# WARNING

Some v0 and v1 badges fail when plugged in to USB,
the MCU develops a short and destroys itself!

If you have a v0 or v1 badge install a 10uF cap between pins 4 and 8
(VSS and VREGIN) on the BREAKOUT1 header.

![VREGIN capacitor](vregin_cap.jpg?raw=true)

## Getting Started

Instructions for building firmware and flashing your badge is in
[laser-tag software/README](laser-tag software/README).

## Getting Help

Join #ahabadges on Freenode.