Age | Commit message (Collapse) | Author |
|
(gcc-4.6 warns about these).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117021 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
exposes an initializeMyPassFunction(), which
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116820 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
perform initialization without static constructors AND without explicit initialization
by the client. For the moment, passes are required to initialize both their
(potential) dependencies and any passes they preserve. I hope to be able to relax
the latter requirement in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116334 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115996 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
passes over to the new registration API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111815 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
If we are emitting COPY instructions for the REG_SEQUENCE, make sure the kill
flag goes on the last COPY. Otherwise we may be using a killed register.
<rdar://problem/8287792>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110589 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110460 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110410 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
address of the static
ID member as the sole unique type identifier. Clean up APIs related to this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110396 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
TII::isMoveInstr is going tobe completely removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108507 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108062 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This also avoids fatal copies from physregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108061 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ScheduleDAGEmit, TwoAddressLowering, and PHIElimination.
This switches the bulk of register copies to using COPY, but many less used
copyRegToReg calls remain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108050 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107879 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Fix X86InstrInfo::convertToThreeAddressWithLEA to generate COPY instead of
INSERT_SUBREG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107878 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Buildbot breakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107744 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107732 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
INSERT_SUBREG will now only appear in SSA machine instructions.
Fix the handling of partial redefs in ProcessImplicitDefs. This is now relevant
since partial redef COPY instructions appear.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107726 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This code is transitional, it will soon be possible to eliminate
isExtractSubreg, isInsertSubreg, and isMoveInstr in most places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107547 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- X86 unfolding should check if the instructions being unfolded has memoperands.
If there is no memoperands, then it must assume conservative alignment. If this
would introduce an expensive sse unaligned load / store, then unfoldMemoryOperand
etc. should not unfold the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107509 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
kill and dead flags will end up on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106520 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in addition to the kill flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106512 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
opportunities. For example, this lets it emit this:
movq (%rax), %rcx
addq %rdx, %rcx
instead of this:
movq %rdx, %rcx
addq (%rax), %rcx
in the case where %rdx has subsequent uses. It's the same number
of instructions, and usually the same encoding size on x86, but
it appears faster, and in general, it may allow better scheduling
for the load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106493 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the inserted INSERT_SUBREGs after us.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106345 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
combined to an insert_subreg, i.e., where the destination register is larger
than the source. We need to check that the subregs can be composed for that
case in a symmetrical way to the case when the destination is smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106004 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
replacing the overly conservative checks that I had introduced recently to
deal with correctness issues. This makes a pretty noticable difference
in our testcases where reg_sequences are used. I've updated one test to
check that we no longer emit the unnecessary subreg moves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105991 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
will use this to try to avoid breaking up IT blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105745 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that it is an immediate before checking that the instruction is an
EXTRACT_SUBREG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105585 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Check that all the instructions are in the same basic block, that the
EXTRACT_SUBREGs write to the same subregs that are being extracted, and that
the source and destination registers are in the same regclass. Some of
these constraints can be relaxed with a bit more work. Jakob suggested
that the loop that checks for subregs when NewSubIdx != 0 should use the
"nodbg" iterator, so I made that change here, too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105437 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction defines subregisters.
Any existing subreg indices on the original instruction are preserved or
composed with the new subreg index.
Also substitute multiple operands mentioning the original register by using the
new MachineInstr::substituteRegister() function. This is necessary because there
will soon be <imp-def> operands added to non read-modify-write partial
definitions. This instruction:
%reg1234:foo = FLAP %reg1234<imp-def>
will reMaterialize(%reg3333, bar) like this:
%reg3333:bar-foo = FLAP %reg333:bar<imp-def>
Finally, replace the TargetRegisterInfo pointer argument with a reference to
indicate that it cannot be NULL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105358 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and tidy up the comment describing it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105339 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
checked and it is safe to proceed with the changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105304 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105066 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that are aliases of the specified register.
- Rename modifiesRegister to definesRegister since it's looking a def of the
specific register or one of its super-registers. It's not looking for def of a
sub-register or alias that could change the specified register.
- Added modifiesRegister to look for defs of aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104377 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
lowering REG_SEQUENCE instructions.
Insert copies for REG_SEQUENCE sources not killed to avoid breaking later passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104146 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
REG_SEQUENCE instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103994 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
it with an IMPLICIT_DEF rather than deleting it or else it would be left without a def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103984 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103971 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instructions.
e.g.
%reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
%reg1027<def> = EXTRACT_SUBREG %reg1026, 6
%reg1028<def> = EXTRACT_SUBREG %reg1026<kill>, 5
...
%reg1029<def> = REG_SEQUENCE %reg1028<kill>, 5, %reg1027<kill>, 6, %reg1028, 7, %reg1027, 8, %reg1028, 9, %reg1027, 10, %reg1030<kill>, 11, %reg1032<kill>, 12
After REG_SEQUENCE is eliminated, we are left with:
%reg1026<def> = VLDMQ %reg1025<kill>, 260, pred:14, pred:%reg0
%reg1029:6<def> = EXTRACT_SUBREG %reg1026, 6
%reg1029:5<def> = EXTRACT_SUBREG %reg1026<kill>, 5
The regular coalescer will not be able to coalesce reg1026 and reg1029 because it doesn't
know how to combine sub-register indices 5 and 6. Now 2-address pass will consult the
target whether sub-registers 5 and 6 of reg1026 can be combined to into a larger
sub-register (or combined to be reg1026 itself as is the case here). If it is possible,
it will be able to replace references of reg1026 with reg1029 + the larger sub-register
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103835 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
information when a copy is introduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103680 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103538 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103449 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103435 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
doesn't have to guess.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103194 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103109 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99321 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97663 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97578 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95889 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95814 91177308-0d34-0410-b5e6-96231b3b80d8
|