| Age | Commit message (Collapse) | Author |
|---|
|
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180131 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
VSETCC without first checking the target's vector boolean contents.
This exposed an issue with PowerPC AltiVec where it appears it was setting the wrong vector boolean contents. The included change
fixes the PowerPC tests, and was OK'd by Hal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180129 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
First, we should not cheat: fsel-based lowering of select_cc is a
finite-math-only optimization (the ISA manual, section F.3 of v2.06, makes
this clear, as does a note in our own README).
This also adds fsel-based lowering of EQ and NE condition codes. As it turned
out, fsel generation was covered by a grand total of zero regression test
cases. I've added some test cases to cover the existing behavior (which is now
finite-math only), as well as the new EQ cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179000 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
On cores for which we know the misprediction penalty, and we have
the isel instruction, we can profitably perform early if conversion.
This enables us to replace some small branch sequences with selects
and avoid the potential stalls from mispredicting the branches.
Enabling this feature required implementing canInsertSelect and
insertSelect in PPCInstrInfo; isel code in PPCISelLowering was
refactored to use these functions as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178926 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
BCL is normally a conditional branch-and-link instruction, but has
an unconditional form (which is used in the SjLj code, for example).
To make clear that this BCL instruction definition is specifically
the special unconditional form (which does not meaningfully take
a condition-register input), rename it to BCLalways.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178803 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The DAGCombine logic that recognized a/sqrt(b) and transformed it into
a multiplication by the reciprocal sqrt did not handle cases where the
sqrt and the division were separated by an fpext or fptrunc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178801 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Incorporating review feedback from Bill Schmidt on r178617. No functionality
change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178672 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For this we need to use a libcall. Previously LLVM didn't implement
libcall support for frem, so I've added it in the usual
straightforward manner. A test case from the bug report is included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178639 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When unsafe FP math operations are enabled, we can use the fre[s] and
frsqrte[s] instructions, which generate reciprocal (sqrt) estimates, together
with some Newton iteration, in order to quickly generate floating-point
division and sqrt results. All of these instructions are separately optional,
and so each has its own feature flag (except for the Altivec instructions,
which are covered under the existing Altivec flag). Doing this is not only
faster than using the IEEE-compliant fdiv/fsqrt instructions, but allows these
computations to be pipelined with other computations in order to hide their
overall latency.
I've also added a couple of missing fnmsub patterns which turned out to be
missing (but are necessary for good code generation of the Newton iterations).
Altivec needs a similar fix, but that will probably be more complicated because
fneg is expanded for Altivec's v4f32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178617 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When doing a partword atomic operation, a lwarx was being paired with
a stdcx. instead of a stwcx. when compiling for a 64-bit target. The
target has nothing to do with it in this case; we always need a stwcx.
Thanks to Kai Nacke for reporting the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178559 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Bill Schmidt for finding this in review of r178480.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178521 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178489 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The P7 and A2 have additional floating-point conversion instructions which
allow a direct two-instruction sequence (plus load/store) to convert from all
combinations (signed/unsigned i32/i64) <--> (float/double) (on previous cores,
only some combinations were directly available).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178480 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The popcntw instruction is available whenever the popcntd instruction is
available, and performs a separate popcnt on the lower and upper 32-bits.
Ignoring the high-order count, this can be used for the 32-bit input case
(saving on the explicit zero extension otherwise required to use popcntd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178470 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPCISD::STFIWX is really a memory opcode, and so it should come after
FIRST_TARGET_MEMORY_OPCODE, and we should use DAG.getMemIntrinsicNode to create
nodes using it.
No functionality change intended (although there could be optimization benefits
from preserving the MMO information).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178468 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This instruction is available on modern PPC64 CPUs, and is now used
to improve the SINT_TO_FP lowering (by eliminating the need for the
separate sign extension instruction and decreasing the amount of
needed stack space).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178446 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The existing SINT_TO_FP code for i32 -> float/double conversion was disabled
because it relied on broken EXTSW_32/STD_32 instruction definitions. The
original intent had been to enable these 64-bit instructions to be used on CPUs
that support them even in 32-bit mode. Unfortunately, this form of lying to
the infrastructure was buggy (as explained in the FIXME comment) and had
therefore been disabled.
This re-enables this functionality, using regular DAG nodes, but only when
compiling in 64-bit mode. The old STD_32/EXTSW_32 definitions (which were dead)
are removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178438 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Like nearbyint, rint can be implemented on PPC using the frin instruction. The
complication comes from the fact that rint needs to set the FE_INEXACT flag
when the result does not equal the input value (and frin does not do that). As
a result, we use a custom inserter which, after the rounding, compares the
rounded value with the original, and if they differ, explicitly sets the XX bit
in the FPSCR register (which corresponds to FE_INEXACT).
Once LLVM has better modeling of the floating-point environment we should be
able to (often) eliminate this extra complexity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178362 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It was superseded by MachineBlockPlacement and disabled by default since LLVM 3.1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178349 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
These instructions are available on the P5x (and later) and on the A2. They
implement the standard floating-point rounding operations (floor, trunc, etc.).
One caveat: frin (round to nearest) does not implement "ties to even", and so
is only enabled in fast-math mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178337 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Compiling in 32-bit mode on a P7 would assert after 64-bit DAG combines were
added for bswap with load/store. This is because these combines are really only
valid in 64-bit mode, regardless of the CPU (and this was not being checked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178286 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Bill Schmidt for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178280 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178276 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178233 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Bill Schmidt for pointing this out during code review!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178170 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
As part of the the sequence generated to implement long double -> int
conversions, we need to perform an FADD in round-to-zero mode. This is
problematical since the FPSCR is not at all modeled at the SelectionDAG
level, and thus there is a risk of getting floating point instructions
generated out of sequence with the instructions to modify FPSCR.
The current code handles this by somewhat "special" patterns that in part
have dummy operands, and/or duplicate existing instructions, making them
awkward to handle in the asm parser.
This commit changes this by leaving the "FADD in round-to-zero mode"
as an atomic operation on the SelectionDAG level, and only split it up into
real instructions at the MI level (via custom inserter). Since at *this*
level the FPSCR *is* modeled (via the "RM" hard register), much of the
"special" stuff can just go away, and the resulting patterns can be used by
the asm parser.
No significant change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178006 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This commit changes the ISEL patterns to use a CCBITRC operand
instead of a "pred" operand. This matches the actual instruction
text more directly, and simplifies use of ISEL with the asm parser.
In addition, this change allows some simplification of handling
the "pred" operand, as this is now only used by BCC.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178003 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We currently have a duplicated set of call instruction patterns depending
on the ABI to be followed (Darwin vs. Linux). This is a bit odd; while the
different ABIs will result in different instruction sequences, the actual
instructions themselves ought to be independent of the ABI. And in fact it
turns out that the only nontrivial difference between the two sets of
patterns is that in the PPC64 Linux ABI, the instruction used for indirect
calls is marked to take X11 as extra input register (which is indeed used
only with that ABI to hold an incoming environment pointer for nested
functions). However, this does not need to be hard-coded at the .td
pattern level; instead, the C++ code expanding calls can simply add that
use, just like it adds uses for argument registers anyway.
No change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177735 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPCTargetLowering::getPreIndexedAddressParts currently provides
the base part of a memory address in the offset result, and the
offset part in the base result. That swap is then undone again
when an MI instruction is generated (in PPCDAGToDAGISel::Select
for loads, and using .md Pat patterns for stores).
This patch reverts this double swap, to make common code and
back-end be in sync as to which part of the address is base
and which is offset.
To avoid performance regressions in certain cases, target code
now checks whether the choice of base register would be rejected
for pre-inc accesses by common code, and attempts to swap base
and offset again in such cases. (Overall, this means that now
pre-ice accesses are generated *more* frequently than before.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177733 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
As Jakob pointed out in his review of r177423, having a shared ZERO
register between the 32- and 64-bit register classes causes this
odd G8RC_NOX0_and_GPRC_NOR0 class to be created. As recommended,
this adds a ZERO8 register which differentiates the 32- and 64-bit
zeros.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177683 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This implements SJLJ lowering on PPC, making the Clang functions
__builtin_{setjmp/longjmp} functional on PPC platforms. The implementation
strategy is similar to that on X86, with the exception that a branch-and-link
variant is used to get the right jump address. Credit goes to Bill Schmidt for
suggesting the use of the unconditional bcl form (instead of the regular bl
instruction) to limit return-address-cache pollution.
Benchmarking the speed at -O3 of:
static jmp_buf env_sigill;
void foo() {
__builtin_longjmp(env_sigill,1);
}
main() {
...
for (int i = 0; i < c; ++i) {
if (__builtin_setjmp(env_sigill)) {
goto done;
} else {
foo();
}
done:;
}
...
}
vs. the same code using the libc setjmp/longjmp functions on a P7 shows that
this builtin implementation is ~4x faster with Altivec enabled and ~7.25x
faster with Altivec disabled. This comparison is somewhat unfair because the
libc version must also save/restore the VSX registers which we don't yet
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177666 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The old code used to lower FRAMEADDR tried to replicate the logic in the real
frame-lowering code that determines whether or not the frame pointer (r31) will
be used. When it seemed as through the frame pointer would not be used, the
stack pointer (r1) was used instead. Unfortunately, because the stack size is
not yet known, this does not work. Instead, this change introduces new
always-reserved pseudo-registers (FP and FP8) that are replaced during prologue
insertion with the real frame-pointer register (either r1 or r31).
It is important that this intrinsic always return a valid frame address because
it is used by Clang to store the frame address as part of code generation for
__builtin_setjmp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177653 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Currently the PPC r0 register is unconditionally reserved. There are two reasons
for this:
1. r0 is treated specially (as the constant 0) by certain instructions, and so
cannot be used with those instructions as a regular register.
2. r0 is used as a temporary register in the CR-register spilling process
(where, under some circumstances, we require two GPRs).
This change addresses the first reason by introducing a restricted register
class (without r0) for use by those instructions that treat r0 specially. These
register classes have a new pseudo-register, ZERO, which represents the r0-as-0
use. This has the side benefit of making the existing target code simpler (and
easier to understand), and will make it clear to the register allocator that
uses of r0 as 0 don't conflict will real uses of the r0 register.
Once the CR spilling code is improved, we'll be able to allocate r0.
Adding these extra register classes, for some reason unclear to me, causes
requests to the target to copy 32-bit registers to 64-bit registers. The
resulting code seems correct (and causes no test-suite failures), and the new
test case covers this new kind of asymmetric copy.
As r0 is still reserved, no functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177423 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PPC64 supports unaligned loads and stores of 64-bit values, but
in order to use the r+i forms, the offset must be a multiple of 4.
Unfortunately, this cannot always be determined by examining the
immediate itself because it might be available only via a TOC entry.
In order to get around this issue, we additionally predicate the
selection of the r+i form on the alignment of the load or store
(forcing it to be at least 4 in order to select the r+i form).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177338 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Unaligned access is supported on PPC for non-vector types, and is generally
more efficient than manually expanding the loads and stores.
A few of the existing test cases were using expanded unaligned loads and stores
to test other features (like load/store with update), and for these test cases,
unaligned access remains disabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177160 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176648 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.
There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.
The refactoring was OK'd by Anton Korobeynikov on llvmdev.
Note: this touches the target interfaces, so out-of-tree targets may
be affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175788 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
http://llvm.org/docs/CodingStandards.html#name-types-functions-variables-and-enumerators-properly
ivars should be camel-case and start with an upper-case letter. A few in
TargetLowering were starting with a lower-case letter.
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175667 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This handles the cases where the 6-bit splat element is odd, converting
to a three-instruction sequence to add or subtract two splats. With this
fix, the XFAIL in test/CodeGen/PowerPC/vec_constants.ll is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175663 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The PPC backend doesn't handle these correctly. This patch uses logic
similar to that in the X86 and ARM backends to track these arguments
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175635 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
During lowering of a BUILD_VECTOR, we look for opportunities to use a
vector splat. When the splatted value fits in 5 signed bits, a single
splat does the job. When it doesn't fit in 5 bits but does fit in 6,
and is an even value, we can splat on half the value and add the result
to itself.
This last optimization hasn't been working recently because of improved
constant folding. To circumvent this, create a pseudo VADD_SPLAT that
can be expanded during instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175632 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Most of PPCCallingConv.td is used only by the 32-bit SVR4 ABI. Rename
things to clarify this. Also delete some code that's been commented out
for a long time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174526 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174409 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
I didn't see those because the test case used "not grep". FileCheck the test and
XFAIL it, preserving the old optimization, so this can be fixed eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174330 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173755 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
directly.
This is in preparation for removing the use of the 'Attribute' class as a
collection of attributes. That will shift to the AttributeSet class instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171253 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Use of store or load with the atomic specifier on 64-bit types would
cause instruction-selection failures. As with the 32-bit case, these
can use the default expansion in terms of cmp-and-swap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171072 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170551 91177308-0d34-0410-b5e6-96231b3b80d8
|
