Age | Commit message (Collapse) | Author |
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141133 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141131 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
was assembly. Otherwise, something like -save-temps causes the integrated
assembler to warn.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141127 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
There should be a better solution to this; Michael and I are continuing
to discuss exactly what it should be. The one solution I'm very
uncomfortable with is making the FileCheck tests use a regex for each
path separator.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141126 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
installations, support them when installed directly under the system
root ('/lib/gcc/...' essentially).
With this, Clang can correctly detect and use a cross-compiling GCC
installation within a system root and use it.
Again, test cases will be coming in later commits, as I'm going to write
a few test cases that exercise nearly all of this logic.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141121 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
two fundamental changes, as they ended up being interrelated.
The first is to walk from the root down through the filesystem so that
we prune subtrees which do not exist early. This greatly reduces the
filesystem traffic of this routine. We store the "best" GCC version we
encounter, and look at all of the GCC installations available.
Also, we look through GCC versions by scanning the directory rather than
using a hard-coded list of versions. This has several benefits. It makes
it much more efficient to locate a GCC installation even in the presence
of a large number of different options by simply reading the directory
once. It also future-proofs us as new GCC versions are released and
installed. We no longer have a hard coded list of version numbers, and
won't need to manually updated it. We can still filter out known-bad
versions as needed. Currently I've left in filtering for all GCC
installations prior to 4.1.1, as that was the first one supported
previously.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141120 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the command line options (at least according to GCC's documentation). GCC 4.2
didn't appear to actually do this, but it seems like that has been fixed in
later release, so we will follow the docs.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141119 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
can obtain block count directly from the Context.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141112 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
InitListChecker::getStructuredSubobjectInit which was increasing the reserved size for an init list past its maximum possible size. Fixes PR11056, a case where we were reserving a bunch of memory for arrays that was never actually used.
(No testcase because I don't think we have any way to actually write a testcase for this; the chosen value of NumElements has no effects on anything other than performance and memory usage.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141106 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
continuation class into warning. // rdar://10231514
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141100 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141098 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
<rdar://problem/10230631>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141089 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
<rdar://problem/10230626>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141088 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
<rdar://problem/10226192>.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141087 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141086 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141085 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141078 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reverts commit 5383d065241b18e84232bc50d81523f2058ea62b.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141077 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
GCC installation search that requires fewer filesystem operations.
Planning to implement that next as the current approcah while thorough
(and so far looks correct) does a very unfortunate number of filesystem
operations.
I'm motivated to fix this in no small part because I would like to
support a much larger space of triples and GCC versions, which would
explode the current algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141073 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
find the newest GCC available, among other goodness. It makes the entire
system much less prone to error from prefixes and/or system roots
pruning early the set of triples and GCC versions available.
Also, improve some comments and simplify the forms of some of the loops.
This causes the driver to stat directories more often than is strictly
necessary, but the alternatives which I looked at that still
accomplished this goal needed quite a bit more code and were likely not
much faster.
Test cases for this, now that our behavior here is significantly more
principled and predictable, should come tomorrow as I walk back through
VMs looking for edge cases that are missed after this.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141072 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
significantly cleaner (IMO) and more principled. We now walk down each
layer of the directory hierarchy searching for the GCC install. This
change does in fact introduce a significant behavior change in theory,
although in practice I don't know of any distro that will be impacted by
it negatively, and Debian may (untested) get slightly better through it.
Specifically, the logic now looks exhaustively for patterns such as:
/usr/lib/<triple>/gcc/<triple>
Previously, this would only be selected if there was *also*
a '/usr/lib/gcc/<triple>' directory, or if '<triple>' were the excat
DefaultHostTriple in the driver.
There is a 4-deep nested loop here, but it doesn't do terribly many
filesystem operations, as we skip at each layer of that layer's
directory doesn't exist.
There remains a significant FIXME in this logic: it would be much better
to first build up a set of candidate components for each of the four
layers with a bottom-up pruning such as this, but then select the final
installation using a top-down algorithm in order to find the newest GCC
installation available, regardless of which particular path leads to it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141071 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to id so that we can still optimize them appropriately.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141064 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is old leftover cruft from the days when C++ was not yet ready
for prime time.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141063 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141062 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-Add the location of the class name to all objc container decls, not just ObjCInterfaceDecl.
-Make objc decls consistent with the rest of the NamedDecls and have getLocation() point to the
class name, not the location of '@'.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141061 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141060 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
installations. This first selects a set of prefixes and a set of
compatible triples for the current architecture. Once selected, we drive
the search with a single piece of code.
This code isn't particularly efficient as it stands, but its only
executed once. I'm hoping as I clean up the users of this information,
it will also slowly become both cleaner and more efficient.
This also changes the behavior slightly. Previously, we had an ad-hoc
list of prefixes and triples, and we only looked for some triples
beneath specific prefixes and vice versa. This has led to lots of
one-off patches to support triple X, or support lib dir Y. Even without
going to a fully universal driver, we can do better here. This patch
makes us always look first in either 'lib32' or 'lib64' on 32- or 64-bit
hosts (resp.). However, we *always* look in 'lib'.
Currently I have one lingering problem with this strategy. We might find
a newer or better GCC version under a different (but equally compatible)
triple. Fundamentally, this loop needs to be fused with the one below.
That's my next patch.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141056 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
was assembly. Otherwise, something like -save-temps causes the integrated
assembler to warn.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141055 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
using the integrated assembler.
rdar://10216353
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141053 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
separate thread with the "suitably large" stack, so we don't blow the
stack when building modules recursively.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141051 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
because of invalid passed parameter.
rdar://10210140
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141048 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
BinaryOperator tracked) from IdempotentOperationChecker.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141045 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
functions. // rdar://10186536
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141037 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
an edge/branching. (ExprEngine should be in charge of generating edges. The checkers should examine the condition and generate PostCondition node if needed.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141034 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Remove unused FindUndefExpr::ProgramStateManager.
- The Condition parameter of the callback is the terminator of the block, no need to retrieve it again.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141027 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141018 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141012 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
is designed to allow the detection to record more rich information about
the installation than just a single path.
Mostly, the functionality remains the same. This is primarily
a factoring change. However, the new factoring immediately fixes one
issue where on ubuntu we didn't walk up enough layers to reach the
parent lib path. I'll have a test tree for that once I finish making the
Ubuntu tree work reasonably.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141011 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
not bind to a temporary. Fixes //rdar://10188258
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141009 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141008 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
sync between DiagnosticsEngine and PartialDiagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141006 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141002 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
configuration, although the test still stubs out more directories than
are necessary or common in order to exercise all of the lookup paths
observed with upstream GCC.
This finishes testing the distribution-independent and
GCC-installation-independent parts of the library path search logic.
More testing is still needed for the triple detection, GCC-installation
detection, and handling distributions with unusual configurations.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@141000 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
enabled for debian hosts, which is quite odd. I think all restriction on
when Clang attempts to use a multilib installation should go away. Clang
is fundamentally a cross compiler. It behaves more like GCC when built
as a cross compiler, and so it should just use multilib installs when
they are present on the system. However, there is a very specific
exemption for Exherbo, which I can't test on, so I'm leaving that in
place.
With this, check in a generic test tree for multilib on a 32-bit host.
This stubs out many directories that most distributions don't use but
that uptsream GCC supports. This is intended to be an agnostic test that
the driver behaves properly compared with the GCC driver it aims for
compatibility with.
Also, fix a bug in the driver that this testing exposed (see!) where it
was incorrectly testing the target architecture rather than the host
architecture.
If anyone is having trouble with the tree-structure stubs I'm creating
to test this, let me know and I can revisit the design. I chose this
over (for example) a tar-ball in order to make tests run faster at the
small, hopefully amortized VCS cost.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140999 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
include *any* path on crtbegin.o unless we actually find such a file via
one of the search paths. We still strictly check the search paths right
after this, so we'll catch any issues there.
The reason for this is that the driver does some normalization of the
path on the actual object file, and this changes the textual format of
the string on Windows. It no longer matches the textual format of the
sysroot flag.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140998 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
any distros that use this, building a multilib GCC from mainline will
install linker scripts here.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140996 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This requires fixing a latent bug -- if we used the default host triple
instead of an autodetected triple to locate GCC's installation, we
didn't go back and fix the GCC triple. Correct that with a pile of
hacks. This entire routine needs a major refactoring which I'm saving
for a subsequent commit. Essentially, the detection of the GCC triple
should be hoisted into the same routine as we locate the GCC
installation: the first is intrinsically tied to the latter. Then the
routine will just return the triple and base directory.
Also start to bring the rest of the library search path logic under
test, including locating crtbegin.o. Still need to test the multilib and
other behaviors, but there are also bugs in the way of that.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140995 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is still very much a WIP, but sysroot was completely broken before
this so we are moving closer to correctness.
The crux of this is that 'ld' (on Linux, the only place I'm touching
here) doesn't apply the sysroot to any flags given to it. Instead, the
driver must translate all the paths it adds to the link step with the
system root. This is easily observed by building a GCC that supports
sysroot, and checking its driver output.
This patch just fixes the non-multilib library search paths. We should
also use this in many other places, but first things first.
This also allows us to make the Linux 'ld' test independent of the host
system. This in turn will allow me to check in test tree configurations
based on various different distro's configuration. Again, WIP.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140990 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Instead of always storing all source locations for the selector identifiers
we check whether all the identifiers are in a "standard" position; "standard" position is
-Immediately before the arguments: -(id)first:(int)x second:(int)y;
-With a space between the arguments: -(id)first: (int)x second: (int)y;
-For nullary selectors, immediately before ';': -(void)release;
In such cases we infer the locations instead of storing them.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140989 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@140988 91177308-0d34-0410-b5e6-96231b3b80d8
|