========================= Clang Language Extensions ========================= .. contents:: :local: :depth: 1 .. toctree:: :hidden: ObjectiveCLiterals BlockLanguageSpec Block-ABI-Apple AutomaticReferenceCounting Introduction ============ This document describes the language extensions provided by Clang. In addition to the language extensions listed here, Clang aims to support a broad range of GCC extensions. Please see the `GCC manual `_ for more information on these extensions. .. _langext-feature_check: Feature Checking Macros ======================= Language extensions can be very useful, but only if you know you can depend on them. In order to allow fine-grain features checks, we support three builtin function-like macros. This allows you to directly test for a feature in your code without having to resort to something like autoconf or fragile "compiler version checks". ``__has_builtin`` ----------------- This function-like macro takes a single identifier argument that is the name of a builtin function. It evaluates to 1 if the builtin is supported or 0 if not. It can be used like this: .. code-block:: c++ #ifndef __has_builtin // Optional of course. #define __has_builtin(x) 0 // Compatibility with non-clang compilers. #endif ... #if __has_builtin(__builtin_trap) __builtin_trap(); #else abort(); #endif ... .. _langext-__has_feature-__has_extension: ``__has_feature`` and ``__has_extension`` ----------------------------------------- These function-like macros take a single identifier argument that is the name of a feature. ``__has_feature`` evaluates to 1 if the feature is both supported by Clang and standardized in the current language standard or 0 if not (but see :ref:`below `), while ``__has_extension`` evaluates to 1 if the feature is supported by Clang in the current language (either as a language extension or a standard language feature) or 0 if not. They can be used like this: .. code-block:: c++ #ifndef __has_feature // Optional of course. #define __has_feature(x) 0 // Compatibility with non-clang compilers. #endif #ifndef __has_extension #define __has_extension __has_feature // Compatibility with pre-3.0 compilers. #endif ... #if __has_feature(cxx_rvalue_references) // This code will only be compiled with the -std=c++11 and -std=gnu++11 // options, because rvalue references are only standardized in C++11. #endif #if __has_extension(cxx_rvalue_references) // This code will be compiled with the -std=c++11, -std=gnu++11, -std=c++98 // and -std=gnu++98 options, because rvalue references are supported as a // language extension in C++98. #endif .. _langext-has-feature-back-compat: For backwards compatibility reasons, ``__has_feature`` can also be used to test for support for non-standardized features, i.e. features not prefixed ``c_``, ``cxx_`` or ``objc_``. Another use of ``__has_feature`` is to check for compiler features not related to the language standard, such as e.g. :doc:`AddressSanitizer `. If the ``-pedantic-errors`` option is given, ``__has_extension`` is equivalent to ``__has_feature``. The feature tag is described along with the language feature below. The feature name or extension name can also be specified with a preceding and following ``__`` (double underscore) to avoid interference from a macro with the same name. For instance, ``__cxx_rvalue_references__`` can be used instead of ``cxx_rvalue_references``. ``__has_attribute`` ------------------- This function-like macro takes a single identifier argument that is the name of an attribute. It evaluates to 1 if the attribute is supported or 0 if not. It can be used like this: .. code-block:: c++ #ifndef __has_attribute // Optional of course. #define __has_attribute(x) 0 // Compatibility with non-clang compilers. #endif ... #if __has_attribute(always_inline) #define ALWAYS_INLINE __attribute__((always_inline)) #else #define ALWAYS_INLINE #endif ... The attribute name can also be specified with a preceding and following ``__`` (double underscore) to avoid interference from a macro with the same name. For instance, ``__always_inline__`` can be used instead of ``always_inline``. Include File Checking Macros ============================ Not all developments systems have the same include files. The :ref:`langext-__has_include` and :ref:`langext-__has_include_next` macros allow you to check for the existence of an include file before doing a possibly failing ``#include`` directive. Include file checking macros must be used as expressions in ``#if`` or ``#elif`` preprocessing directives. .. _langext-__has_include: ``__has_include`` ----------------- This function-like macro takes a single file name string argument that is the name of an include file. It evaluates to 1 if the file can be found using the include paths, or 0 otherwise: .. code-block:: c++ // Note the two possible file name string formats. #if __has_include("myinclude.h") && __has_include() # include "myinclude.h" #endif // To avoid problem with non-clang compilers not having this macro. #if defined(__has_include) && __has_include("myinclude.h") # include "myinclude.h" #endif To test for this feature, use ``#if defined(__has_include)``. .. _langext-__has_include_next: ``__has_include_next`` ---------------------- This function-like macro takes a single file name string argument that is the name of an include file. It is like ``__has_include`` except that it looks for the second instance of the given file found in the include paths. It evaluates to 1 if the second instance of the file can be found using the include paths, or 0 otherwise: .. code-block:: c++ // Note the two possible file name string formats. #if __has_include_next("myinclude.h") && __has_include_next() # include_next "myinclude.h" #endif // To avoid problem with non-clang compilers not having this macro. #if defined(__has_include_next) && __has_include_next("myinclude.h") # include_next "myinclude.h" #endif Note that ``__has_include_next``, like the GNU extension ``#include_next`` directive, is intended for use in headers only, and will issue a warning if used in the top-level compilation file. A warning will also be issued if an absolute path is used in the file argument. ``__has_warning`` ----------------- This function-like macro takes a string literal that represents a command line option for a warning and returns true if that is a valid warning option. .. code-block:: c++ #if __has_warning("-Wformat") ... #endif Builtin Macros ============== ``__BASE_FILE__`` Defined to a string that contains the name of the main input file passed to Clang. ``__COUNTER__`` Defined to an integer value that starts at zero and is incremented each time the ``__COUNTER__`` macro is expanded. ``__INCLUDE_LEVEL__`` Defined to an integral value that is the include depth of the file currently being translated. For the main file, this value is zero. ``__TIMESTAMP__`` Defined to the date and time of the last modification of the current source file. ``__clang__`` Defined when compiling with Clang ``__clang_major__`` Defined to the major marketing version number of Clang (e.g., the 2 in 2.0.1). Note that marketing version numbers should not be used to check for language features, as different vendors use different numbering schemes. Instead, use the :ref:`langext-feature_check`. ``__clang_minor__`` Defined to the minor version number of Clang (e.g., the 0 in 2.0.1). Note that marketing version numbers should not be used to check for language features, as different vendors use different numbering schemes. Instead, use the :ref:`langext-feature_check`. ``__clang_patchlevel__`` Defined to the marketing patch level of Clang (e.g., the 1 in 2.0.1). ``__clang_version__`` Defined to a string that captures the Clang marketing version, including the Subversion tag or revision number, e.g., "``1.5 (trunk 102332)``". .. _langext-vectors: Vectors and Extended Vectors ============================ Supports the GCC, OpenCL, AltiVec and NEON vector extensions. OpenCL vector types are created using ``ext_vector_type`` attribute. It support for ``V.xyzw`` syntax and other tidbits as seen in OpenCL. An example is: .. code-block:: c++ typedef float float4 __attribute__((ext_vector_type(4))); typedef float float2 __attribute__((ext_vector_type(2))); float4 foo(float2 a, float2 b) { float4 c; c.xz = a; c.yw = b; return c; } Query for this feature with ``__has_extension(attribute_ext_vector_type)``. Giving ``-faltivec`` option to clang enables support for AltiVec vector syntax and functions. For example: .. code-block:: c++ vector float foo(vector int a) { vector int b; b = vec_add(a, a) + a; return (vector float)b; } NEON vector types are created using ``neon_vector_type`` and ``neon_polyvector_type`` attributes. For example: .. code-block:: c++ typedef __attribute__((neon_vector_type(8))) int8_t int8x8_t; typedef __attribute__((neon_polyvector_type(16))) poly8_t poly8x16_t; int8x8_t foo(int8x8_t a) { int8x8_t v; v = a; return v; } Vector Literals --------------- Vector literals can be used to create vectors from a set of scalars, or vectors. Either parentheses or braces form can be used. In the parentheses form the number of literal values specified must be one, i.e. referring to a scalar value, or must match the size of the vector type being created. If a single scalar literal value is specified, the scalar literal value will be replicated to all the components of the vector type. In the brackets form any number of literals can be specified. For example: .. code-block:: c++ typedef int v4si __attribute__((__vector_size__(16))); typedef float float4 __attribute__((ext_vector_type(4))); typedef float float2 __attribute__((ext_vector_type(2))); v4si vsi = (v4si){1, 2, 3, 4}; float4 vf = (float4)(1.0f, 2.0f, 3.0f, 4.0f); vector int vi1 = (vector int)(1); // vi1 will be (1, 1, 1, 1). vector int vi2 = (vector int){1}; // vi2 will be (1, 0, 0, 0). vector int vi3 = (vector int)(1, 2); // error vector int vi4 = (vector int){1, 2}; // vi4 will be (1, 2, 0, 0). vector int vi5 = (vector int)(1, 2, 3, 4); float4 vf = (float4)((float2)(1.0f, 2.0f), (float2)(3.0f, 4.0f)); Vector Operations ----------------- The table below shows the support for each operation by vector extension. A dash indicates that an operation is not accepted according to a corresponding specification. ============================== ====== ======= === ==== Opeator OpenCL AltiVec GCC NEON ============================== ====== ======= === ==== [] yes yes yes -- unary operators +, -- yes yes yes -- ++, -- -- yes yes yes -- +,--,*,/,% yes yes yes -- bitwise operators &,|,^,~ yes yes yes -- >>,<< yes yes yes -- !, &&, || no -- -- -- ==, !=, >, <, >=, <= yes yes -- -- = yes yes yes yes :? yes -- -- -- sizeof yes yes yes yes ============================== ====== ======= === ==== See also :ref:`langext-__builtin_shufflevector`. Messages on ``deprecated`` and ``unavailable`` Attributes ========================================================= An optional string message can be added to the ``deprecated`` and ``unavailable`` attributes. For example: .. code-block:: c++ void explode(void) __attribute__((deprecated("extremely unsafe, use 'combust' instead!!!"))); If the deprecated or unavailable declaration is used, the message will be incorporated into the appropriate diagnostic: .. code-block:: c++ harmless.c:4:3: warning: 'explode' is deprecated: extremely unsafe, use 'combust' instead!!! [-Wdeprecated-declarations] explode(); ^ Query for this feature with ``__has_extension(attribute_deprecated_with_message)`` and ``__has_extension(attribute_unavailable_with_message)``. Attributes on Enumerators ========================= Clang allows attributes to be written on individual enumerators. This allows enumerators to be deprecated, made unavailable, etc. The attribute must appear after the enumerator name and before any initializer, like so: .. code-block:: c++ enum OperationMode { OM_Invalid, OM_Normal, OM_Terrified __attribute__((deprecated)), OM_AbortOnError __attribute__((deprecated)) = 4 }; Attributes on the ``enum`` declaration do not apply to individual enumerators. Query for this feature with ``__has_extension(enumerator_attributes)``. 'User-Specified' System Frameworks ================================== Clang provides a mechanism by which frameworks can be built in such a way that they will always be treated as being "system frameworks", even if they are not present in a system framework directory. This can be useful to system framework developers who want to be able to test building other applications with development builds of their framework, including the manner in which the compiler changes warning behavior for system headers. Framework developers can opt-in to this mechanism by creating a "``.system_framework``" file at the top-level of their framework. That is, the framework should have contents like: .. code-block:: none .../TestFramework.framework .../TestFramework.framework/.system_framework .../TestFramework.framework/Headers .../TestFramework.framework/Headers/TestFramework.h ... Clang will treat the presence of this file as an indicator that the framework should be treated as a system framework, regardless of how it was found in the framework search path. For consistency, we recommend that such files never be included in installed versions of the framework. Availability attribute ====================== Clang introduces the ``availability`` attribute, which can be placed on declarations to describe the lifecycle of that declaration relative to operating system versions. Consider the function declaration for a hypothetical function ``f``: .. code-block:: c++ void f(void) __attribute__((availability(macosx,introduced=10.4,deprecated=10.6,obsoleted=10.7))); The availability attribute states that ``f`` was introduced in Mac OS X 10.4, deprecated in Mac OS X 10.6, and obsoleted in Mac OS X 10.7. This information is used by Clang to determine when it is safe to use ``f``: for example, if Clang is instructed to compile code for Mac OS X 10.5, a call to ``f()`` succeeds. If Clang is instructed to compile code for Mac OS X 10.6, the call succeeds but Clang emits a warning specifying that the function is deprecated. Finally, if Clang is instructed to compile code for Mac OS X 10.7, the call fails because ``f()`` is no longer available. The availability attribute is a comma-separated list starting with the platform name and then including clauses specifying important milestones in the declaration's lifetime (in any order) along with additional information. Those clauses can be: introduced=\ *version* The first version in which this declaration was introduced. deprecated=\ *version* The first version in which this declaration was deprecated, meaning that users should migrate away from this API. obsoleted=\ *version* The first version in which this declaration was obsoleted, meaning that it was removed completely and can no longer be used. unavailable This declaration is never available on this platform. message=\ *string-literal* Additional message text that Clang will provide when emitting a warning or error about use of a deprecated or obsoleted declaration. Useful to direct users to replacement APIs. Multiple availability attributes can be placed on a declaration, which may correspond to different platforms. Only the availability attribute with the platform corresponding to the target platform will be used; any others will be ignored. If no availability attribute specifies availability for the current target platform, the availability attributes are ignored. Supported platforms are: ``ios`` Apple's iOS operating system. The minimum deployment target is specified by the ``-mios-version-min=*version*`` or ``-miphoneos-version-min=*version*`` command-line arguments. ``macosx`` Apple's Mac OS X operating system. The minimum deployment target is specified by the ``-mmacosx-version-min=*version*`` command-line argument. A declaration can be used even when deploying back to a platform version prior to when the declaration was introduced. When this happens, the declaration is `weakly linked `_, as if the ``weak_import`` attribute were added to the declaration. A weakly-linked declaration may or may not be present a run-time, and a program can determine whether the declaration is present by checking whether the address of that declaration is non-NULL. If there are multiple declarations of the same entity, the availability attributes must either match on a per-platform basis or later declarations must not have availability attributes for that platform. For example: .. code-block:: c void g(void) __attribute__((availability(macosx,introduced=10.4))); void g(void) __attribute__((availability(macosx,introduced=10.4))); // okay, matches void g(void) __attribute__((availability(ios,introduced=4.0))); // okay, adds a new platform void g(void); // okay, inherits both macosx and ios availability from above. void g(void) __attribute__((availability(macosx,introduced=10.5))); // error: mismatch When one method overrides another, the overriding method can be more widely available than the overridden method, e.g.,: .. code-block:: objc @interface A - (id)method __attribute__((availability(macosx,introduced=10.4))); - (id)method2 __attribute__((availability(macosx,introduced=10.4))); @end @interface B : A - (id)method __attribute__((availability(macosx,introduced=10.3))); // okay: method moved into base class later - (id)method __attribute__((availability(macosx,introduced=10.5))); // error: this method was available via the base class in 10.4 @end Checks for Standard Language Features ===================================== The ``__has_feature`` macro can be used to query if certain standard language features are enabled. The ``__has_extension`` macro can be used to query if language features are available as an extension when compiling for a standard which does not provide them. The features which can be tested are listed here. C++98 ----- The features listed below are part of the C++98 standard. These features are enabled by default when compiling C++ code. C++ exceptions ^^^^^^^^^^^^^^ Use ``__has_feature(cxx_exceptions)`` to determine if C++ exceptions have been enabled. For example, compiling code with ``-fno-exceptions`` disables C++ exceptions. C++ RTTI ^^^^^^^^ Use ``__has_feature(cxx_rtti)`` to determine if C++ RTTI has been enabled. For example, compiling code with ``-fno-rtti`` disables the use of RTTI. C++11 ----- The features listed below are part of the C++11 standard. As a result, all these features are enabled with the ``-std=c++11`` or ``-std=gnu++11`` option when compiling C++ code. C++11 SFINAE includes access control ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_access_control_sfinae)`` or ``__has_extension(cxx_access_control_sfinae)`` to determine whether access-control errors (e.g., calling a private constructor) are considered to be template argument deduction errors (aka SFINAE errors), per `C++ DR1170 `_. C++11 alias templates ^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_alias_templates)`` or ``__has_extension(cxx_alias_templates)`` to determine if support for C++11's alias declarations and alias templates is enabled. C++11 alignment specifiers ^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_alignas)`` or ``__has_extension(cxx_alignas)`` to determine if support for alignment specifiers using ``alignas`` is enabled. C++11 attributes ^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_attributes)`` or ``__has_extension(cxx_attributes)`` to determine if support for attribute parsing with C++11's square bracket notation is enabled. C++11 generalized constant expressions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_constexpr)`` to determine if support for generalized constant expressions (e.g., ``constexpr``) is enabled. C++11 ``decltype()`` ^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_decltype)`` or ``__has_extension(cxx_decltype)`` to determine if support for the ``decltype()`` specifier is enabled. C++11's ``decltype`` does not require type-completeness of a function call expression. Use ``__has_feature(cxx_decltype_incomplete_return_types)`` or ``__has_extension(cxx_decltype_incomplete_return_types)`` to determine if support for this feature is enabled. C++11 default template arguments in function templates ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_default_function_template_args)`` or ``__has_extension(cxx_default_function_template_args)`` to determine if support for default template arguments in function templates is enabled. C++11 ``default``\ ed functions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_defaulted_functions)`` or ``__has_extension(cxx_defaulted_functions)`` to determine if support for defaulted function definitions (with ``= default``) is enabled. C++11 delegating constructors ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_delegating_constructors)`` to determine if support for delegating constructors is enabled. C++11 ``deleted`` functions ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_deleted_functions)`` or ``__has_extension(cxx_deleted_functions)`` to determine if support for deleted function definitions (with ``= delete``) is enabled. C++11 explicit conversion functions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_explicit_conversions)`` to determine if support for ``explicit`` conversion functions is enabled. C++11 generalized initializers ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_generalized_initializers)`` to determine if support for generalized initializers (using braced lists and ``std::initializer_list``) is enabled. C++11 implicit move constructors/assignment operators ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_implicit_moves)`` to determine if Clang will implicitly generate move constructors and move assignment operators where needed. C++11 inheriting constructors ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_inheriting_constructors)`` to determine if support for inheriting constructors is enabled. Clang does not currently implement this feature. C++11 inline namespaces ^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_inline_namespaces)`` or ``__has_extension(cxx_inline_namespaces)`` to determine if support for inline namespaces is enabled. C++11 lambdas ^^^^^^^^^^^^^ Use ``__has_feature(cxx_lambdas)`` or ``__has_extension(cxx_lambdas)`` to determine if support for lambdas is enabled. C++11 local and unnamed types as template arguments ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_local_type_template_args)`` or ``__has_extension(cxx_local_type_template_args)`` to determine if support for local and unnamed types as template arguments is enabled. C++11 noexcept ^^^^^^^^^^^^^^ Use ``__has_feature(cxx_noexcept)`` or ``__has_extension(cxx_noexcept)`` to determine if support for noexcept exception specifications is enabled. C++11 in-class non-static data member initialization ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_nonstatic_member_init)`` to determine whether in-class initialization of non-static data members is enabled. C++11 ``nullptr`` ^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_nullptr)`` or ``__has_extension(cxx_nullptr)`` to determine if support for ``nullptr`` is enabled. C++11 ``override control`` ^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_override_control)`` or ``__has_extension(cxx_override_control)`` to determine if support for the override control keywords is enabled. C++11 reference-qualified functions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_reference_qualified_functions)`` or ``__has_extension(cxx_reference_qualified_functions)`` to determine if support for reference-qualified functions (e.g., member functions with ``&`` or ``&&`` applied to ``*this``) is enabled. C++11 range-based ``for`` loop ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_range_for)`` or ``__has_extension(cxx_range_for)`` to determine if support for the range-based for loop is enabled. C++11 raw string literals ^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_raw_string_literals)`` to determine if support for raw string literals (e.g., ``R"x(foo\bar)x"``) is enabled. C++11 rvalue references ^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_rvalue_references)`` or ``__has_extension(cxx_rvalue_references)`` to determine if support for rvalue references is enabled. C++11 ``static_assert()`` ^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_static_assert)`` or ``__has_extension(cxx_static_assert)`` to determine if support for compile-time assertions using ``static_assert`` is enabled. C++11 type inference ^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_auto_type)`` or ``__has_extension(cxx_auto_type)`` to determine C++11 type inference is supported using the ``auto`` specifier. If this is disabled, ``auto`` will instead be a storage class specifier, as in C or C++98. C++11 strongly typed enumerations ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_strong_enums)`` or ``__has_extension(cxx_strong_enums)`` to determine if support for strongly typed, scoped enumerations is enabled. C++11 trailing return type ^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_trailing_return)`` or ``__has_extension(cxx_trailing_return)`` to determine if support for the alternate function declaration syntax with trailing return type is enabled. C++11 Unicode string literals ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_unicode_literals)`` to determine if support for Unicode string literals is enabled. C++11 unrestricted unions ^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_unrestricted_unions)`` to determine if support for unrestricted unions is enabled. C++11 user-defined literals ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_user_literals)`` to determine if support for user-defined literals is enabled. C++11 variadic templates ^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(cxx_variadic_templates)`` or ``__has_extension(cxx_variadic_templates)`` to determine if support for variadic templates is enabled. C11 --- The features listed below are part of the C11 standard. As a result, all these features are enabled with the ``-std=c11`` or ``-std=gnu11`` option when compiling C code. Additionally, because these features are all backward-compatible, they are available as extensions in all language modes. C11 alignment specifiers ^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(c_alignas)`` or ``__has_extension(c_alignas)`` to determine if support for alignment specifiers using ``_Alignas`` is enabled. C11 atomic operations ^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(c_atomic)`` or ``__has_extension(c_atomic)`` to determine if support for atomic types using ``_Atomic`` is enabled. Clang also provides :ref:`a set of builtins ` which can be used to implement the ```` operations on ``_Atomic`` types. C11 generic selections ^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(c_generic_selections)`` or ``__has_extension(c_generic_selections)`` to determine if support for generic selections is enabled. As an extension, the C11 generic selection expression is available in all languages supported by Clang. The syntax is the same as that given in the C11 standard. In C, type compatibility is decided according to the rules given in the appropriate standard, but in C++, which lacks the type compatibility rules used in C, types are considered compatible only if they are equivalent. C11 ``_Static_assert()`` ^^^^^^^^^^^^^^^^^^^^^^^^ Use ``__has_feature(c_static_assert)`` or ``__has_extension(c_static_assert)`` to determine if support for compile-time assertions using ``_Static_assert`` is enabled. Checks for Type Traits ====================== Clang supports the `GNU C++ type traits `_ and a subset of the `Microsoft Visual C++ Type traits `_. For each supported type trait ``__X``, ``__has_extension(X)`` indicates the presence of the type trait. For example: .. code-block:: c++ #if __has_extension(is_convertible_to) template struct is_convertible_to { static const bool value = __is_convertible_to(From, To); }; #else // Emulate type trait #endif The following type traits are supported by Clang: * ``__has_nothrow_assign`` (GNU, Microsoft) * ``__has_nothrow_copy`` (GNU, Microsoft) * ``__has_nothrow_constructor`` (GNU, Microsoft) * ``__has_trivial_assign`` (GNU, Microsoft) * ``__has_trivial_copy`` (GNU, Microsoft) * ``__has_trivial_constructor`` (GNU, Microsoft) * ``__has_trivial_destructor`` (GNU, Microsoft) * ``__has_virtual_destructor`` (GNU, Microsoft) * ``__is_abstract`` (GNU, Microsoft) * ``__is_base_of`` (GNU, Microsoft) * ``__is_class`` (GNU, Microsoft) * ``__is_convertible_to`` (Microsoft) * ``__is_empty`` (GNU, Microsoft) * ``__is_enum`` (GNU, Microsoft) * ``__is_interface_class`` (Microsoft) * ``__is_pod`` (GNU, Microsoft) * ``__is_polymorphic`` (GNU, Microsoft) * ``__is_union`` (GNU, Microsoft) * ``__is_literal(type)``: Determines whether the given type is a literal type * ``__is_final``: Determines whether the given type is declared with a ``final`` class-virt-specifier. * ``__underlying_type(type)``: Retrieves the underlying type for a given ``enum`` type. This trait is required to implement the C++11 standard library. * ``__is_trivially_assignable(totype, fromtype)``: Determines whether a value of type ``totype`` can be assigned to from a value of type ``fromtype`` such that no non-trivial functions are called as part of that assignment. This trait is required to implement the C++11 standard library. * ``__is_trivially_constructible(type, argtypes...)``: Determines whether a value of type ``type`` can be direct-initialized with arguments of types ``argtypes...`` such that no non-trivial functions are called as part of that initialization. This trait is required to implement the C++11 standard library. Blocks ====== The syntax and high level language feature description is in :doc:`BlockLanguageSpec`. Implementation and ABI details for the clang implementation are in :doc:`Block-ABI-Apple`. Query for this feature with ``__has_extension(blocks)``. Objective-C Features ==================== Related result types -------------------- According to Cocoa conventions, Objective-C methods with certain names ("``init``", "``alloc``", etc.) always return objects that are an instance of the receiving class's type. Such methods are said to have a "related result type", meaning that a message send to one of these methods will have the same static type as an instance of the receiver class. For example, given the following classes: .. code-block:: objc @interface NSObject + (id)alloc; - (id)init; @end @interface NSArray : NSObject @end and this common initialization pattern .. code-block:: objc NSArray *array = [[NSArray alloc] init]; the type of the expression ``[NSArray alloc]`` is ``NSArray*`` because ``alloc`` implicitly has a related result type. Similarly, the type of the expression ``[[NSArray alloc] init]`` is ``NSArray*``, since ``init`` has a related result type and its receiver is known to have the type ``NSArray *``. If neither ``alloc`` nor ``init`` had a related result type, the expressions would have had type ``id``, as declared in the method signature. A method with a related result type can be declared by using the type ``instancetype`` as its result type. ``instancetype`` is a contextual keyword that is only permitted in the result type of an Objective-C method, e.g. .. code-block:: objc @interface A + (instancetype)constructAnA; @end The related result type can also be inferred for some methods. To determine whether a method has an inferred related result type, the first word in the camel-case selector (e.g., "``init``" in "``initWithObjects``") is considered, and the method will have a related result type if its return type is compatible with the type of its class and if: * the first word is "``alloc``" or "``new``", and the method is a class method, or * the first word is "``autorelease``", "``init``", "``retain``", or "``self``", and the method is an instance method. If a method with a related result type is overridden by a subclass method, the subclass method must also return a type that is compatible with the subclass type. For example: .. code-block:: objc @interface NSString : NSObject - (NSUnrelated *)init; // incorrect usage: NSUnrelated is not NSString or a superclass of NSString @end Related result types only affect the type of a message send or property access via the given method. In all other respects, a method with a related result type is treated the same way as method that returns ``id``. Use ``__has_feature(objc_instancetype)`` to determine whether the ``instancetype`` contextual keyword is available. Automatic reference counting ---------------------------- Clang provides support for :doc:`automated reference counting ` in Objective-C, which eliminates the need for manual ``retain``/``release``/``autorelease`` message sends. There are two feature macros associated with automatic reference counting: ``__has_feature(objc_arc)`` indicates the availability of automated reference counting in general, while ``__has_feature(objc_arc_weak)`` indicates that automated reference counting also includes support for ``__weak`` pointers to Objective-C objects. .. _objc-fixed-enum: Enumerations with a fixed underlying type ----------------------------------------- Clang provides support for C++11 enumerations with a fixed underlying type within Objective-C. For example, one can write an enumeration type as: .. code-block:: c++ typedef enum : unsigned char { Red, Green, Blue } Color; This specifies that the underlying type, which is used to store the enumeration value, is ``unsigned char``. Use ``__has_feature(objc_fixed_enum)`` to determine whether support for fixed underlying types is available in Objective-C. Interoperability with C++11 lambdas ----------------------------------- Clang provides interoperability between C++11 lambdas and blocks-based APIs, by permitting a lambda to be implicitly converted to a block pointer with the corresponding signature. For example, consider an API such as ``NSArray``'s array-sorting method: .. code-block:: objc - (NSArray *)sortedArrayUsingComparator:(NSComparator)cmptr; ``NSComparator`` is simply a typedef for the block pointer ``NSComparisonResult (^)(id, id)``, and parameters of this type are generally provided with block literals as arguments. However, one can also use a C++11 lambda so long as it provides the same signature (in this case, accepting two parameters of type ``id`` and returning an ``NSComparisonResult``): .. code-block:: objc NSArray *array = @[@"string 1", @"string 21", @"string 12", @"String 11", @"String 02"]; const NSStringCompareOptions comparisonOptions = NSCaseInsensitiveSearch | NSNumericSearch | NSWidthInsensitiveSearch | NSForcedOrderingSearch; NSLocale *currentLocale = [NSLocale currentLocale]; NSArray *sorted = [array sortedArrayUsingComparator:[=](id s1, id s2) -> NSComparisonResult { NSRange string1Range = NSMakeRange(0, [s1 length]); return [s1 compare:s2 options:comparisonOptions range:string1Range locale:currentLocale]; }]; NSLog(@"sorted: %@", sorted); This code relies on an implicit conversion from the type of the lambda expression (an unnamed, local class type called the *closure type*) to the corresponding block pointer type. The conversion itself is expressed by a conversion operator in that closure type that produces a block pointer with the same signature as the lambda itself, e.g., .. code-block:: objc operator NSComparisonResult (^)(id, id)() const; This conversion function returns a new block that simply forwards the two parameters to the lambda object (which it captures by copy), then returns the result. The returned block is first copied (with ``Block_copy``) and then autoreleased. As an optimization, if a lambda expression is immediately converted to a block pointer (as in the first example, above), then the block is not copied and autoreleased: rather, it is given the same lifetime as a block literal written at that point in the program, which avoids the overhead of copying a block to the heap in the common case. The conversion from a lambda to a block pointer is only available in Objective-C++, and not in C++ with blocks, due to its use of Objective-C memory management (autorelease). Object Literals and Subscripting -------------------------------- Clang provides support for :doc:`Object Literals and Subscripting ` in Objective-C, which simplifies common Objective-C programming patterns, makes programs more concise, and improves the safety of container creation. There are several feature macros associated with object literals and subscripting: ``__has_feature(objc_array_literals)`` tests the availability of array literals; ``__has_feature(objc_dictionary_literals)`` tests the availability of dictionary literals; ``__has_feature(objc_subscripting)`` tests the availability of object subscripting. Objective-C Autosynthesis of Properties --------------------------------------- Clang provides support for autosynthesis of declared properties. Using this feature, clang provides default synthesis of those properties not declared @dynamic and not having user provided backing getter and setter methods. ``__has_feature(objc_default_synthesize_properties)`` checks for availability of this feature in version of clang being used. .. _langext-objc_method_family: The ``objc_method_family`` attribute ------------------------------------ Many methods in Objective-C have conventional meanings determined by their selectors. It is sometimes useful to be able to mark a method as having a particular conventional meaning despite not having the right selector, or as not having the conventional meaning that its selector would suggest. For these use cases, we provide an attribute to specifically describe the "method family" that a method belongs to. **Usage**: ``__attribute__((objc_method_family(X)))``, where ``X`` is one of ``none``, ``alloc``, ``copy``, ``init``, ``mutableCopy``, or ``new``. This attribute can only be placed at the end of a method declaration: .. code-block:: objc - (NSString *)initMyStringValue __attribute__((objc_method_family(none))); Users who do not wish to change the conventional meaning of a method, and who merely want to document its non-standard retain and release semantics, should use the :ref:`retaining behavior attributes ` described below. Query for this feature with ``__has_attribute(objc_method_family)``. .. _langext-objc-retain-release: Objective-C retaining behavior attributes ----------------------------------------- In Objective-C, functions and methods are generally assumed to follow the `Cocoa Memory Management `_ conventions for ownership of object arguments and return values. However, there are exceptions, and so Clang provides attributes to allow these exceptions to be documented. This are used by ARC and the `static analyzer `_ Some exceptions may be better described using the :ref:`objc_method_family ` attribute instead. **Usage**: The ``ns_returns_retained``, ``ns_returns_not_retained``, ``ns_returns_autoreleased``, ``cf_returns_retained``, and ``cf_returns_not_retained`` attributes can be placed on methods and functions that return Objective-C or CoreFoundation objects. They are commonly placed at the end of a function prototype or method declaration: .. code-block:: objc id foo() __attribute__((ns_returns_retained)); - (NSString *)bar:(int)x __attribute__((ns_returns_retained)); The ``*_returns_retained`` attributes specify that the returned object has a +1 retain count. The ``*_returns_not_retained`` attributes specify that the return object has a +0 retain count, even if the normal convention for its selector would be +1. ``ns_returns_autoreleased`` specifies that the returned object is +0, but is guaranteed to live at least as long as the next flush of an autorelease pool. **Usage**: The ``ns_consumed`` and ``cf_consumed`` attributes can be placed on an parameter declaration; they specify that the argument is expected to have a +1 retain count, which will be balanced in some way by the function or method. The ``ns_consumes_self`` attribute can only be placed on an Objective-C method; it specifies that the method expects its ``self`` parameter to have a +1 retain count, which it will balance in some way. .. code-block:: objc void foo(__attribute__((ns_consumed)) NSString *string); - (void) bar __attribute__((ns_consumes_self)); - (void) baz:(id) __attribute__((ns_consumed)) x; Further examples of these attributes are available in the static analyzer's `list of annotations for analysis `_. Query for these features with ``__has_attribute(ns_consumed)``, ``__has_attribute(ns_returns_retained)``, etc. Function Overloading in C ========================= Clang provides support for C++ function overloading in C. Function overloading in C is introduced using the ``overloadable`` attribute. For example, one might provide several overloaded versions of a ``tgsin`` function that invokes the appropriate standard function computing the sine of a value with ``float``, ``double``, or ``long double`` precision: .. code-block:: c #include float __attribute__((overloadable)) tgsin(float x) { return sinf(x); } double __attribute__((overloadable)) tgsin(double x) { return sin(x); } long double __attribute__((overloadable)) tgsin(long double x) { return sinl(x); } Given these declarations, one can call ``tgsin`` with a ``float`` value to receive a ``float`` result, with a ``double`` to receive a ``double`` result, etc. Function overloading in C follows the rules of C++ function overloading to pick the best overload given the call arguments, with a few C-specific semantics: * Conversion from ``float`` or ``double`` to ``long double`` is ranked as a floating-point promotion (per C99) rather than as a floating-point conversion (as in C++). * A conversion from a pointer of type ``T*`` to a pointer of type ``U*`` is considered a pointer conversion (with conversion rank) if ``T`` and ``U`` are compatible types. * A conversion from type ``T`` to a value of type ``U`` is permitted if ``T`` and ``U`` are compatible types. This conversion is given "conversion" rank. The declaration of ``overloadable`` functions is restricted to function declarations and definitions. Most importantly, if any function with a given name is given the ``overloadable`` attribute, then all function declarations and definitions with that name (and in that scope) must have the ``overloadable`` attribute. This rule even applies to redeclarations of functions whose original declaration had the ``overloadable`` attribute, e.g., .. code-block:: c int f(int) __attribute__((overloadable)); float f(float); // error: declaration of "f" must have the "overloadable" attribute int g(int) __attribute__((overloadable)); int g(int) { } // error: redeclaration of "g" must also have the "overloadable" attribute Functions marked ``overloadable`` must have prototypes. Therefore, the following code is ill-formed: .. code-block:: c int h() __attribute__((overloadable)); // error: h does not have a prototype However, ``overloadable`` functions are allowed to use a ellipsis even if there are no named parameters (as is permitted in C++). This feature is particularly useful when combined with the ``unavailable`` attribute: .. code-block:: c++ void honeypot(...) __attribute__((overloadable, unavailable)); // calling me is an error Functions declared with the ``overloadable`` attribute have their names mangled according to the same rules as C++ function names. For example, the three ``tgsin`` functions in our motivating example get the mangled names ``_Z5tgsinf``, ``_Z5tgsind``, and ``_Z5tgsine``, respectively. There are two caveats to this use of name mangling: * Future versions of Clang may change the name mangling of functions overloaded in C, so you should not depend on an specific mangling. To be completely safe, we strongly urge the use of ``static inline`` with ``overloadable`` functions. * The ``overloadable`` attribute has almost no meaning when used in C++, because names will already be mangled and functions are already overloadable. However, when an ``overloadable`` function occurs within an ``extern "C"`` linkage specification, it's name *will* be mangled in the same way as it would in C. Query for this feature with ``__has_extension(attribute_overloadable)``. Initializer lists for complex numbers in C ========================================== clang supports an extension which allows the following in C: .. code-block:: c++ #include #include complex float x = { 1.0f, INFINITY }; // Init to (1, Inf) This construct is useful because there is no way to separately initialize the real and imaginary parts of a complex variable in standard C, given that clang does not support ``_Imaginary``. (Clang also supports the ``__real__`` and ``__imag__`` extensions from gcc, which help in some cases, but are not usable in static initializers.) Note that this extension does not allow eliding the braces; the meaning of the following two lines is different: .. code-block:: c++ complex float x[] = { { 1.0f, 1.0f } }; // [0] = (1, 1) complex float x[] = { 1.0f, 1.0f }; // [0] = (1, 0), [1] = (1, 0) This extension also works in C++ mode, as far as that goes, but does not apply to the C++ ``std::complex``. (In C++11, list initialization allows the same syntax to be used with ``std::complex`` with the same meaning.) Builtin Functions ================= Clang supports a number of builtin library functions with the same syntax as GCC, including things like ``__builtin_nan``, ``__builtin_constant_p``, ``__builtin_choose_expr``, ``__builtin_types_compatible_p``, ``__sync_fetch_and_add``, etc. In addition to the GCC builtins, Clang supports a number of builtins that GCC does not, which are listed here. Please note that Clang does not and will not support all of the GCC builtins for vector operations. Instead of using builtins, you should use the functions defined in target-specific header files like ````, which define portable wrappers for these. Many of the Clang versions of these functions are implemented directly in terms of :ref:`extended vector support ` instead of builtins, in order to reduce the number of builtins that we need to implement. ``__builtin_readcyclecounter`` ------------------------------ ``__builtin_readcyclecounter`` is used to access the cycle counter register (or a similar low-latency, high-accuracy clock) on those targets that support it. **Syntax**: .. code-block:: c++ __builtin_readcyclecounter() **Example of Use**: .. code-block:: c++ unsigned long long t0 = __builtin_readcyclecounter(); do_something(); unsigned long long t1 = __builtin_readcyclecounter(); unsigned long long cycles_to_do_something = t1 - t0; // assuming no overflow **Description**: The ``__builtin_readcyclecounter()`` builtin returns the cycle counter value, which may be either global or process/thread-specific depending on the target. As the backing counters often overflow quickly (on the order of seconds) this should only be used for timing small intervals. When not supported by the target, the return value is always zero. This builtin takes no arguments and produces an unsigned long long result. Query for this feature with ``__has_builtin(__builtin_readcyclecounter)``. .. _langext-__builtin_shufflevector: ``__builtin_shufflevector`` --------------------------- ``__builtin_shufflevector`` is used to express generic vector permutation/shuffle/swizzle operations. This builtin is also very important for the implementation of various target-specific header files like ````. **Syntax**: .. code-block:: c++ __builtin_shufflevector(vec1, vec2, index1, index2, ...) **Examples**: .. code-block:: c++ // Identity operation - return 4-element vector V1. __builtin_shufflevector(V1, V1, 0, 1, 2, 3) // "Splat" element 0 of V1 into a 4-element result. __builtin_shufflevector(V1, V1, 0, 0, 0, 0) // Reverse 4-element vector V1. __builtin_shufflevector(V1, V1, 3, 2, 1, 0) // Concatenate every other element of 4-element vectors V1 and V2. __builtin_shufflevector(V1, V2, 0, 2, 4, 6) // Concatenate every other element of 8-element vectors V1 and V2. __builtin_shufflevector(V1, V2, 0, 2, 4, 6, 8, 10, 12, 14) **Description**: The first two arguments to ``__builtin_shufflevector`` are vectors that have the same element type. The remaining arguments are a list of integers that specify the elements indices of the first two vectors that should be extracted and returned in a new vector. These element indices are numbered sequentially starting with the first vector, continuing into the second vector. Thus, if ``vec1`` is a 4-element vector, index 5 would refer to the second element of ``vec2``. The result of ``__builtin_shufflevector`` is a vector with the same element type as ``vec1``/``vec2`` but that has an element count equal to the number of indices specified. Query for this feature with ``__has_builtin(__builtin_shufflevector)``. ``__builtin_unreachable`` ------------------------- ``__builtin_unreachable`` is used to indicate that a specific point in the program cannot be reached, even if the compiler might otherwise think it can. This is useful to improve optimization and eliminates certain warnings. For example, without the ``__builtin_unreachable`` in the example below, the compiler assumes that the inline asm can fall through and prints a "function declared '``noreturn``' should not return" warning. **Syntax**: .. code-block:: c++ __builtin_unreachable() **Example of use**: .. code-block:: c++ void myabort(void) __attribute__((noreturn)); void myabort(void) { asm("int3"); __builtin_unreachable(); } **Description**: The ``__builtin_unreachable()`` builtin has completely undefined behavior. Since it has undefined behavior, it is a statement that it is never reached and the optimizer can take advantage of this to produce better code. This builtin takes no arguments and produces a void result. Query for this feature with ``__has_builtin(__builtin_unreachable)``. ``__sync_swap`` --------------- ``__sync_swap`` is used to atomically swap integers or pointers in memory. **Syntax**: .. code-block:: c++ type __sync_swap(type *ptr, type value, ...) **Example of Use**: .. code-block:: c++ int old_value = __sync_swap(&value, new_value); **Description**: The ``__sync_swap()`` builtin extends the existing ``__sync_*()`` family of atomic intrinsics to allow code to atomically swap the current value with the new value. More importantly, it helps developers write more efficient and correct code by avoiding expensive loops around ``__sync_bool_compare_and_swap()`` or relying on the platform specific implementation details of ``__sync_lock_test_and_set()``. The ``__sync_swap()`` builtin is a full barrier. Multiprecision Arithmetic Builtins ---------------------------------- Clang provides a set of builtins which expose multiprecision arithmetic in a manner amenable to C. They all have the following form: .. code-block:: c unsigned x = ..., y = ..., carryin = ..., carryout; unsigned sum = __builtin_addc(x, y, carryin, &carryout); Thus one can form a multiprecision addition chain in the following manner: .. code-block:: c unsigned *x, *y, *z, carryin=0, carryout; z[0] = __builtin_addc(x[0], y[0], carryin, &carryout); carryin = carryout; z[1] = __builtin_addc(x[1], y[1], carryin, &carryout); carryin = carryout; z[2] = __builtin_addc(x[2], y[2], carryin, &carryout); carryin = carryout; z[3] = __builtin_addc(x[3], y[3], carryin, &carryout); The complete list of builtins are: .. code-block:: c unsigned short __builtin_addcs (unsigned short x, unsigned short y, unsigned short carryin, unsigned short *carryout); unsigned __builtin_addc (unsigned x, unsigned y, unsigned carryin, unsigned *carryout); unsigned long __builtin_addcl (unsigned long x, unsigned long y, unsigned long carryin, unsigned long *carryout); unsigned long long __builtin_addcll(unsigned long long x, unsigned long long y, unsigned long long carryin, unsigned long long *carryout); unsigned short __builtin_subcs (unsigned short x, unsigned short y, unsigned short carryin, unsigned short *carryout); unsigned __builtin_subc (unsigned x, unsigned y, unsigned carryin, unsigned *carryout); unsigned long __builtin_subcl (unsigned long x, unsigned long y, unsigned long carryin, unsigned long *carryout); unsigned long long __builtin_subcll(unsigned long long x, unsigned long long y, unsigned long long carryin, unsigned long long *carryout); .. _langext-__c11_atomic: __c11_atomic builtins --------------------- Clang provides a set of builtins which are intended to be used to implement C11's ```` header. These builtins provide the semantics of the ``_explicit`` form of the corresponding C11 operation, and are named with a ``__c11_`` prefix. The supported operations are: * ``__c11_atomic_init`` * ``__c11_atomic_thread_fence`` * ``__c11_atomic_signal_fence`` * ``__c11_atomic_is_lock_free`` * ``__c11_atomic_store`` * ``__c11_atomic_load`` * ``__c11_atomic_exchange`` * ``__c11_atomic_compare_exchange_strong`` * ``__c11_atomic_compare_exchange_weak`` * ``__c11_atomic_fetch_add`` * ``__c11_atomic_fetch_sub`` * ``__c11_atomic_fetch_and`` * ``__c11_atomic_fetch_or`` * ``__c11_atomic_fetch_xor`` Non-standard C++11 Attributes ============================= Clang's non-standard C++11 attributes live in the ``clang`` attribute namespace. The ``clang::fallthrough`` attribute ------------------------------------ The ``clang::fallthrough`` attribute is used along with the ``-Wimplicit-fallthrough`` argument to annotate intentional fall-through between switch labels. It can only be applied to a null statement placed at a point of execution between any statement and the next switch label. It is common to mark these places with a specific comment, but this attribute is meant to replace comments with a more strict annotation, which can be checked by the compiler. This attribute doesn't change semantics of the code and can be used wherever an intended fall-through occurs. It is designed to mimic control-flow statements like ``break;``, so it can be placed in most places where ``break;`` can, but only if there are no statements on the execution path between it and the next switch label. Here is an example: .. code-block:: c++ // compile with -Wimplicit-fallthrough switch (n) { case 22: case 33: // no warning: no statements between case labels f(); case 44: // warning: unannotated fall-through g(); [[clang::fallthrough]]; case 55: // no warning if (x) { h(); break; } else { i(); [[clang::fallthrough]]; } case 66: // no warning p(); [[clang::fallthrough]]; // warning: fallthrough annotation does not // directly precede case label q(); case 77: // warning: unannotated fall-through r(); } ``gnu::`` attributes -------------------- Clang also supports GCC's ``gnu`` attribute namespace. All GCC attributes which are accepted with the ``__attribute__((foo))`` syntax are also accepted as ``[[gnu::foo]]``. This only extends to attributes which are specified by GCC (see the list of `GCC function attributes `_, `GCC variable attributes `_, and `GCC type attributes `_. As with the GCC implementation, these attributes must appertain to the *declarator-id* in a declaration, which means they must go either at the start of the declaration or immediately after the name being declared. For example, this applies the GNU ``unused`` attribute to ``a`` and ``f``, and also applies the GNU ``noreturn`` attribute to ``f``. .. code-block:: c++ [[gnu::unused]] int a, f [[gnu::noreturn]] (); Target-Specific Extensions ========================== Clang supports some language features conditionally on some targets. X86/X86-64 Language Extensions ------------------------------ The X86 backend has these language extensions: Memory references off the GS segment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Annotating a pointer with address space #256 causes it to be code generated relative to the X86 GS segment register, and address space #257 causes it to be relative to the X86 FS segment. Note that this is a very very low-level feature that should only be used if you know what you're doing (for example in an OS kernel). Here is an example: .. code-block:: c++ #define GS_RELATIVE __attribute__((address_space(256))) int foo(int GS_RELATIVE *P) { return *P; } Which compiles to (on X86-32): .. code-block:: gas _foo: movl 4(%esp), %eax movl %gs:(%eax), %eax ret Extensions for Static Analysis ============================== Clang supports additional attributes that are useful for documenting program invariants and rules for static analysis tools, such as the `Clang Static Analyzer `_. These attributes are documented in the analyzer's `list of source-level annotations `_. Extensions for Dynamic Analysis =============================== .. _langext-address_sanitizer: AddressSanitizer ---------------- Use ``__has_feature(address_sanitizer)`` to check if the code is being built with :doc:`AddressSanitizer`. Use ``__attribute__((no_sanitize_address))`` on a function declaration to specify that address safety instrumentation (e.g. AddressSanitizer) should not be applied to that function. .. _langext-thread_sanitizer: ThreadSanitizer ---------------- Use ``__has_feature(thread_sanitizer)`` to check if the code is being built with :doc:`ThreadSanitizer`. Use ``__attribute__((no_sanitize_thread))`` on a function declaration to specify that checks for data races on plain (non-atomic) memory accesses should not be inserted by ThreadSanitizer. The function may still be instrumented by the tool to avoid false positives in other places. .. _langext-memory_sanitizer: MemorySanitizer ---------------- Use ``__has_feature(memory_sanitizer)`` to check if the code is being built with :doc:`MemorySanitizer`. Use ``__attribute__((no_sanitize_memory))`` on a function declaration to specify that checks for uninitialized memory should not be inserted (e.g. by MemorySanitizer). The function may still be instrumented by the tool to avoid false positives in other places. Thread-Safety Annotation Checking ================================= Clang supports additional attributes for checking basic locking policies in multithreaded programs. Clang currently parses the following list of attributes, although **the implementation for these annotations is currently in development.** For more details, see the `GCC implementation `_. ``no_thread_safety_analysis`` ----------------------------- Use ``__attribute__((no_thread_safety_analysis))`` on a function declaration to specify that the thread safety analysis should not be run on that function. This attribute provides an escape hatch (e.g. for situations when it is difficult to annotate the locking policy). ``lockable`` ------------ Use ``__attribute__((lockable))`` on a class definition to specify that it has a lockable type (e.g. a Mutex class). This annotation is primarily used to check consistency. ``scoped_lockable`` ------------------- Use ``__attribute__((scoped_lockable))`` on a class definition to specify that it has a "scoped" lockable type. Objects of this type will acquire the lock upon construction and release it upon going out of scope. This annotation is primarily used to check consistency. ``guarded_var`` --------------- Use ``__attribute__((guarded_var))`` on a variable declaration to specify that the variable must be accessed while holding some lock. ``pt_guarded_var`` ------------------ Use ``__attribute__((pt_guarded_var))`` on a pointer declaration to specify that the pointer must be dereferenced while holding some lock. ``guarded_by(l)`` ----------------- Use ``__attribute__((guarded_by(l)))`` on a variable declaration to specify that the variable must be accessed while holding lock ``l``. ``pt_guarded_by(l)`` -------------------- Use ``__attribute__((pt_guarded_by(l)))`` on a pointer declaration to specify that the pointer must be dereferenced while holding lock ``l``. ``acquired_before(...)`` ------------------------ Use ``__attribute__((acquired_before(...)))`` on a declaration of a lockable variable to specify that the lock must be acquired before all attribute arguments. Arguments must be lockable type, and there must be at least one argument. ``acquired_after(...)`` ----------------------- Use ``__attribute__((acquired_after(...)))`` on a declaration of a lockable variable to specify that the lock must be acquired after all attribute arguments. Arguments must be lockable type, and there must be at least one argument. ``exclusive_lock_function(...)`` -------------------------------- Use ``__attribute__((exclusive_lock_function(...)))`` on a function declaration to specify that the function acquires all listed locks exclusively. This attribute takes zero or more arguments: either of lockable type or integers indexing into function parameters of lockable type. If no arguments are given, the acquired lock is implicitly ``this`` of the enclosing object. ``shared_lock_function(...)`` ----------------------------- Use ``__attribute__((shared_lock_function(...)))`` on a function declaration to specify that the function acquires all listed locks, although the locks may be shared (e.g. read locks). This attribute takes zero or more arguments: either of lockable type or integers indexing into function parameters of lockable type. If no arguments are given, the acquired lock is implicitly ``this`` of the enclosing object. ``exclusive_trylock_function(...)`` ----------------------------------- Use ``__attribute__((exclusive_lock_function(...)))`` on a function declaration to specify that the function will try (without blocking) to acquire all listed locks exclusively. This attribute takes one or more arguments. The first argument is an integer or boolean value specifying the return value of a successful lock acquisition. The remaining arugments are either of lockable type or integers indexing into function parameters of lockable type. If only one argument is given, the acquired lock is implicitly ``this`` of the enclosing object. ``shared_trylock_function(...)`` -------------------------------- Use ``__attribute__((shared_lock_function(...)))`` on a function declaration to specify that the function will try (without blocking) to acquire all listed locks, although the locks may be shared (e.g. read locks). This attribute takes one or more arguments. The first argument is an integer or boolean value specifying the return value of a successful lock acquisition. The remaining arugments are either of lockable type or integers indexing into function parameters of lockable type. If only one argument is given, the acquired lock is implicitly ``this`` of the enclosing object. ``unlock_function(...)`` ------------------------ Use ``__attribute__((unlock_function(...)))`` on a function declaration to specify that the function release all listed locks. This attribute takes zero or more arguments: either of lockable type or integers indexing into function parameters of lockable type. If no arguments are given, the acquired lock is implicitly ``this`` of the enclosing object. ``lock_returned(l)`` -------------------- Use ``__attribute__((lock_returned(l)))`` on a function declaration to specify that the function returns lock ``l`` (``l`` must be of lockable type). This annotation is used to aid in resolving lock expressions. ``locks_excluded(...)`` ----------------------- Use ``__attribute__((locks_excluded(...)))`` on a function declaration to specify that the function must not be called with the listed locks. Arguments must be lockable type, and there must be at least one argument. ``exclusive_locks_required(...)`` --------------------------------- Use ``__attribute__((exclusive_locks_required(...)))`` on a function declaration to specify that the function must be called while holding the listed exclusive locks. Arguments must be lockable type, and there must be at least one argument. ``shared_locks_required(...)`` ------------------------------ Use ``__attribute__((shared_locks_required(...)))`` on a function declaration to specify that the function must be called while holding the listed shared locks. Arguments must be lockable type, and there must be at least one argument. Type Safety Checking ==================== Clang supports additional attributes to enable checking type safety properties that can't be enforced by C type system. Usecases include: * MPI library implementations, where these attributes enable checking that buffer type matches the passed ``MPI_Datatype``; * for HDF5 library there is a similar usecase as MPI; * checking types of variadic functions' arguments for functions like ``fcntl()`` and ``ioctl()``. You can detect support for these attributes with ``__has_attribute()``. For example: .. code-block:: c++ #if defined(__has_attribute) # if __has_attribute(argument_with_type_tag) && \ __has_attribute(pointer_with_type_tag) && \ __has_attribute(type_tag_for_datatype) # define ATTR_MPI_PWT(buffer_idx, type_idx) __attribute__((pointer_with_type_tag(mpi,buffer_idx,type_idx))) /* ... other macros ... */ # endif #endif #if !defined(ATTR_MPI_PWT) # define ATTR_MPI_PWT(buffer_idx, type_idx) #endif int MPI_Send(void *buf, int count, MPI_Datatype datatype /*, other args omitted */) ATTR_MPI_PWT(1,3); ``argument_with_type_tag(...)`` ------------------------------- Use ``__attribute__((argument_with_type_tag(arg_kind, arg_idx, type_tag_idx)))`` on a function declaration to specify that the function accepts a type tag that determines the type of some other argument. ``arg_kind`` is an identifier that should be used when annotating all applicable type tags. This attribute is primarily useful for checking arguments of variadic functions (``pointer_with_type_tag`` can be used in most of non-variadic cases). For example: .. code-block:: c++ int fcntl(int fd, int cmd, ...) __attribute__(( argument_with_type_tag(fcntl,3,2) )); ``pointer_with_type_tag(...)`` ------------------------------ Use ``__attribute__((pointer_with_type_tag(ptr_kind, ptr_idx, type_tag_idx)))`` on a function declaration to specify that the function accepts a type tag that determines the pointee type of some other pointer argument. For example: .. code-block:: c++ int MPI_Send(void *buf, int count, MPI_Datatype datatype /*, other args omitted */) __attribute__(( pointer_with_type_tag(mpi,1,3) )); ``type_tag_for_datatype(...)`` ------------------------------ Clang supports annotating type tags of two forms. * **Type tag that is an expression containing a reference to some declared identifier.** Use ``__attribute__((type_tag_for_datatype(kind, type)))`` on a declaration with that identifier: .. code-block:: c++ extern struct mpi_datatype mpi_datatype_int __attribute__(( type_tag_for_datatype(mpi,int) )); #define MPI_INT ((MPI_Datatype) &mpi_datatype_int) * **Type tag that is an integral literal.** Introduce a ``static const`` variable with a corresponding initializer value and attach ``__attribute__((type_tag_for_datatype(kind, type)))`` on that declaration, for example: .. code-block:: c++ #define MPI_INT ((MPI_Datatype) 42) static const MPI_Datatype mpi_datatype_int __attribute__(( type_tag_for_datatype(mpi,int) )) = 42 The attribute also accepts an optional third argument that determines how the expression is compared to the type tag. There are two supported flags: * ``layout_compatible`` will cause types to be compared according to layout-compatibility rules (C++11 [class.mem] p 17, 18). This is implemented to support annotating types like ``MPI_DOUBLE_INT``. For example: .. code-block:: c++ /* In mpi.h */ struct internal_mpi_double_int { double d; int i; }; extern struct mpi_datatype mpi_datatype_double_int __attribute__(( type_tag_for_datatype(mpi, struct internal_mpi_double_int, layout_compatible) )); #define MPI_DOUBLE_INT ((MPI_Datatype) &mpi_datatype_double_int) /* In user code */ struct my_pair { double a; int b; }; struct my_pair *buffer; MPI_Send(buffer, 1, MPI_DOUBLE_INT /*, ... */); // no warning struct my_int_pair { int a; int b; } struct my_int_pair *buffer2; MPI_Send(buffer2, 1, MPI_DOUBLE_INT /*, ... */); // warning: actual buffer element // type 'struct my_int_pair' // doesn't match specified MPI_Datatype * ``must_be_null`` specifies that the expression should be a null pointer constant, for example: .. code-block:: c++ /* In mpi.h */ extern struct mpi_datatype mpi_datatype_null __attribute__(( type_tag_for_datatype(mpi, void, must_be_null) )); #define MPI_DATATYPE_NULL ((MPI_Datatype) &mpi_datatype_null) /* In user code */ MPI_Send(buffer, 1, MPI_DATATYPE_NULL /*, ... */); // warning: MPI_DATATYPE_NULL // was specified but buffer // is not a null pointer Format String Checking ====================== Clang supports the ``format`` attribute, which indicates that the function accepts a ``printf`` or ``scanf``-like format string and corresponding arguments or a ``va_list`` that contains these arguments. Please see `GCC documentation about format attribute `_ to find details about attribute syntax. Clang implements two kinds of checks with this attribute. #. Clang checks that the function with the ``format`` attribute is called with a format string that uses format specifiers that are allowed, and that arguments match the format string. This is the ``-Wformat`` warning, it is on by default. #. Clang checks that the format string argument is a literal string. This is the ``-Wformat-nonliteral`` warning, it is off by default. Clang implements this mostly the same way as GCC, but there is a difference for functions that accept a ``va_list`` argument (for example, ``vprintf``). GCC does not emit ``-Wformat-nonliteral`` warning for calls to such fuctions. Clang does not warn if the format string comes from a function parameter, where the function is annotated with a compatible attribute, otherwise it warns. For example: .. code-block:: c __attribute__((__format__ (__scanf__, 1, 3))) void foo(const char* s, char *buf, ...) { va_list ap; va_start(ap, buf); vprintf(s, ap); // warning: format string is not a string literal } In this case we warn because ``s`` contains a format string for a ``scanf``-like function, but it is passed to a ``printf``-like function. If the attribute is removed, clang still warns, because the format string is not a string literal. Another example: .. code-block:: c __attribute__((__format__ (__printf__, 1, 3))) void foo(const char* s, char *buf, ...) { va_list ap; va_start(ap, buf); vprintf(s, ap); // warning } In this case Clang does not warn because the format string ``s`` and the corresponding arguments are annotated. If the arguments are incorrect, the caller of ``foo`` will receive a warning.