| Age | Commit message (Collapse) | Author |
|---|
|
and the global module index.
The global module index was querying the file manager for each of the
module files it knows about at load time, to prune out any out-of-date
information. The file manager would then cache the results of the
stat() falls used to find that module file.
Later, the same translation unit could end up trying to import one of the
module files that had previously been ignored by the module cache, but
after some other Clang instance rebuilt the module file to bring it
up-to-date. The stale stat() results in the file manager would
trigger a second rebuild of the already-up-to-date module, causing
failures down the line.
The global module index now lazily resolves its module file references
to actual AST reader module files only after the module file has been
loaded, eliminating the stat-caching race. Moreover, the AST reader
can communicate to its caller that a module file is missing (rather
than simply being out-of-date), allowing us to simplify the
module-loading logic and allowing the compiler to recover if a
dependent module file ends up getting deleted.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@177367 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Issue reported by Tom Honermann!
http://llvm.org/bugs/show_bug.cgi?id=15377
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@177336 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Richard S. for pointing out that the warning would show up
with -Weverything.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@177218 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The test would overflow when computing '0 - 1'.
I don't have a good testcase for this that does not depend on system headers.
It did not trigger with preprocessed output, and I had trouble reducing the example.
Fixes <rdar://problem/13324594>.
Thanks to Michael Greiner for reporting this issue.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@177201 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@177004 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This allows resolving top-header filenames of modules to FileEntries when
we need them, not eagerly.
Note that that this breaks ABI for libclang functions
clang_Module_getTopLevelHeader / clang_Module_getNumTopLevelHeaders
but this is fine because they are experimental and not widely used yet.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176975 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
string to be emitted, and two properties about the files themselves.
Use $PWD to absolut-ify the path to the coverage file. Yes, this is what GCC
does. Reverts my own r175706.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176617 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176544 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch is designed for minimal intrusion into normal preprocessing
and compilation; under -E -traditional-cpp, the lexer will still
generate tok::comment nodes since it is preserving all whitespace, but
the output printer will then throw it away.
<rdar://problem/13338680>
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176534 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When both Triple and -mabi are used, it may result into conflicting ABI value.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176531 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
print out the filename.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@176511 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
available the
full information about the macro (e.g if it was imported and where).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175978 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Move the cold virtual method getNameForDiagnostic out of line.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175966 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and through to the debug info in the module. In order to make the
testcase a bit more efficient allow the filename to go through
compilation for compile and not assemble jobs and turn off the
extract for cases where we don't create an object.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175935 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
commands
Add an ability to specify custom documentation block comment commands via a new
class CommentOptions. The intention is that this class will hold future
customizations for comment parsing, including defining documentation comments
with specific numbers of parameters, etc.
CommentOptions instance is a member of LangOptions.
CommentOptions is controlled by a new command-line parameter
-fcomment-block-commands=Foo,Bar,Baz.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175892 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to control the check for the C 5.2.4.1 / C++ [implimits] restriction on nesting
levels for parentheses, brackets and braces.
Some code with heavy macro use exceeds the default limit of 256, but we don't
want to increase it generally to avoid stack overflow on stack-constrained
systems.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175855 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Along the way, improve a diagnostic for "previous declaration here" for implicit parameters.
Fixes <rdar://problem/13211384>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175802 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Note that unlike GNU cpp we currently do not preserve whitespace in macros
(even in -traditional-cpp mode).
<rdar://problem/12897179>
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175778 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
MacroInfo class
for the data specific to a macro definition (e.g. what the tokens are), and
MacroDirective class which encapsulates the changes to the "macro namespace"
(e.g. the location where the macro name became active, the location where it was undefined, etc.)
(A MacroDirective always points to a MacroInfo object.)
Usually a macro definition (MacroInfo) is where a macro name becomes active (MacroDirective) but
splitting the concepts allows us to better model the effect of modules to the macro namespace
(also as a bonus it allows better modeling of push_macro/pop_macro #pragmas).
Modules can have their own macro history, separate from the local (current translation unit)
macro history; MacroDirectives will be used to model the macro history (changes to macro namespace).
For example, if "@import A;" imports macro FOO, there will be a new local MacroDirective created
to indicate that "FOO" became active at the import location. Module "A" itself will contain another
MacroDirective in its macro history (at the point of the definition of FOO) and both MacroDirectives
will point to the same MacroInfo object.
Introducing the separation of macro concepts is the first part towards better modeling of module macros.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175585 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We treat this as an alternative to -fvisibility=<?>
which changes the default value visibility to "hidden"
and the default type visibility to "default".
Expose a -cc1 option for changing the default type
visibility, repurposing -fvisibility as the default
value visibility option (also setting type visibility
from it in the absence of a specific option).
rdar://13079314
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@175480 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Nearly all of these changes are one-to-one replacements; the few that
aren't have to do with custom identifier validation.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174768 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174744 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
consistency.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174645 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
if it found any decls, rather than returning a list of found decls. This
removes a returning-ArrayRef-to-deleted-storage bug from
MultiplexExternalSemaSource (in code not exercised by any of the clang
binaries), reduces the work required in the found-no-decls case with PCH, and
importantly removes the need for DeclContext::lookup to be reentrant.
No functionality change intended!
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174576 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
everything after the second '=' if it is there.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174567 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
modules.
The use of this flag enables a modules optimization where a given set
of macros can be labeled as "ignored" by the modules
system. Definitions of those macros will be completely ignored when
building the module hash and will be stripped when actually building
modules. The overall effect is that this flag can be used to
drastically reduce the number of
Eventually, we'll want modules to tell us what set of macros they
respond to (the "configuration macros"), and anything not in that set
will be excluded. However, that requires a lot of per-module
information that must be accurate, whereas this option can be used
more readily.
Fixes the rest of <rdar://problem/13165109>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174560 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This can happen when one abuses precompiled headers by passing more -D
options when using a precompiled hedaer than when it was built. This
is intentionally permitted by precompiled headers (and is exploited by
some build environments), but causes problems for modules.
First part of <rdar://problem/13165109>, detecting when something when
horribly wrong.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174554 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
preprocessor options;
since only one of them is allowed in command-line, process them separately.
Otherwise, if more than one is specified in the command-line, one is processed normally
and the others are going to be treated and included as header files.
Related to radar://13140508
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174385 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
[-Wsign-compare]
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174353 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
module import occurred.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@174191 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks, Sean.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173981 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Specifically, don't print snippets, caret diagnostics, or ranges for
lines over 4096 characters. We copy the line around a few times in our
diagnostics machinery, and we have to print a caret line that's just as
long. This uses a lot of memory just to create a poor user experience as
we print out a line much too long for anyone to read...or spend extra
energy trying to fit it to -fmessage-length.
<rdar://problem/13106850>
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173976 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Redefine the shallow mode to inline all functions for which we have a
definite definition (ipa=inlining). However, only inline functions that
are up to 4 basic blocks large and cut the max exploded nodes generated
per top level function in half.
This makes shallow faster and allows us to keep inlining small
functions. For example, we would keep inlining wrapper functions and
constructors/destructors.
With the new shallow, it takes 104s to analyze sqlite3, whereas
the deep mode is 658s and previous shallow is 209s.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173958 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173957 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is required to use them in TableGen.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173924 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
People use the C preprocessor for things other than C files. Some of them
have Unicode characters. We shouldn't warn about Unicode characters
appearing outside of identifiers in this case.
There's not currently a way for the preprocessor to tell if it's in -E mode,
so I added a new flag, derived from the PreprocessorOutputOptions. This is
only used by the Unicode warnings for now, but could conceivably be used by
other warnings or even behavioral differences later.
<rdar://problem/13107323>
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173881 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173871 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173866 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- The only group where it makes sense for the "ExternC" bit is System, so this
simplifies having to have the extra isCXXAware (or ImplicitExternC, depending
on what code you talk to) bit caried around.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173859 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- This slightly decouples the path handling, since before the group sometimes
dominated the "use sysroot" bit, but it was still passed in via the API.
- No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173855 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173854 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173853 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
implementation; this is much more inline with the original implementation
(i.e., pre-ubsan) and does not require run-time library support.
The trapping implementation can be invoked using either '-fcatch-undefined-behavior'
or '-fsanitize=undefined-trap -fsanitize-undefined-trap-on-error', with the latter
being preferred. Eventually, the -fcatch-undefined-behavior' flag will be removed.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173848 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-fno-modules-global-index -cc1 option to allow one to disable the
index for performance testing purposes, but with a 10% win in
-fsyntax-only time, there is no reason a user would do this.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173707 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The -E output from clang did not produce the correct indentation on the first line.
This is because MoveToLine returned false, and when this happens,
the regular process for producing initial indentation is skipped.
Thanks to Eli for suggesting a way to simplify this to a one-line change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173657 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173412 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173411 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
GCC docs.
- Found by inspection.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173410 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173409 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
AST reader.
The global module index tracks all of the identifiers known to a set
of module files. Lookup of those identifiers looks first in the global
module index, which returns the set of module files in which that
identifier can be found. The AST reader only needs to look into those
module files and any module files not known to the global index (e.g.,
because they were (re)built after the global index), reducing the
number of on-disk hash tables to visit. For an example source I'm
looking at, we go from 237844 total identifier lookups into on-disk
hash tables down to 126817.
Unfortunately, this does not translate into a performance advantage.
At best, it's a wash once the global module index has been built, but
that's ignore the cost of building the global module index (which
is itself fairly large). Profiles show that the global module index
code is far less efficient than it should be; optimizing it might give
enough of an advantage to justify its continued inclusion.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173405 91177308-0d34-0410-b5e6-96231b3b80d8
|
