Age | Commit message (Collapse) | Author |
|
Remove ASTContext parameter from DeclContext's methods. This change cascaded down to other Decl's methods and changes to call sites started "escalating".
Timings using pre-tokenized "cocoa.h" showed only a ~1% increase in time run between and after this commit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@74506 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is simple enough, but then I thought it would be nice to make PrintingPolicy
get a LangOptions so that various things can key off "bool" and "C++" independently.
This spiraled out of control. There are many fixme's, but I think things are slightly
better than they were before.
One thing that can be improved: CFG should probably have an ASTContext pointer in it,
which would simplify its clients.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@74493 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@74304 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@74099 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
representation.
Add a type (ObjCObjectPointerType) and remove a type (ObjCQualifiedIdType).
This large/tedious patch is just a first step. Next step is to remove ObjCQualifiedInterfaceType. After that, I will remove the magic TypedefType for 'id' (installed by Sema). This work will enable various simplifications throughout clang (when dealing with ObjC types).
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@73649 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
info. To handle this edge case, always create main compile unit first.
This fixes PR 4228.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@73520 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
printing logic to help customize the output. For now, we use this
rather than a special flag to suppress the "struct" when printing
"struct X" and to print the Boolean type as "bool" in C++ but "_Bool"
in C.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@72590 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Just SmallVectors this time.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@72432 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@72210 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
interface types.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@72036 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@71763 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
emit the correct "display name". I suspect we need more work here, see
FIXME for example.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@71761 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
debug info.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@71736 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
types. In this case, it was objc_selector and objc_class. This fixes
rdar://6852754 - clang sometimes generates incorrect/unknown file/line info for DW_TAG__structure_type dies
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70969 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
DIEs. We were generating a loc with line of 0 and a file.
These tags do not need locations at all, just remove it.
this fixes rdar://6852792 - Clang generates incorrect (and unnecessary) file and line info for DW_TAG_inheritance dies
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70966 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in ObjC) to not emit file/line location information. Previously
we would output a file with bogus line information. This fixes:
rdar://6852814 - Clang generates incorrect file & line info for automatic/understood formal parameters for objc-programs
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70965 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70825 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the runtime version number onto it, so that the debugger knows it's an objc
interface, not a C struct. rdar://6848435
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70618 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70617 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
rdar://6848435,
several other fixes coming.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70616 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70266 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@70145 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
preprocessed source file without -main-file-name. In this case, CDDebugInfo is not able identify correct main source file becase SM.isFromMainFile() returns true for locations from header files as well as locations from main source file.
This patch takes conservative approach by not emitting more then one compile unit with isMain bit set.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69902 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69873 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69784 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69783 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69517 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69389 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@69387 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
No functionality change (really).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@68726 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@68630 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- This is pretty ugly, but the most obvious solution. Chime in if you
have a nicer one.
- The problem is that with -save-temps, clang-cc has no idea what the
name of the original input file is. However, the user expects to be
able to set breakpoints based on the input file name.
- We support this by providing a new option -main-file-name (similar
to -dumpbase used by gcc) which allows the driver to pass in the
original file name.
- <rdar://problem/6753383> building with clang using --save-temps
gets the compile unit name from the .i file...
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@68595 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
types. It is no longer needed now that the code generator
re-lays-out interfaces if they are defines after being laid out
from a forward decl.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@68194 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
representation handles the various ways in which one can name a
template, including unqualified references ("vector"), qualified
references ("std::vector"), and dependent template names
("MetaFun::template apply").
One immediate effect of this change is that the representation of
nested-name-specifiers in type names for class template
specializations (e.g., std::vector<int>) is more accurate. Rather than
representing std::vector<int> as
std::(vector<int>)
we represent it as
(std::vector)<int>
which more closely follows the C++ grammar.
Additionally, templates are no longer represented as declarations
(DeclPtrTy) in Parse-Sema interactions. Instead, I've introduced a new
OpaquePtr type (TemplateTy) that holds the representation of a
TemplateName. This will simplify the handling of dependent
template-names, once we get there.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@68074 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The llvm optimizer and code generator are not yet ready to support optimized code debugging.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67876 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67674 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67650 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67389 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67267 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
qualified name, e.g.,
foo::x
so that we retain the nested-name-specifier as written in the source
code and can reproduce that qualified name when printing the types
back (e.g., in diagnostics). This is PR3493, which won't be complete
until finished the other tasks mentioned near the end of this commit.
The parser's representation of nested-name-specifiers, CXXScopeSpec,
is now a bit fatter, because it needs to contain the scopes that
precede each '::' and keep track of whether the global scoping
operator '::' was at the beginning. For example, we need to keep track
of the leading '::', 'foo', and 'bar' in
::foo::bar::x
The Action's CXXScopeTy * is no longer a DeclContext *. It's now the
opaque version of the new NestedNameSpecifier, which contains a single
component of a nested-name-specifier (either a DeclContext * or a Type
*, bitmangled).
The new sugar type QualifiedNameType composes a sequence of
NestedNameSpecifiers with a representation of the type we're actually
referring to. At present, we only build QualifiedNameType nodes within
Sema::getTypeName. This will be extended to other type-constructing
actions (e.g., ActOnClassTemplateId).
Also on the way: QualifiedDeclRefExprs will also store a sequence of
NestedNameSpecifiers, so that we can print out the property
nested-name-specifier. I expect to also use this for handling
dependent names like Fibonacci<I - 1>::value.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67265 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67062 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unclear areas. Maybe Doug can shed some light on some of the fixmes.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@67059 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@66580 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@66120 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65850 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65671 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65659 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
giving them rough classifications (normal types, never-canonical
types, always-dependent types, abstract type representations) and
making it far easier to make sure that we've hit all of the cases when
decoding types.
Switched some switch() statements on the type class over to using this
mechanism, and filtering out those things we don't care about. For
example, CodeGen should never see always-dependent or non-canonical
types, while debug info generation should never see always-dependent
types. More switch() statements on the type class need to be moved
over to using this approach, so that we'll get warnings when we add a
new type then fail to account for it somewhere in the compiler.
As part of this, some types have been renamed:
TypeOfExpr -> TypeOfExprType
FunctionTypeProto -> FunctionProtoType
FunctionTypeNoProto -> FunctionNoProtoType
There shouldn't be any functionality change...
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65591 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(This is not yet used.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65573 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@65423 91177308-0d34-0410-b5e6-96231b3b80d8
|