Age | Commit message (Collapse) | Author |
|
that every declaration lives inside a DeclContext.
Moved several things that don't have names but were ScopedDecls (and,
therefore, NamedDecls) to inherit from Decl rather than NamedDecl,
including ObjCImplementationDecl and LinkageSpecDecl. Now, we don't
store empty DeclarationNames for these things, nor do we try to insert
them into DeclContext's lookup structure.
The serialization tests are temporarily disabled. We'll re-enable them
once we've sorted out the remaining ownership/serialiazation issues
between DeclContexts and TranslationUnion, DeclGroups, etc.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62562 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
new DiagnoseIncompleteType. It provides additional information about
struct/class/union/enum types when possible, either by pointing to the
forward declaration of that type or by pointing to the definition (if
we're in the process of defining that type).
Fixes <rdar://problem/6500531>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62521 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This change refactors and cleans up our handling of name lookup with
LookupDecl. There are several aspects to this refactoring:
- The criteria for name lookup is now encapsulated into the class
LookupCriteria, which replaces the hideous set of boolean values
that LookupDecl currently has.
- The results of name lookup are returned in a new class
LookupResult, which can lazily build OverloadedFunctionDecls for
overloaded function sets (and, eventually, eliminate the need to
allocate member for OverloadedFunctionDecls) and contains a
placeholder for handling ambiguous name lookup (for C++).
- The primary entry points for name lookup are now LookupName (for
unqualified name lookup) and LookupQualifiedName (for qualified
name lookup). There is also a convenience function
LookupParsedName that handles qualified/unqualified name lookup
when given a scope specifier. Together, these routines are meant
to gradually replace the kludgy LookupDecl, but this won't happen
until after we have base class lookup (which forces us to cope
with ambiguities).
- Documented the heck out of name lookup. Experimenting a little
with using Doxygen's member groups to make some sense of the Sema
class. Feedback welcome!
- Fixes some lingering issues with name lookup for
nested-name-specifiers, which now goes through
LookupName/LookupQualifiedName.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62245 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Small cleanup in the handling of user-defined conversions.
Also, implement an optimization when constructing a call. We avoid
recomputing implicit conversion sequences and instead use those
conversion sequences that we computed as part of overload resolution.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62231 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to allocate the array of ParmVarDecl*'s.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62203 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62122 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62012 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@62003 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
introduce a Scope for the body of a tag. This reduces the number of
semantic differences between C and C++ structs and unions, and will
help with other features (e.g., anonymous unions) in C. Some important
points:
- Fields are now in the "member" namespace (IDNS_Member), to keep
them separate from tags and ordinary names in C. See the new test
in Sema/member-reference.c for an example of why this matters. In
C++, ordinary and member name lookup will find members in both the
ordinary and member namespace, so the difference between
IDNS_Member and IDNS_Ordinary is erased by Sema::LookupDecl (but
only in C++!).
- We always introduce a Scope and push a DeclContext when we're
defining a tag, in both C and C++. Previously, we had different
actions and different Scope/CurContext behavior for enums, C
structs/unions, and C++ structs/unions/classes. Now, it's one pair
of actions. (Yay!)
There's still some fuzziness in the handling of struct/union/enum
definitions within other struct/union/enum definitions in C. We'll
need to do some more cleanup to eliminate some reliance on CurContext
before we can solve this issue for real. What we want is for something
like this:
struct X {
struct T { int x; } t;
};
to introduce T into translation unit scope (placing it at the
appropriate point in the IdentifierResolver chain, too), but it should
still have struct X as its lexical declaration
context. PushOnScopeChains isn't smart enough to do that yet, though,
so there's a FIXME test in nested-redef.c
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61940 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- ObjCContainerDecl's (ObjCInterfaceDecl/ObjCCategoryDecl/ObjCProtocolDecl), ObjCCategoryImpl, & ObjCImplementation are all DeclContexts.
- ObjCMethodDecl is now a ScopedDecl (so it can play nicely with DeclContext).
- ObjCContainerDecl now does iteration/lookup using DeclContext infrastructure (no more linear search:-)
- Removed ASTContext argument to DeclContext::lookup(). It wasn't being used and complicated it's use from an ObjC AST perspective.
- Added Sema::ProcessPropertyDecl() and removed Sema::diagnosePropertySetterGetterMismatch().
- Simplified Sema::ActOnAtEnd() considerably. Still more work to do.
- Fixed an incorrect casting assumption in Sema::getCurFunctionOrMethodDecl(), now that ObjCMethodDecl is a ScopedDecl.
- Removed addPropertyMethods from ObjCInterfaceDecl/ObjCCategoryDecl/ObjCProtocolDecl.
This passes all the tests on my machine. Since many of the changes are central to the way ObjC finds it's methods, I expect some fallout (and there are still a handful of FIXME's). Nevertheless, this should be a step in the right direction.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61929 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Duplicate-member checking within classes is still a little messy, and
anonymous unions are still completely broken in C. We'll need to unify
the handling of fields in C and C++ to make this code applicable in
both languages.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61878 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
an if.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61800 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Make C++ classes track the POD property (C++ [class]p4)
Track the existence of a copy assignment operator.
Implicitly declare the copy assignment operator if none is provided.
Implement most of the parsing job for the G++ type traits extension.
Fully implement the low-hanging fruit of the type traits:
__is_pod: Whether a type is a POD.
__is_class: Whether a type is a (non-union) class.
__is_union: Whether a type is a union.
__is_enum: Whether a type is an enum.
__is_polymorphic: Whether a type is polymorphic (C++ [class.virtual]p1).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61746 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
DeclContexts whose members are visible from enclosing DeclContexts up
to (and including) the innermost enclosing non-transparent
DeclContexts. Transparent DeclContexts unify the mechanism to be used
for various language features, including C enumerations, anonymous
unions, C++0x inline namespaces, and C++ linkage
specifications. Please refer to the documentation in the Clang
internals manual for more information.
Only enumerations and linkage specifications currently use transparent
DeclContexts.
Still to do: use transparent DeclContexts to implement anonymous
unions and GCC's anonymous structs extension, and, later, the C++0x
features. We also need to tighten up the DeclContext/ScopedDecl link
to ensure that every ScopedDecl is in a single DeclContext, which
will ensure that we can then enforce ownership and reduce the memory
footprint of DeclContext.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61735 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61486 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
operators
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
semantics and improve our handling of default arguments. Specifically,
we follow this order:
- As soon as the see the '}' in the class definition, the class is
complete and we add any implicit declarations (default constructor,
copy constructor, etc.) to the class.
- If there are any default function arguments, parse them
- If there were any inline member function definitions, parse them
As part of this change, we now keep track of the the fact that we've
seen unparsed default function arguments within the AST. See the new
ParmVarDecl::hasUnparsedDefaultArg member. This allows us to properly
cope with calls inside default function arguments to other functions
where we're making use of the default arguments.
Made some C++ error messages regarding failed initializations more
specific.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61406 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
DeclContext. Instead, just keep the list of currently-active
declarations and only build the OverloadedFunctionDecl when we
absolutely need it.
This is a half-step toward eliminating the need to explicitly build
OverloadedFunctionDecls that store sets of overloaded
functions. This was suggested by Argiris a while back, and it's a good
thing for several reasons: first, it eliminates the messy logic that
currently tries to keep the OverloadedFunctionDecl in sync with the
declarations that are being added. Second, it will (eventually)
eliminate the need to allocate memory for overload sets, which could
help performance. Finally, it helps set us up for when name lookup can
return multiple (possibly ambiguous) results, as can happen with
lookup of class members in C++.
Next steps: make the IdentifierResolver store overloads as separate
entries in its list rather than replacing them with an
OverloadedFunctionDecl now, then see how far we can go toward
eliminating OverloadedFunctionDecl entirely.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61357 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61346 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61337 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
warning. This matches GCC's behavior and addresses
<rdar://problem/6458293>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61246 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
class itself, with a different scope. This eliminates some ownership issues, so that the RecordDecl only lives in a single context
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61140 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Move Sema::ActOnDefs to SemaDeclObjC
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61126 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61125 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is completely defined (C++ [class.mem]p2).
Reverse the order in which we process the definitions of member
functions specified inline. This way, we'll get diagnostics in the
order in which the member functions were declared in the class.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61103 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
just like all other members, and remove the special variables in
CXXRecordDecl to store them. This eliminates a lot of special-case
code for constructors and destructors, including
ActOnConstructor/ActOnDeclarator and special lookup rules in
LookupDecl. The result is far more uniform and manageable.
Diagnose the redeclaration of member functions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61048 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
half-solution; the real solution is coming when constructors and
destructors are treated like all other functions by ActOnDeclarator.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@61037 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Convert a few functions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@60983 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@60947 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@60897 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and separates lexical name lookup from qualified name lookup. In
particular:
* Make DeclContext the central data structure for storing and
looking up declarations within existing declarations, e.g., members
of structs/unions/classes, enumerators in C++0x enums, members of
C++ namespaces, and (later) members of Objective-C
interfaces/implementations. DeclContext uses a lazily-constructed
data structure optimized for fast lookup (array for small contexts,
hash table for larger contexts).
* Implement C++ qualified name lookup in terms of lookup into
DeclContext.
* Implement C++ unqualified name lookup in terms of
qualified+unqualified name lookup (since unqualified lookup is not
purely lexical in C++!)
* Limit the use of the chains of declarations stored in
IdentifierInfo to those names declared lexically.
* Eliminate CXXFieldDecl, collapsing its behavior into
FieldDecl. (FieldDecl is now a ScopedDecl).
* Make RecordDecl into a DeclContext and eliminates its
Members/NumMembers fields (since one can just iterate through the
DeclContext to get the fields).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@60878 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@60626 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instead of converting them to strings first. This also fixes a
bunch of minor inconsistencies in the diagnostics emitted by clang
and adds a bunch of FIXME's to DiagnosticKinds.def.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59948 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
uses of getName() with uses of getDeclName(). This upgrades a bunch of
diags to take DeclNames instead of std::strings.
This also tweaks a couple of diagnostics to be cleaner and changes
CheckInitializerTypes/PerformInitializationByConstructor to pass
around DeclarationNames instead of std::strings.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59947 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"previously defined here" diagnostics all notes.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59920 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with implicit quotes around them. This has a bunch of follow-on
effects and requires tweaking to a whole lot of code. This causes
a regression in two tests (xfailed) by causing it to emit things like:
Line 10: duplicate interface declaration for category 'MyClass1' ('Category1')
instead of:
Line 10: duplicate interface declaration for category 'MyClass1(Category1)'
I will fix this in a follow-up commit.
As part of this, I had to start switching stuff to use ->getDeclName() instead
of Decl::getName() for consistency. This is good, but I was planning to do this
as an independent patch. There will be several follow-on patches
to clean up some of the mess, but this patch is already too big.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59917 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in the overload diagnostics.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59871 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59805 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
strings. This allows us to have considerable flexibility in how
these things are displayed and provides extra information that
allows us to merge away diagnostics that are very similar.
Diagnostic modifiers are a string of characters with the regex
[-a-z]+ that occur between the % and digit. They may
optionally have an argument that can parameterize them.
For now, I've added two example modifiers. One is a very useful
tool that allows you to factor commonality across diagnostics
that need single words or phrases combined. Basically you can
use %select{a|b|c}4 with with an integer argument that selects
either a/b/c based on an integer value in the range [0..3).
The second modifier is also an integer modifier, aimed to help
English diagnostics handle plurality. "%s3" prints to 's' if
integer argument #3 is not 1, otherwise it prints to nothing.
I'm fully aware that 's' is an English concept and doesn't
apply to all situations (mouse vs mice). However, this is very
useful and we can add other crazy modifiers once we add support
for polish! ;-)
I converted a couple C++ diagnostics over to use this as an
example, I'd appreciate it if others could merge the other
likely candiates. If you have other modifiers that you want,
lets talk on cfe-dev.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59803 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59789 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59714 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59713 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
strings
first. This should allow removal of a bunch of II->getName() calls.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59601 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59600 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59589 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
__builtin_prefetch code to only emit one diagnostic per builtin_prefetch.
While this has nothing to do with the rest of the patch, the code seemed
like overkill when I was updating it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59588 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59561 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59470 91177308-0d34-0410-b5e6-96231b3b80d8
|