SAFE\_HEAP in Subsection X.Y.

Note that it is somewhat wasteful to allocation 4 memory locations for
a 32-bit integer, and use only one of them. It is possible to change
that behavior with the QUANTUM\_SIZE parameter to Emscripten, however,
the difficulty is that LLVM assembly has hardcoded values that depend on
the usual memory sizes being used. For example, \emph{memcpy} can be
called with the normal size each the value would have, and not a single
memory address each as Emscripten would prefer. We are looking into modifications
to LLVM itself to remedy that.

\subsection{Performance}

When comparing the example program from before (that counts the
integers from 1 to 100), the generated code was fairly complicated
and cumbersome, and unsurprisingly it performs quite poorly. There
are two main reasons for that: First, that the code is simply
unoptimized -- there are many variables declared when fewer could
suffice, for example, and second, that the code does not use `normal'
JavaScript, which JavaScript engines are optimized for -- it
stores all variables in an array (not normal JavaScript variables),
and it controls the flow of execution using a switch-in-a-loop, not
normal JavaScript loops and ifs.

Emscripten's approach to generating fast-performing code is as
follows. Emscripten doesn't do any
optimization that can otherwise be done by additional tools:
LLVM can be used to perform optimizations before Emscripten, and
the Closure Compiler can perform optimizations on the generated JavaScript afterwards. Those
tools will perform standard useful optimizations like removing unneeded variables, dead code, etc.
That leaves two major optimizations that are left for Emscripten
to perform:
\begin{itemize}
\item \textbf{Variable nativization}: Convert variables
      that are on the stack into native JavaScript variables. In general,
      a variable will be nativized unless it is used
      outside that function, e.g., if its address is taken and stored somewhere
      or passed to another function. When optimizing, Emscripten tries to nativize
      as many variables as possible.
\item `\textbf{Relooping}': Recreate high-level loop and if structures
      from the low-level labels and branches that appear in LLVM assembly.
      We detail the algorithm Emscripten uses for this purpose in Section X.
\end{itemize}

When run with Emscripten's optimizations, the above code looks
like this:
\begin{verbatim}
function _main() {
  var __label__;
  var $1;
  var $sum;
  var $i;
  $1 = 0;
  $sum = 0;
  $i = 0;
  $2$2: while(1) { // $2
    var $3 = $i;
    var $4 = $3 < 100;
    if (!($4)) { __label__ = 2; break $2$2; }
    var $6 = $i;
    var $7 = $sum;
    var $8 = $7 + $6;
    $sum = $8;
    var $10 = $i;
    var $11 = $10 + 1;
    $i = $11;
    __label__ = 0; continue $2$2;
  }
  var $13 = $sum;
  var $14 = _printf(__str, $13);
  return 0;
}
\end{verbatim}
If in addition the Closure Compiler is run on that output, we get
\begin{verbatim}
function K() {
  var a, b;
  b = a = 0;
  a:for(;;) {
    if(!(b < 100)) {
      break a
    }
    a += b;
    b += 1;
  }
  _printf(J, a);
  return 0;
}
\end{verbatim}
which is fairly close to the original C++ (the differences, of
having the loop's condition inside the loop instead of inside
the for() expression at the top of the original loop, are not important to performance). Thus, it is possible
to recreate the original high-level structure of the code that
was compiled into LLVM assembly, despite that structure not being
explicitly available to Emscripten.

We will see performance measurements in Section 4.

\subsection{Dealing with Real-World Code}

As mentioned above, in practice it may be hard to know if code has LSC or not,
and other difficulties may arise as well. Accordingly, Emscripten has a set of
tools to help detect if compiled code has certain problems. These are mainly
compile-time options that lead to additional runtime checks. One then runs
the code and sees the warnings or errors generated. The debugging tools include:
\begin{itemize}
\item \textbf{SAFE\_HEAP}: This option adds runtime checks for LSC. It will
      raise an exception if LSC does not hold, as well as related issues like
      reading from memory before a value was written (somewhat similarly to tools
      like Valgrind). If such a problem
      occurs, possible solutions are to ignore the issue (if it has no actual
      consqeuences), or altering the source code. In
      some cases, such nonportable code can be avoided in a simple manner by changing the configutation under
      which the code is built (see the examples in Section X).
\item \textbf{CHECK\_OVERFLOWS}: This option adds runtime checks for overflows in integer operations,
      which are an issue since all JavaScript numbers are doubles, hence simple translation
      of LLVM numerical operations (addition, multiplication, etc.) into JavaScript ones may lead
      to different results than expected. \textbf{CHECK\_OVERFLOWS} will add runtime checks for
      actual overflows of this sort, that is, whether the result of an operation is a value too large for the type it defined as.
      Code that has such overflows can enable \textbf{CORRECT\_OVERFLOWS}, which fixes overflows at
      runtime. The cost, however, is decreased speed due to the correction operations (which perform
      a bitwise AND to force the value into the proper range). Since such
      overflows are rare, it is possible to use this option to find where they
      occur, and modify the original code in a suitable way (see the examples in Section).
\end{itemize}

\section{Emscripten's Architecture}

In the previous section we saw a general overview of Emscripten's approach
to compiling LLVM assembly into JavaScript. We will now get into more detail
into how Emscripten implements that approach and its architecture.

Emscripten is written in JavaScript. A main reason for that decision
was to simplify sharing code between the compiler and the runtime, and
to enable various dynamic compilation techniques. Two simple examples: (1)
The compiler can create JavaScript objects that represent constants in
the assembly code, and convert them to a string using JSON.stringify()
in a convenient manner,
and (2) The compiler can simplify numerical operations by simply
eval()ing the code (so ``1+2'' would become ``3'', etc.). In both examples,
writing Emscripten is made simpler by having the exact same environment
during compilation as the executing code will have.

Emscripten has three main phases:
\begin{itemize}
\item The \textbf{intertyper}, which converts from LLVM assembly into
      Emscripten's internal representation.
\item The \textbf{analyzer}, which inspects the internal representation
      and generates various useful information for the final phase,
      including type and variable information, stack usage analysis,
      optional data for optimizations
      (variable nativization and relooping), etc.
\item The \textbf{jsifier}, which does the final conversion of the
      internal representation plus additional analyzed data into JavaScript.
\end{itemize}

\subsection{The Runtime Environment}

Code generated from Emscripten is meant to run in a JavaScript engine,
typically in a web browser. This has implications for the kind of
runtime environment we can generate for it, for example, there is no
direct access to the local filesystem.

Emscripten comes with a partial implementation of a C library,
mostly written from scratch in JavaScript, which parts compiled from the
newlib C library. Some aspects of the runtime environment, as
implemented in that C library, are:
\begin{itemize}
\item Files to be read must be `preloaded' in JavaScript. They can
      then be accessed using the usual C library methods (fopen, fread, etc.).
      Files that are written are cached, and can be read by JavaScript
      later. While limiting, this approach can often be sufficient for
      many purposes.
\item Emscripten allows writing pixel data to an HTML5 canvas element,
      using a subset of the SDL API. That is, one can write an application in C or C++ using
      SDL, and that same application can be compiled normally and run
      locally, or compiled using Emscripten and run on the web. See
      the raytracing demo at \url{http://syntensity.com/static/raytrace.html}.
\item \emph{sbrk} is implemented using the \textbf{HEAP} array which
      was mentioned previously. This allows a normal \emph{malloc}
      implementation written in C to be compiled to JavaScript.
\end{itemize}

\subsection{The Relooper: Recreating high-level loop structures}

The Relooper is among the most complicated components in Emscripten. It receives
a `soup of labels', which is a set of labeled fragments of code -- for brevity we call such fragments simply `labels' -- each
ending with a branch operation (either a simple branch, a conditional branch, or a switch), and the goal is to generate normal
high-level JavaScript code flow structures such as loops and ifs.

For example, the LLVM assembly on page X has the following label
structure:
\begin{verbatim}
          /-----------\
          |           |
          V           |
ENTRY --> 2 --> 5 --> 9
          |
          V
         12
\end{verbatim}
In this simple example, it is fairly straightforward to see that a natural way to implement it
using normal loop structures is
\begin{verbatim}
ENTRY
while (true) do
  2
  if (condition) break
  5
  9
12
\end{verbatim}
In general though, this is not always easy or even possible -- there may
not be a reasonable high-level loop structure corresponding to the low-level one, if
for example the original C code relied heavily on \emph{goto} instructions.
In practice, however, almost all real-world C and C++ code tends to
be amenable to loop recreation.

Emscripten's Relooper takes as input a `soup of labels' as described above,
and generates a structured set of code `blocks', which are each a set of labels,
with some logical structure, of one of the following types:
\begin{itemize}
\item \textbf{Simple block}: A block with one internal label and a Next
      block, which the internal label branches to. The block is later
      translated simply into the code for that label, and the Next
      block appears right after it.
\item \textbf{Loop}: A block that represents an infinite loop, comprised of
      two internal sub-blocks:
  \begin{itemize}
  \item \textbf{Inner}: A block of labels that will appear inside
        the loop, i.e., when execution reaches the end of that block,
        flow will return to the beginning. Typically a loop will contain
        a conditional \emph{break} defining where it is exited. When we
        exit, we reach the Next block, below.
  \item \textbf{Next}: A block of labels that will appear just outside
        the loop, in other words, that will be reached when the loop is exited.
  \end{itemize}
\item \textbf{Multiple}: A block that represents an divergence into several
      possible branches, that eventually rejoin. A Multiple block can
      implement an `if', an `if-else', a `switch', etc. It is comprised of
  \begin{itemize}
  \item \textbf{Handled blocks}: A set of blocks to which execution can
        enter. When we reach the multiple block, we check which of them
        should execute, and go there. When execution of that block is
        complete, or if none of the handled blocks was selected for
        execution, we proceed to the Next block, below.
  \item \textbf{Next}: A block of labels that will appear just outside
        this one, in other words, that will be reached after code flow
        exits the Handled blocks, above.
  \end{itemize}
\end{itemize}
Remember that we have a \emph{\_\_label\_\_} variable that helps control
the flow of execution: Whenever we enter a block with more than one
entry, we set \emph{\_\_label\_\_} before we branch into it, and we
check its value when we enter that block. So, for example, when we
create a Loop block, it's Next block can have multiple entries -- any
label to which we branch out from the loop. By creating a Multiple
block after the loop, we can enter the proper label when the loop is
exited. Having a \emph{\_\_label\_\_} variable does add some overhead,
but it greatly simplifies the problem that the Relooper needs to solve.
Of course, it is possible to optimize
away writes and reads to \emph{\_\_label\_\_} in many cases.

Emscripten uses the following recursive algorithm for generating
blocks from the soup of labels:

\begin{itemize}
\item Receive a set of labels and which of them are entry points.
      We wish to create a block comprised of all those labels.
\item Calculate, for each label, which other labels it \emph{can}
      reach, i.e., which labels we are able to reach if we start
      at the current label and follow one of the possible paths
      of branching.
\item If we have a single entry, and cannot return to it from
      any other label, then create a Simple block, with the entry
      as its internal label, and the Next block comprised of all
      the other labels. The entries for the Next block are the entry
      to which the internal label can branch.
\item If we can return to all of the entries, return a
      Loop block, whose Inner block is comprised of all labels that
      can reach one of the entries, and whose Next block is
      comprised of all the others. The entry labels for the current
      block become entry labels for the Inner block (note that
      they must be in the Inner block, as each one can reach
      itself). The Next block's entry labels are all the labels
      in the Next block that can be reached by the Inner block.
\item If we have more than one entry, try to create a Multiple block: For each entry, find all
      the labels it reaches that cannot be reached by any other
      entry. If at least one entry has such labels, return a
      Multiple block, whose Handled blocks are blocks for those
      labels, and whose Next block is all the rest. Entry labels
      for those two blocks become entries of the new block they are now part of.
      We may have additional entry labels in the Next block, for
      each entry in the Next block that can be reached from the Handled ones.
\item We must be able to return to at least one of the entries (see proof below), so create
      a Loop block as described above.
\end{itemize}
Note that we first create a loop only if we must, then try to create a
multiple, then create a loop if we can. We could have slightly simplified this in
various ways. The algorithm as presented above has given overall better
results in practice, in terms of the `niceness' of the shape of the
generated code, both subjectively and in some benchmarks (however,
the benchmarks are limited, and we cannot be sure the result will
remain true for all possible inputs to the Relooper).

Additional details of the algorithm include `fixing' branch
instructions accordingly. For example, when we create a Loop
block, then all branch instructions outside of the loop are
converted into \emph{break} commands, and all branch
instructions to the beginning of the loop are converted into
\emph{continue} commands. Those commands are then
ignored when called recursively to generate the Inner block (that is,
the \emph{break} and \emph{continue}
commands are guaranteed, by the semantics of JavaScript, to get us to
where we need to go -- they do not need any further consideration
for them to work properly).

Emscripten also does an additional pass after running the Relooper algorithm
which has been described. The Relooper is guaranteed to produce valid output (see below).
The second pass takes that valid output and optimizes it, by
making minor changes such as removing
\emph{continue} commands that occur at the very end of loops
(where they are not needed), etc. In other words, the first pass focuses on
generating high-level code flow structures that are correct,
while the second pass simplifies and optimizes that structure.

We now turn to an analysis of the Relooper algorithm. It is straightforward to see that the output of the algorithm,
assuming it completes successfully -- that is, that if finishes in finite time, and does
not run into an error in the last part (where it is claimed that
if we reach it we can return to at least one of the entry labels) --
is correct in the sense of code execution being carried out
as in the original data. We will now prove that the algorithm must
in fact complete successfully.

First, note that if we
successfully create a block, then we simplify the remaining
problem, where the `complexity' of the problem for our purposes
now is the sum of labels plus the some of branching operations:
\begin{itemize}
\item This is trivial for Simple blocks (since we now have a Next block
which is strictly smaller).
\item It is true for loop blocks simply by removing branching
operations (there must be a branching back to an entry, which
becomes a \emph{continue}).
\item For multiple blocks, if the Next block is non-empty then we have split into strictly
smaller blocks (in number of labels) than before. If the next block
is empty, then since we built the Multiple block from a set of labels
with more than one entry, then the Handled blocks are strictly smaller
than the current one. The remaining case is when we have a single entry.
\end{itemize}
The remaining issue is whether we can reach a situation where we
fail to create a block due to an error, that is, that the claim in the last
part does not hold. For that to occur, we must not be able
to return to any of the entries (or else we would create a Loop
block). But since that is so, we can, at minimum, create a Multiple
block with entries for all the current entries, since the entry
labels themselves cannot be reached, contradicting the assumption
that we cannot create a block, and concluding the proof.

We have not, of course, proven that the shape of the blocks is optimal
in any sense. However, even if it is possible to optimize them, the Relooper
already gives a very substantial speedup due to the move from the switch-in-a-loop
construction to more natural JavaScript code flow structures. TODO: A little data here.



\section{Example Uses}

Emscripten has been run successfully on several real-world codebases, including
the following:

TODO: Performance data

\subsection{CPython}

Other ways to run Python on web: pyjamas/pyjs, old pypy-js backend, ?? also
IronPython on Silverlight and Jython in Java. Limitations etc.

CPython is the standard implementation of the Python programming language written
in C. Compiling it in Emscripten is straightforward, except for needing to
change some \textbf{\#defines}, without which CPython creates platform-specific assembly code.

Compilation using llvm-gcc generates approximately 27.9MB of LLVM assembly. After
running Emscripten and the Closure Compiler, the generated JavaScript code is
approximately 2.76MB in size. For comparison, a native binary version of
CPython is approxiately 2.28MB in size, so the two differ by only 21\%.

The \textbf{CORRECT\_OVERFLOWS} option in Emscripten is necessary for proper
operation of the generated code, as Python hash code relies on integer overflows
to work normally.

The demo can be seen live at \url{http://www.syntensity.com/static/python.html}.
Potential uses include ... etc.

\subsection{Bullet Physics Engine}

Mention other bullet->js manual port, via Java

\subsection{Lua}

Mention other lua->js compilers

\section{Summary}

We presented Emscripten, an LLVM-to-JavaScript compiler, which opens up
numerous opportunities for running code written in languages other
than JavaScript on the web, including some not previously possible.
Emscripten can be used to, among other
things, compile real-world C and C++ code and run that on the web. In
turn, by compiling the runtimes of languages implemented in C and C++,
we can run them on the web as well. Examples were shown for Python and
Lua.

One of the main tasks for future work in Emscripten is to broaden it's
standard library. Emscripten currently includes portions of libc and
other standard C libraries, implemented in JavaScript. Portions of
existing libc implementations written themselves in C can also be
compiled into JavaScript using Emscripten, but in general the difficulty
is in creating a suitable runtime environment on the web. For example,
there is no filesystem accessible, nor normal system calls and so forth.
Some of those features can be implemented in JavaScript, in particular
new HTML features like the File API should help.

Another important task is to support multithreading. Emscripten
currently assumes the code being compiled is single-threaded, since
JavaScript does not have support for multithreading (Web Workers allow
multiprocessing, but they do not have shared state, so implementing
threads with them is not trivial). However, it would be possible
to emulate multithreading in a single thread. One approach could be
to not generate native JavaScript control flow structures, and instead
to use a switch-in-a-loop for the entire program. Code can then be
added in the loop to switch every so often between `threads', while
maintaining their state and so forth.

A third important task is to improve the speed of generated code. An
optimal situation would be for code compiled by Emscripten to run at
or near the speed of native code. In that respect it is worth comparing
Emscripten to Portable Native Client (PNaCl), a project in development which aims
to allow an LLVM-like format to be distributed and run securely
on the web, with speed comparable to native code.

Both Emscripten and PNaCl allow running compiled native code on
the web, Emscripten by compiling that code into JavaScript, and
PNaCl by compiling it into an LLVM-like format, which is then
run in a special PNaCl runtime. The major differences
are that Emscripten's generated code can run on all web browsers,
since it is standard JavaScript, while PNaCl's generated code
requires the PNaCl runtime to be installed; another major
difference is that JavaScript engines do not yet run code at
near-native speeds, while PNaCl does. To summarize this comparison, Emscripten's
approach allows the code to be run in more places, while PNaCl's
allows the code to run faster.

However, improvements in JavaScript engines may narrow the speed
gap. In particular, for purposes of Emscripten we do not need to
care about \emph{all} JavaScript, but only the kind generated by
Emscripten. Such code is \textbf{implicitly statically typed}, that is,
types are not mixed, despite JavaScript in general allowing assigning, e.g., an
integer to a variable and later a floating point value or even an object to that same variable. Implicitly statically
typed code can be statically analyzed and converted into
machine code that has no runtime type checks at all. While such
static analysis can be time-consuming, there are practical ways for
achieving similar results quickly, such as tracing and local type inference, which
would help on such code very significantly, and are already in use
or being worked on in mainstream JavaScript engines (e.g., SpiderMonkey).

The limit of such an approach is to perform static analysis on
an entire program compiled by Emscripten, generating highly-optimized
machine code from that. As evidence of the potential in such an
approach, the PyPy project can compile RPython -- something very close to implicitly
statically typed Python -- into C, which can then be compiled
and run at native speed. We may in the future see
JavaScript engines perform such static compilation, when the code
they run is implicitly statically typed, which would allow Emscripten's generated
code to run at native speeds as well. While not trivial, such an
approach is possible, and if accomplished, would mean that
the combination of Emscripten and suitable JavaScript engines will
let people write code in their languages of choice, and run them
at native speeds on the web.

Finally, we conclude with another another avenue for optimization.
Assume that we are compiling a C or C++ runtime of a language
into JavaScript, and that that runtime uses JIT compilation to generate machine code. Typically
code generators for JITs are written for the main CPU architectures, today
x86, x86\_64 and ARM. However, it would be possible for a JIT to
generate JavaScript instead. Thus, the runtime would be compiled using
Emscripten, and it would pass the generated JavaScript to
\emph{eval}. In this
scenario, JavaScript is used as a low-level intermediate representation in
the runtime, and the final conversion to machine code is left to the underlying
JavaScript engine. This approach can potentially allow languages that 
greatly benefit from a JIT (such as Java, Lua, etc.) to be run on the web
efficiently.

%\appendix
%\section{Appendix Title}
%This is the text of the appendix, if you need one.

%\acks

%TODO: Acknowledgments

%\bibliographystyle{abbrvnat}

% The bibliography should be embedded for final submission.

%\begin{thebibliography}{}
%\softraggedright

%\bibitem[SOME~REF et~al.(2009)Someone, Another]{someone02}
%A. B. Someone, and X. Y. Another. ...reference text...
%\end{thebibliography}

\end{document}