Age | Commit message (Collapse) | Author |
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59922 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"previously defined here" diagnostics all notes.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59920 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"definitions", not declarations. Point out the location of the
original definition.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59919 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
diagnostic.
Also, point out where the previous decl was. This unxfails two tests.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59918 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with implicit quotes around them. This has a bunch of follow-on
effects and requires tweaking to a whole lot of code. This causes
a regression in two tests (xfailed) by causing it to emit things like:
Line 10: duplicate interface declaration for category 'MyClass1' ('Category1')
instead of:
Line 10: duplicate interface declaration for category 'MyClass1(Category1)'
I will fix this in a follow-up commit.
As part of this, I had to start switching stuff to use ->getDeclName() instead
of Decl::getName() for consistency. This is good, but I was planning to do this
as an independent patch. There will be several follow-on patches
to clean up some of the mess, but this patch is already too big.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59917 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59713 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59589 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
__builtin_prefetch code to only emit one diagnostic per builtin_prefetch.
While this has nothing to do with the rest of the patch, the code seemed
like overkill when I was updating it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59588 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59561 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
interface with protocols.
As soon as we detect duplicate interfaces, discontinue further semantic checks (returning the original interface).
This is now consistent with how we handle protocols (and less error prone in general).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59541 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
representing the names of declarations in the C family of
languages. DeclarationName is used in NamedDecl to store the name of
the declaration (naturally), and ObjCMethodDecl is now a NamedDecl.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59441 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58705 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@57899 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is over enthusiastic.
Fix <rdar://problem/6265257> warnings for ambiguous message send swamp other warnings.
Reworked Sema::MatchTwoMethodDeclarations() to optionally match based on method size and alignment (the default in GCC). Changed Sema::LookupInstanceMethodInGlobalPool() to use this feature.
Added -Wno-struct-selector-match to driver, however didn't hook it up yet. Added a FIXME that says this.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@57898 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
not match type of ivar
and
http://llvm.org/bugs/show_bug.cgi?id=2893
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@57640 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
scope) fails to handle overloaded selectors properly.
Long standing bug in Sema::ActOnInstanceMessage(). We now warn when messaging an "id" with multiple method signatures in scope. The diags are a little verbose, however they can be streamlined if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56843 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
mismatched properties.
Needed to make sure the relaxed type checking only applies to "readonly" properties.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56838 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56821 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
setter.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56785 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
effectively declare it for methods below.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56771 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56642 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56640 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- readonly and readwrite are mutually exclusive.
- assign, copy, and retain are mutually exclusive.
- copy and retain are invalid on non-object types.
- Warn about using default 'assign' property on object types
(attempting to follow gcc behavior).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@56507 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which are inherited from base clases or protocols.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@55790 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- It is not clear that this is the right approach, but this is at
least consistent with how interfaces are handled.
- This means NeXT now emits the correct metadata for properties in
protocols.
- This currently introduces a spurious warning involving inherited
properties in protocols or categories; however, it also fixes some
situations where we were failing to emit a warning. I will scrub
this code tomorrow and fix this issue as well as number of other
missed warnings / error situations that appear to exist.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@55407 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Add ObjCMethodDecl::createImplicitParams.
- Remove ObjCMethodDecl::set{Self,Cmd}Decl
- Remove Sema::CreateImplicitParameter
No (intended) functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@55356 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Change enum name to Kind.
- Change enum constants to English strings.
Also, fix getPropertyImplementation (which probably should be renamed)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@55354 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Drop MethodAttrs parameter to ObjCMethodDecl
- Call ProcessDeclAttributeList for interface & method decls.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@55068 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
start location.
The following case resulted in an invalid start location:
// start location not being set for ObjCProtocolDecl AST (when a forward reference is in scope).
@protocol Buggy;
@protocol Buggy
@optional
- whatever;
@end
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54740 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Kill unnecessary #includes in .cpp files. This is an automatic
sweep so some things removed are actually used, but happen to be
included by a previous header. I tried to get rid of the obvious
examples and this was the easiest way to trim the #includes in one
fell swoop.
- We now return to regularly scheduled development.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54632 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Drop TokenKinds.h from Action.h
- Move DeclSpec.h from Sema.h into individual Sema .cpp files
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54625 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54114 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ASTContext::getCanonicalType instead (PR2189)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54105 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54101 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
last client of the old ParseObjCProtocolReferences, so it also removes it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54094 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54093 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This temporarily duplicates ParseObjCProtocolReferences, but it
will be removed in the future.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54092 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54091 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54090 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@54032 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of a specific smallvector size.
Fix protocol lists to pass down proper location info, so we get diagnostics
like this:
t.m:3:35: error: cannot find protocol definition for 'NSCopying', referenced by 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
^
instead of this:
t.m:3:44: error: cannot find protocol definition for 'NSCopying', referenced by 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
^
Add a new IdentifierLocPair typedef which is just a pair<IdentifierInfo*, SourceLocation>
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53883 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
simplifying code along the way and fixing a problem and memory leak or two.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53876 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53864 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
References to forward definitions should be warnings.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53863 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
various objc lists over to it. First up, the protocol list
on ObjCInterfaceDecl.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53856 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
be consistent with ObjCInterfaceDecl.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53852 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53849 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the standard "set these as the list of protocols" interface instead of a
strange "set this as the size and then set each one to the value" interface.
The problem with the later is that it a) is completely different from
everything else, b) is awkward, and c) doesn't handle the case when a
referenced protocol is invalid: it set it to null.
This meant that all clients downstream would have to handle null protocols
in the protocol list, and empirically they didn't. Fix this by not setting
invalid protocols in the referenced protocol list, fixing the crash on
test/Sema/objc-interface-1.m
While I'm at it, clean up some locations so that we produce:
t.m:1:25: error: cannot find interface declaration for 'NSObject', superclass of 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
~~~~~~~~~~~~~~~~~~~~~ ^
instead of:
t.m:1:1: error: cannot find interface declaration for 'NSObject', superclass of 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
^
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@53846 91177308-0d34-0410-b5e6-96231b3b80d8
|