Age | Commit message (Collapse) | Author |
|
We would like to enable the ABI checker as soon as possible so that we
can iterate. The check can be re-enabled when it passes.
FileCheck doesn't allow CHECKs to be commented out so we have to
disrupt them instead.
BUG=https://code.google.com/p/nativeclient/issues/detail?id=2309
BUG=https://code.google.com/p/nativeclient/issues/detail?id=3360
TEST=run ABI checker on NaCl Scons-based tests
Review URL: https://codereview.chromium.org/13375008
|
|
Code improvement suggested by Jakob (in review of r178450). No functionality
change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178473 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Before, the checker failed with a cast error, when trying to cast the
BasicBlock in a BlockAddress to a Constant.
Fix it so that we at least know which global initializer is being rejected.
BUG=https://code.google.com/p/nativeclient/issues/detail?id=2309
TEST=test/NaCl/PNaClABI/types.ll
Review URL: https://codereview.chromium.org/13392004
|
|
This allows the ABI checker passes to be used in the same way as
LLVM's "-verify" pass. It allows the checker to be run between other
passes, and without launching pnacl-abicheck as a separate process (so
without the overhead of reading bitcode into memory again).
Make the ABI checker passes produce fatal errors by default, to match
"-verify". This is overridden for pnacl-abicheck's use.
BUG=https://code.google.com/p/nativeclient/issues/detail?id=2309
TEST=tested with pnacl-ld.py changes to use the ABI checker passes
Review URL: https://codereview.chromium.org/13323006
|
|
The popcntw instruction is available whenever the popcntd instruction is
available, and performs a separate popcnt on the lower and upper 32-bits.
Ignoring the high-order count, this can be used for the 32-bit input case
(saving on the explicit zero extension otherwise required to use popcntd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178470 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by:
Veselov, Yuri <Yuri.Veselov@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178469 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPCISD::STFIWX is really a memory opcode, and so it should come after
FIRST_TARGET_MEMORY_OPCODE, and we should use DAG.getMemIntrinsicNode to create
nodes using it.
No functionality change intended (although there could be optimization benefits
from preserving the MMO information).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178468 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178462 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Reapply r177968:
After commit 178074 we can now have undefined scheduler variants.
Move the CortexA9 resources into the CortexA9 SchedModel namespace. Define
resource mappings under the CortexA9 SchedModel. Define resources and mappings
for the SwiftModel.
Incooperate Andrew's feedback.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178460 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction counts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178459 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178454 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178452 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
been turned off globally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178451 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ImmToIdxMap should be a DenseMap (not a std::map) because there
is no ordering requirement. Also, we don't need a separate list
of instructions for noImmForm in eliminateFrameIndex, because this
list is essentially the complement of the keys in ImmToIdxMap.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178450 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
A vector sext + sitofp is a lot cheaper than 8 scalar conversions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178448 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This instruction is available on modern PPC64 CPUs, and is now used
to improve the SINT_TO_FP lowering (by eliminating the need for the
separate sign extension instruction and decreasing the amount of
needed stack space).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178446 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The existing SINT_TO_FP code for i32 -> float/double conversion was disabled
because it relied on broken EXTSW_32/STD_32 instruction definitions. The
original intent had been to enable these 64-bit instructions to be used on CPUs
that support them even in 32-bit mode. Unfortunately, this form of lying to
the infrastructure was buggy (as explained in the FIXME comment) and had
therefore been disabled.
This re-enables this functionality, using regular DAG nodes, but only when
compiling in 64-bit mode. The old STD_32/EXTSW_32 definitions (which were dead)
are removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178438 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that case.
Fixes the crash reported in PR15608.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178429 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
'@SECREL' is what is used by the Microsoft assembler, but GNU as expects '@SECREL32'.
With the patch, the MC-generated code works fine in combination with a recent GNU as (2.23.51.20120920 here).
Patch by David Nadlinger!
Differential Revision: http://llvm-reviews.chandlerc.com/D429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178427 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178420 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178417 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
specific code paths.
This allows us to write code like:
if (__nvvm_reflect("FOO"))
// Do something
else
// Do something else
and compile into a library, then give "FOO" a value at kernel
compile-time so the check becomes a no-op.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178416 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Hopefully this resolves any outstanding style issues and gives us
an automated way of ensuring we conform to the style guidelines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178415 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
rule 1: (x | c1) ^ c2 => (x & ~c1) ^ (c1^c2),
only useful when c1=c2
rule 2: (x & c1) ^ (x & c2) = (x & (c1^c2))
rule 3: (x | c1) ^ (x | c2) = (x & c3) ^ c3 where c3 = c1 ^ c2
rule 4: (x | c1) ^ (x & c2) => (x & c3) ^ c1, where c3 = ~c1 ^ c2
It reduces an application's size (in terms of # of instructions) by 8.9%.
Reviwed by Pete Cooper. Thanks a lot!
rdar://13212115
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178409 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178408 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178407 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Check that instruction selection can select multiply-add/sub DSP instructions
from a pattern that doesn't have intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178406 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178405 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
derived class MipsSETargetLowering.
We shouldn't be generating madd/msub nodes if target is Mips16, since Mips16
doesn't have support for multipy-add/sub instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178404 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The new instructions have explicit register output operands and use table-gen
patterns instead of C++ code to do instruction selection.
Mips16's instructions are unaffected by this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178403 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178396 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178395 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178394 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
called in several places in ScheduleDAGRRList.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178393 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to handle accumulator registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178392 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
callee-saved scan.
The code makes use of register's scavenger's capability to spill multiple
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178391 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178390 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ExpandTls's use of replaceUsesOfWith() didn't work for PHI nodes
containing the same Constant twice (which needs to work for same or
differing incoming BasicBlocks). The same applies to
ExpandTlsConstantExpr.
I noticed this while implementing ExpandConstantExpr.
Fix this and factor out some common code that all three passes can
use.
BUG=https://code.google.com/p/nativeclient/issues/detail?id=2837
TEST=test/Transforms/NaCl/*.ll
Review URL: https://codereview.chromium.org/13128002
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178386 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This time tested on both OSX and Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178377 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
present in a module.
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178369 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178368 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
die values. A lot of DIEs have 10 attributes in C++ code (example
clang), none had more than 12. Seems like a good default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178366 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
entire original compile unit has been constructed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178365 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Like nearbyint, rint can be implemented on PPC using the frin instruction. The
complication comes from the fact that rint needs to set the FE_INEXACT flag
when the result does not equal the input value (and frin does not do that). As
a result, we use a custom inserter which, after the rounding, compares the
rounded value with the original, and if they differ, explicitly sets the XX bit
in the FPSCR register (which corresponds to FE_INEXACT).
Once LLVM has better modeling of the floating-point environment we should be
able to (often) eliminate this extra complexity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178362 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178359 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178356 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178355 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It was superseded by MachineBlockPlacement and disabled by default since LLVM 3.1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178349 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178346 91177308-0d34-0410-b5e6-96231b3b80d8
|