Age | Commit message (Collapse) | Author |
|
uses of getName() with uses of getDeclName(). This upgrades a bunch of
diags to take DeclNames instead of std::strings.
This also tweaks a couple of diagnostics to be cleaner and changes
CheckInitializerTypes/PerformInitializationByConstructor to pass
around DeclarationNames instead of std::strings.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59947 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
"previously defined here" diagnostics all notes.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59920 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with implicit quotes around them. This has a bunch of follow-on
effects and requires tweaking to a whole lot of code. This causes
a regression in two tests (xfailed) by causing it to emit things like:
Line 10: duplicate interface declaration for category 'MyClass1' ('Category1')
instead of:
Line 10: duplicate interface declaration for category 'MyClass1(Category1)'
I will fix this in a follow-up commit.
As part of this, I had to start switching stuff to use ->getDeclName() instead
of Decl::getName() for consistency. This is good, but I was planning to do this
as an independent patch. There will be several follow-on patches
to clean up some of the mess, but this patch is already too big.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59917 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
without calling getAsString(). This implicitly puts quotes around the
name, so diagnostics need to be tweaked to accommodate this.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59916 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59881 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59822 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59714 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59713 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
looking up the "std" identifier is trivial. Just do it, particularly
since this is only done if the namespace hasn't already been looked up.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59710 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
used in one cold place.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59709 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
struct A {
struct B;
};
struct A::B {
void m() {} // Assertion failed: getContainingDC(DC) == CurContext && "The next DeclContext should be lexically contained in the current one."
};
Introduce DeclContext::getLexicalParent which may be different from DeclContext::getParent when nested-names are involved, e.g:
namespace A {
struct S;
}
struct A::S {}; // getParent() == namespace 'A'
// getLexicalParent() == translation unit
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59650 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PragmaPackStack. Thanks Chris!
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59616 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59600 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59589 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
__builtin_prefetch code to only emit one diagnostic per builtin_prefetch.
While this has nothing to do with the rest of the patch, the code seemed
like overkill when I was updating it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59588 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59561 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
operator+, directly, using the same mechanism as all other special
names.
Removed the "special" identifiers for the overloaded operators from
the identifier table and IdentifierInfo data structure. IdentifierInfo
is back to representing only real identifiers.
Added a new Action, ActOnOperatorFunctionIdExpr, that builds an
expression from an parsed operator-function-id (e.g., "operator
+"). ActOnIdentifierExpr used to do this job, but
operator-function-ids are no longer represented by IdentifierInfo's.
Extended Declarator to store overloaded operator names.
Sema::GetNameForDeclarator now knows how to turn the operator
name into a DeclarationName for the overloaded operator.
Except for (perhaps) consolidating the functionality of
ActOnIdentifier, ActOnOperatorFunctionIdExpr, and
ActOnConversionFunctionExpr into a common routine that builds an
appropriate DeclRefExpr by looking up a DeclarationName, all of the
work on normalizing declaration names should be complete with this
commit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59526 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59470 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
destructors, and conversion functions. The placeholders were used to
work around the fact that the parser and some of Sema really wanted
declarators to have simple identifiers; now, the code that deals with
declarators will use DeclarationNames.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59469 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
C++ constructors, destructors, and conversion functions now have a
FETokenInfo field that IdentifierResolver can access, so that these
special names are handled just like ordinary identifiers. A few other
Sema routines now use DeclarationNames instead of IdentifierInfo*'s.
To validate this design, this code also implements parsing and
semantic analysis for id-expressions that name conversion functions,
e.g.,
return operator bool();
The new parser action ActOnConversionFunctionExpr takes the result of
parsing "operator type-id" and turning it into an expression, using
the IdentifierResolver with the DeclarationName of the conversion
function. ActOnDeclarator pushes those conversion function names into
scope so that the IdentifierResolver can find them, of course.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59462 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
representing the names of declarations in the C family of
languages. DeclarationName is used in NamedDecl to store the name of
the declaration (naturally), and ObjCMethodDecl is now a NamedDecl.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59441 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59426 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Doug for the review. Actual effects of mutable to follow.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59331 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
function call created in response to the use of operator syntax that
resolves to an overloaded operator in C++, e.g., "str1 +
str2" that resolves to std::operator+(str1, str2)". We now build a
CXXOperatorCallExpr in C++ when we pick an overloaded operator. (But
only for binary operators, where we actually implement overloading)
I decided *not* to refactor the current CallExpr to make it abstract
(with FunctionCallExpr and CXXOperatorCallExpr as derived
classes). Doing so would allow us to make CXXOperatorCallExpr a little
bit smaller, at the cost of making the argument and callee accessors
virtual. We won't know if this is going to be a win until we can parse
lots of C++ code to determine how much memory we'll save by making
this change vs. the performance penalty due to the extra virtual
calls.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59306 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59255 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
conversion functions. Instead, we just use a placeholder identifier
for these (e.g., "<constructor>") and override NamedDecl::getName() to
provide a human-readable name.
This is one potential solution to the problem; another solution would
be to replace the use of IdentifierInfo* in NamedDecl with a different
class that deals with identifiers better. I'm also prototyping that to
see how it compares, but this commit is better than what we had
previously.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59193 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59167 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59163 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59157 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
adding a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59156 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functions for built-in operators, e.g., the builtin
bool operator==(int const*, int const*)
can be used for the expression "x1 == x2" given:
struct X {
operator int const*();
} x1, x2;
The scheme for handling these built-in operators is relatively simple:
for each candidate required by the standard, create a special kind of
candidate function for the built-in. If overload resolution picks the
built-in operator, we perform the appropriate conversions on the
arguments and then let the normal built-in operator take care of it.
There may be some optimization opportunity left: if we can reduce the
number of built-in operator overloads we generate, overload resolution
for these cases will go faster. However, one must be careful when
doing this: GCC generates too few operator overloads in our little
test program, and fails to compile it because none of the overloads it
generates match.
Note that we only support operator overload for non-member binary
operators at the moment. The other operators will follow.
As part of this change, ImplicitCastExpr can now be an lvalue.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59148 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
expressions, both of values and types.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59057 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59042 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@59027 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ScopedDecl::getDeclContext() when there are nested-names.
e.g.:
namespace A {
void f(); // SemanticDC (getDeclContext) == LexicalDC (getLexicalDeclContext) == 'namespace A'
}
void A::f(); // SemanticDC == namespace 'A'
// LexicalDC == global namespace
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58948 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
context of the nested-name ('foo::').
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58945 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-Use more of the non nested-name code path.
-Also use the ActOnTagStruct code path.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58944 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58916 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Parser side.
No Sema functionality change, just the signatures of the Action/Sema methods.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58913 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-When parsing declarators, don't depend on "CurScope->isCXXClassScope() == true" for constructors/destructors
-For C++ member declarations, don't depend on "Declarator.getContext() == Declarator::MemberContext"
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58866 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functions in C++, e.g.,
struct X {
operator bool() const;
};
Note that these conversions don't actually do anything, since we don't
yet have the ability to use them for implicit or explicit conversions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58860 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
void f() {
int +; // crash here
}
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58846 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
operators in C++. Overloaded operators can be called directly via
their operator-function-ids, e.g., "operator+(foo, bar)", but we don't
yet implement the semantics of operator overloading to handle, e.g.,
"foo + bar".
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58817 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Implicit declaration of destructors (when necessary).
Extended Declarator to store information about parsed constructors
and destructors; this will be extended to deal with declarators that
name overloaded operators (e.g., "operator +") and user-defined
conversion operators (e.g., "operator int").
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58767 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
initialization of non-aggregates with initializer lists.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58757 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
duplication in the handling of copy-initialization by constructor,
which occurs both for initialization of a declaration and for
overloading. The initialization code is due for some refactoring.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58756 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
X x(5, 7);
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58641 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Notes:
- Constructors are never found by name lookup, so they'll never get
pushed into any scope. Instead, they are stored as an
OverloadedFunctionDecl in CXXRecordDecl for easy overloading.
- There's a new action isCurrentClassName that determines whether an
identifier is the name of the innermost class currently being defined;
we use this to identify the declarator-id grammar rule that refers to
a type-name.
- MinimalAction does *not* support parsing constructors.
- We now handle virtual and explicit function specifiers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@58499 91177308-0d34-0410-b5e6-96231b3b80d8
|