| Age | Commit message (Collapse) | Author |
|---|
|
The SelectionDAG graph has MVT type labels, not register classes, so
this makes it clearer what is happening.
This notation is also robust against adding more types to the IntRegs
register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177829 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
These spilling functions will eventually make use of the register scavenger,
however, they'll do so by taking advantage of PEI's virtual-register-based
delayed scavenging mechanism. As a result, these function parameters will not
be used, and can be removed.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177827 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The LR register is unconditionally reserved, and its spilling and restoration
is handled by the prologue/epilogue code. As a result, it is never explicitly
spilled by the register allocator.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177823 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch lets the register scavenger make use of multiple spill slots in
order to guarantee that it will be able to provide multiple registers
simultaneously.
To support this, the RS's API has changed slightly: setScavengingFrameIndex /
getScavengingFrameIndex have been replaced by addScavengingFrameIndex /
isScavengingFrameIndex / getScavengingFrameIndices.
In forthcoming commits, the PowerPC backend will use this capability in order
to implement the spilling of condition registers, and some special-purpose
registers, without relying on r0 being reserved. In some cases, spilling these
registers requires two GPRs: one for addressing and one to hold the value being
transferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177774 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
word.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177747 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We currently have a duplicated set of call instruction patterns depending
on the ABI to be followed (Darwin vs. Linux). This is a bit odd; while the
different ABIs will result in different instruction sequences, the actual
instructions themselves ought to be independent of the ABI. And in fact it
turns out that the only nontrivial difference between the two sets of
patterns is that in the PPC64 Linux ABI, the instruction used for indirect
calls is marked to take X11 as extra input register (which is indeed used
only with that ABI to hold an incoming environment pointer for nested
functions). However, this does not need to be hard-coded at the .td
pattern level; instead, the C++ code expanding calls can simply add that
use, just like it adds uses for argument registers anyway.
No change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177735 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Currently, the sub-operand of a memrr address that corresponds to what
hardware considers the base register is called "offreg", while the
sub-operand that corresponds to the offset is called "ptrreg".
To avoid confusion, this patch simply swaps the named of those two
sub-operands and updates all uses. No functional change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177734 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPCTargetLowering::getPreIndexedAddressParts currently provides
the base part of a memory address in the offset result, and the
offset part in the base result. That swap is then undone again
when an MI instruction is generated (in PPCDAGToDAGISel::Select
for loads, and using .md Pat patterns for stores).
This patch reverts this double swap, to make common code and
back-end be in sync as to which part of the address is base
and which is offset.
To avoid performance regressions in certain cases, target code
now checks whether the choice of base register would be rejected
for pre-inc accesses by common code, and attempts to swap base
and offset again in such cases. (Overall, this means that now
pre-ice accesses are generated *more* frequently than before.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177733 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The iaddroff ComplexPattern is supposed to recognize displacement
expressions that have been processed by a SelectAddressRegImm,
which means it needs to accept TargetConstant and TargetGlobalAddress
nodes. Currently, it erroneously also accepts some other nodes,
in particular Constant and PPCISD::Lo.
While this problem is currently latent, it would cause wrong-code
bugs with a follow-on patch I'm about to commit, so this patch
tightens the ComplexPattern. The equivalent change is made in
PPCDAGToDAGISel::Select, where pre-inc load patterns are handled
(as opposed to store patterns, the loads are handled in C++ code
without making use of the .td ComplexPattern).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177732 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The xaddroff pattern is currently (mistakenly) used to recognize
the *base* register in pre-inc store patterns. This patch replaces
those uses by ptr_rc_nor0 (as is elsewhere done to match the base
register of an address), and removes the now unused ComplexPattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177731 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Fixes wrong lighting in some corner cases with r600g and radeonsi, e.g.
manifested by failure of two piglit/glean tests and intermittent black
patches in many apps.
Tested on SI and RS880.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62012 [radeonsi]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58150 [r600g]
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177730 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For mips a branch an 18-bit signed offset (the 16-bit
offset field shifted left 2 bits) is added to the
address of the instruction following the branch
(not the branch itself), in the branch delay slot,
to form a PC-relative effective target address.
Previously, the code generator did not perform the
shift of the immediate branch offset which resulted
in wrong instruction opcode. This patch fixes the issue.
Contributor: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177687 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instructions
This patch uses the generated instruction info tables to
identify memory/load store instructions.
After successful matching and based on the operand type
and size, it generates additional instructions to the output.
Contributor: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177685 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
As Jakob pointed out in his review of r177423, having a shared ZERO
register between the 32- and 64-bit register classes causes this
odd G8RC_NOX0_and_GPRC_NOR0 class to be created. As recommended,
this adds a ZERO8 register which differentiates the 32- and 64-bit
zeros.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177683 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Jakob for isolating the underlying problem from the
test case in r177423. The original commit had introduced
asymmetric copy operations, but these turned out to be a work-around
to the real problem (the use of == instead of hasSubClassEq in PPCCTRLoops).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177679 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The .set directive in the Mips the assembler can be
used to set the value of a symbol to an expression.
This changes the symbol's value and type to conform
to the expression's.
Syntax: .set symbol, expression
This patch implements the parsing of the above syntax
and enables the parser to use defined symbols when
parsing operands.
Contributor: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177667 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This implements SJLJ lowering on PPC, making the Clang functions
__builtin_{setjmp/longjmp} functional on PPC platforms. The implementation
strategy is similar to that on X86, with the exception that a branch-and-link
variant is used to get the right jump address. Credit goes to Bill Schmidt for
suggesting the use of the unconditional bcl form (instead of the regular bl
instruction) to limit return-address-cache pollution.
Benchmarking the speed at -O3 of:
static jmp_buf env_sigill;
void foo() {
__builtin_longjmp(env_sigill,1);
}
main() {
...
for (int i = 0; i < c; ++i) {
if (__builtin_setjmp(env_sigill)) {
goto done;
} else {
foo();
}
done:;
}
...
}
vs. the same code using the libc setjmp/longjmp functions on a P7 shows that
this builtin implementation is ~4x faster with Altivec enabled and ~7.25x
faster with Altivec disabled. This comparison is somewhat unfair because the
libc version must also save/restore the VSX registers which we don't yet
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177666 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Although there is only one Altivec VRSAVE register, it is a member of
a register class, and we need the ability to spill it. Because this
register is normally callee-preserved and handled by special code this
has never before been necessary. However, this capability will be required by
a forthcoming commit adding SjLj support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177654 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The old code used to lower FRAMEADDR tried to replicate the logic in the real
frame-lowering code that determines whether or not the frame pointer (r31) will
be used. When it seemed as through the frame pointer would not be used, the
stack pointer (r1) was used instead. Unfortunately, because the stack size is
not yet known, this does not work. Instead, this change introduces new
always-reserved pseudo-registers (FP and FP8) that are replaced during prologue
insertion with the real frame-pointer register (either r1 or r31).
It is important that this intrinsic always return a valid frame address because
it is used by Clang to store the frame address as part of code generation for
__builtin_setjmp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177653 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
NEON is not IEEE 754 compliant, so we should avoid lowering single-precision
floating point operations with NEON unless unsafe-math is turned on. The
equivalent VFP instructions are IEEE 754 compliant, but in some cores they're
much slower, so some archs/OSs might still request it to be on by default,
such as Swift and Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177651 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177611 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It's not yet clear if these instructions need a more careful model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177599 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is used for all the expensive system instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177598 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177592 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177591 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
be kept to pass regression tests.
|
|
Merge Nacl-LLVM work since the upstream merge branched
|
|
- After moving logic recognizing vector shift with scalar amount from
DAG combining into DAG lowering, we declare to customize all vector
shifts even vector shift on AVX is legal. As a result, the cost model
needs special tuning to identify these legal cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177586 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177540 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177539 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Move SRA/SRL/SHL lowering support from DAG combination to DAG lowering
to support extended 256-bit integer in AVX but not AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177478 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Prepare moving logic from DAG combining into DAG lowering. There's no
functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177477 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- no functionality change
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177476 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Stepan Dyatkovskiy <stpworld@narod.ru>
rdar://13457826
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177463 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177461 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177460 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177459 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
logic as a QOI cleanup. No functional change. Tests already in place.
rdar://13456414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177446 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Add a new WriteZero SchedWrite type for the common dependency-breaking
instructions that clear a register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
an X86Operand, but also performs a Sema lookup and adds the sizing directive
when appropriate. Use this when parsing a bracketed statement. This is
necessary to get the instruction matching correct as well. Test case coming
on clang side.
rdar://13455408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177439 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
All pre-increment load patterns need to set the mayLoad flag (since
they don't provide a DAG pattern).
This was missing for LHAUX8 and LWAUX, which is added by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177431 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
As opposed to to pre-increment store patterns, the pre-increment
load patterns were already using standard memory operands, with
the sole exception of LHAU8.
As there's no real reason why LHAU8 should be different here,
this patch simply rewrites the pattern to also use a memri
operand, just like all the other patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177430 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Currently, pre-increment store patterns are written to use two separate
operands to represent address base and displacement:
stwu $rS, $ptroff($ptrreg)
This causes problems when implementing the assembler parser, so this
commit changes the patterns to use standard (complex) memory operands
like in all other memory access instruction patterns:
stwu $rS, $dst
To still match those instructions against the appropriate pre_store
SelectionDAG nodes, the patch uses the new feature that allows a Pat
to match multiple DAG operands against a single (complex) instruction
operand.
Approved by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177429 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The tocentry operand class refers to 64-bit values (it is only used in 64-bit,
where iPTR is a 64-bit type), but its sole suboperand is designated as 32-bit
type. This causes a mismatch to be detected at compile-time with the TableGen
patch I'll check in shortly.
To fix this, this commit changes the suboperand to a 64-bit type as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177427 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
def : Pat<(load (i64 (X86Wrapper tglobaltlsaddr :$dst))),
(MOV64rm tglobaltlsaddr :$dst)>;
This pattern is invalid because the MOV64rm instruction expects a
source operand of type "i64mem", which is a subclass of X86MemOperand
and thus actually consists of five MI operands, but the Pat provides
only a single MI operand ("tglobaltlsaddr" matches an SDnode of
type ISD::TargetGlobalTLSAddress and provides a single output).
Thus, if the pattern were ever matched, subsequent uses of the MOV64rm
instruction pattern would access uninitialized memory. In addition,
with the TableGen patch I'm about to check in, this would actually be
reported as a build-time error.
Fortunately, the pattern does in fact never match, for at least two
independent reasons.
First, the code generator actually never generates a pattern of the
form (load (X86Wrapper (tglobaltlsaddr))). For most combinations of
TLS and code models, (tglobaltlsaddr) represents just an offset that
needs to be added to some base register, so it is never directly
dereferenced. The only exception is the initial-exec model, where
(tglobaltlsaddr) refers to the (pc-relative) address of a GOT slot,
which *is* in fact directly dereferenced: but in that case, the
X86WrapperRIP node is used, not X86Wrapper, so the Pat doesn't match.
Second, even if some patterns along those lines *were* ever generated,
we should not need an extra Pat pattern to match it. Instead, the
original MOV64rm instruction pattern ought to match directly, since
it uses an "addr" operand, which is implemented via the SelectAddr
C++ routine; this routine is supposed to accept the full range of
input DAGs that may be implemented by a single mov instruction,
including those cases involving ISD::TargetGlobalTLSAddress (and
actually does so e.g. in the initial-exec case as above).
To avoid build breaks (due to the above-mentioned error) after the
TableGen patch is checked in, I'm removing this Pat here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177426 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Currently the PPC r0 register is unconditionally reserved. There are two reasons
for this:
1. r0 is treated specially (as the constant 0) by certain instructions, and so
cannot be used with those instructions as a regular register.
2. r0 is used as a temporary register in the CR-register spilling process
(where, under some circumstances, we require two GPRs).
This change addresses the first reason by introducing a restricted register
class (without r0) for use by those instructions that treat r0 specially. These
register classes have a new pseudo-register, ZERO, which represents the r0-as-0
use. This has the side benefit of making the existing target code simpler (and
easier to understand), and will make it clear to the register allocator that
uses of r0 as 0 don't conflict will real uses of the r0 register.
Once the CR spilling code is improved, we'll be able to allocate r0.
Adding these extra register classes, for some reason unclear to me, causes
requests to the target to copy 32-bit registers to 64-bit registers. The
resulting code seems correct (and causes no test-suite failures), and the new
test case covers this new kind of asymmetric copy.
As r0 is still reserved, no functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177423 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Ahmad, Muhammad T <muhammad.t.ahmad@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177421 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177418 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177417 91177308-0d34-0410-b5e6-96231b3b80d8
|
