Remove VREFH divider

Seems like we have enough resolution in the CMP DAC without it.

2 files changed, 97 insertions, 155 deletions

diff --git a/laser-tag badge/laser-tag.brd b/laser-tag badge/laser-tag.brd
index 1e90d19..89126fd 100644
--- a/laser-tag badge/laser-tag.brd
+++ b/laser-tag badge/laser-tag.brd
@@ -2330,6 +2330,11 @@ www.irf.com<p>
 <smd name="2" x="0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
 <wire x1="-0.254" y1="0" x2="0.254" y2="0" width="0.254" layer="1"/>
 </package>
+<package name="JUMPER_SOLDER_1X2_OPEN">
+<description>Solder jumper 6mil clearance</description>
+<smd name="1" x="-0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
+<smd name="2" x="0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
+</package>
 </packages>
 </library>
 <library name="opto-trans-siemens">
@@ -2582,10 +2587,7 @@ design rules under a new name.</description>
 <element name="S3" library="switch" package="SKHMPXE010" value="SKHMPSE010" x="67.31" y="59.69"/>
 <element name="S4" library="switch" package="SKHMPXE010" value="SKHMPSE010" x="67.31" y="48.26"/>
 <element name="U$1" library="Graphics" package="AHA" value="AHA" x="41.275" y="43.815"/>
-<element name="C14" library="rcl" package="C0603K" value="0.1 uF" x="48.895" y="50.8" rot="R180"/>
 <element name="Q1" library="transistor-small-signal" package="SOT23" value="2N7002ET1G" x="60.96" y="69.85" rot="MR0"/>
-<element name="R5" library="rcl" package="R0603" value="100k" x="48.895" y="48.895"/>
-<element name="R6" library="rcl" package="R0603" value="220k" x="48.895" y="46.99" rot="R180"/>
 <element name="J1" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="49.53" y="64.77"/>
 <element name="J3" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="41.275" y="24.765" rot="R90"/>
 <element name="J6" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="52.705" y="67.31" rot="R90"/>
@@ -2593,7 +2595,6 @@ design rules under a new name.</description>
 <element name="J8" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="49.53" y="67.31" rot="R90"/>
 <element name="J9" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="48.26" y="67.31" rot="R90"/>
 <element name="J10" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="46.355" y="67.31" rot="R90"/>
-<element name="J2" library="Jumpers" package="JUMPER_SOLDER_1X2_CLOSED" value="JUMPER_SOLDER_1X2_CLOSED" x="45.72" y="48.895"/>
 <element name="D1" library="opto-trans-siemens" package="SFH225" value="PDB-C156" x="40.64" y="10.16" rot="R90">
 <attribute name="OC_NEWARK" value="unknown" x="40.64" y="10.16" size="1.778" layer="27" rot="R90" display="off"/>
 <attribute name="MPN" value="" x="40.64" y="10.16" size="1.778" layer="27" rot="R90" display="off"/>
@@ -2606,6 +2607,7 @@ design rules under a new name.</description>
 <attribute name="MF" value="" x="40.64" y="6.985" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="40.64" y="6.985" size="1.778" layer="27" rot="R270" display="off"/>
 </element>
+<element name="J2" library="Jumpers" package="JUMPER_SOLDER_1X2_OPEN" value="JUMPER_SOLDER_1X2_OPEN" x="45.72" y="48.895"/>
 </elements>
 <signals>
 <signal name="GND">
@@ -2675,13 +2677,9 @@ design rules under a new name.</description>
 <wire x1="47.776203125" y1="48.26" x2="47.77620625" y2="48.26" width="0.254" layer="16"/>
 <wire x1="47.77620625" y1="48.26" x2="53.34" y2="48.26" width="0.254" layer="16"/>
 <wire x1="53.34" y1="48.26" x2="54.61" y2="46.99" width="0.254" layer="16"/>
-<contactref element="C14" pad="2"/>
 <wire x1="46.915584375" y1="47.399378125" x2="47.77620625" y2="48.26" width="0.254" layer="16"/>
-<contactref element="R5" pad="1"/>
 <wire x1="72.771" y1="56.82" x2="71.51" y2="57.44" width="0" layer="19" extent="1-16"/>
-<wire x1="48.045" y1="48.895" x2="47.776203125" y2="48.26" width="0" layer="19" extent="1-16"/>
-<wire x1="48.02" y1="50.8" x2="48.045" y2="48.895" width="0" layer="19" extent="1-1"/>
-<wire x1="46.595" y1="50.8" x2="48.02" y2="50.8" width="0" layer="19" extent="1-1"/>
+<wire x1="46.595" y1="50.8" x2="47.776203125" y2="48.26" width="0" layer="19" extent="1-16"/>
 <wire x1="39.765" y1="41.91" x2="42.31938125" y2="39.444415625" width="0" layer="19" extent="1-16"/>
 <wire x1="39.765" y1="49.53" x2="43.026484375" y2="51.288475" width="0" layer="19" extent="1-16"/>
 <wire x1="43.575" y1="45.72" x2="46.915584375" y2="47.399378125" width="0" layer="19" extent="1-16"/>
@@ -2741,7 +2739,6 @@ design rules under a new name.</description>
 <wire x1="43.18" y1="46.99" x2="45.085" y2="46.99" width="0.254" layer="1"/>
 <contactref element="BAT" pad="+$1"/>
 <contactref element="BAT" pad="+$2"/>
-<wire x1="46.57" y1="48.475" x2="45.085" y2="46.99" width="0.254" layer="1"/>
 <wire x1="34.010865625" y1="44.394171875" x2="33.431690625" y2="43.815" width="0.254" layer="16"/>
 <wire x1="33.431690625" y1="43.815" x2="33.02" y2="43.815" width="0.254" layer="16"/>
 <wire x1="33.02" y1="43.815" x2="32.385" y2="44.45" width="0.254" layer="16"/>
@@ -2765,13 +2762,12 @@ design rules under a new name.</description>
 <wire x1="51.435" y1="29.21" x2="52.07" y2="29.21" width="0.254" layer="16"/>
 <contactref element="LCD" pad="12"/>
 <contactref element="LCD" pad="A"/>
-<contactref element="R6" pad="2"/>
-<contactref element="J2" pad="2"/>
 <contactref element="D1" pad="K"/>
 <contactref element="D2" pad="K"/>
+<contactref element="J2" pad="2"/>
+<wire x1="45.085" y1="46.99" x2="45.9994" y2="47.9044" width="0.254" layer="1"/>
+<wire x1="45.9994" y1="47.9044" x2="45.9994" y2="48.895" width="0.254" layer="1"/>
 <wire x1="51.435" y1="63.5" x2="45.14" y2="69.73" width="0" layer="19" extent="16-16"/>
-<wire x1="45.9994" y1="48.895" x2="46.57" y2="48.475" width="0" layer="19" extent="1-1"/>
-<wire x1="48.045" y1="46.99" x2="46.57" y2="48.475" width="0" layer="19" extent="1-1"/>
 <wire x1="65.405" y1="34.163" x2="52.07" y2="29.21" width="0" layer="19" extent="16-16"/>
 <wire x1="71.12" y1="28.575" x2="65.405" y2="34.163" width="0" layer="19" extent="16-16"/>
 <wire x1="41.91" y1="10.16" x2="51.435" y2="29.21" width="0" layer="19" extent="16-16"/>
@@ -2912,13 +2908,7 @@ design rules under a new name.</description>
 <contactref element="BREAKOUT1" pad="14"/>
 <wire x1="46.56203125" y1="47.75293125" x2="48.339096875" y2="49.53" width="0.254" layer="16"/>
 <wire x1="48.339096875" y1="49.53" x2="52.07" y2="49.53" width="0.254" layer="16"/>
-<contactref element="C14" pad="1"/>
-<wire x1="49.77" y1="50.8" x2="51.04" y2="49.53" width="0.254" layer="1"/>
-<wire x1="51.04" y1="49.53" x2="52.07" y2="49.53" width="0.254" layer="1"/>
-<contactref element="R5" pad="2"/>
-<contactref element="R6" pad="1"/>
-<wire x1="51.04" y1="49.53" x2="49.745" y2="48.895" width="0" layer="19" extent="1-1"/>
-<wire x1="49.745" y1="46.99" x2="49.745" y2="48.895" width="0" layer="19" extent="1-1"/>
+<wire x1="51.04" y1="49.53" x2="52.07" y2="49.53" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="PTE29">
 <contactref element="BREAKOUT1" pad="17"/>
@@ -2930,8 +2920,13 @@ design rules under a new name.</description>
 <contactref element="J3" pad="1"/>
 <contactref element="D1" pad="A"/>
 <contactref element="D2" pad="A"/>
+<contactref element="U1" pad="17"/>
+<contactref element="J3" pad="2"/>
+<wire x1="47.2691375" y1="44.394171875" x2="47.848309375" y2="43.815" width="0.254" layer="16"/>
+<wire x1="47.848309375" y1="43.815" x2="48.26" y2="43.815" width="0.254" layer="16"/>
 <wire x1="41.275" y1="28.155" x2="47.84830625" y2="43.815" width="0" layer="19" extent="16-16"/>
-<wire x1="41.275" y1="24.4856" x2="41.275" y2="28.155" width="0" layer="19" extent="1-16"/>
+<wire x1="41.275" y1="25.0444" x2="41.275" y2="28.155" width="0" layer="19" extent="1-16"/>
+<wire x1="41.275" y1="24.4856" x2="41.275" y2="25.0444" width="0" layer="19" extent="1-1"/>
 <wire x1="39.37" y1="10.16" x2="41.275" y2="24.4856" width="0" layer="19" extent="1-1"/>
 <wire x1="41.91" y1="6.985" x2="39.37" y2="10.16" width="0" layer="19" extent="1-1"/>
 </signal>
@@ -2942,7 +2937,8 @@ design rules under a new name.</description>
 <wire x1="48.26" y1="43.18" x2="49.53" y2="44.45" width="0.254" layer="16"/>
 <wire x1="49.53" y1="44.45" x2="52.07" y2="44.45" width="0.254" layer="16"/>
 <contactref element="U1" pad="18"/>
-<wire x1="46.915584375" y1="44.04061875" x2="47.7762" y2="43.18" width="0" layer="19" extent="16-16"/>
+<wire x1="46.915584375" y1="44.04061875" x2="47.7762" y2="43.180003125" width="0.254" layer="16"/>
+<wire x1="47.7762" y1="43.180003125" x2="47.7762" y2="43.18" width="0.254" layer="16"/>
 <wire x1="18.095" y1="19.515" x2="46.915584375" y2="44.04061875" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="PTE31">
@@ -2971,6 +2967,9 @@ design rules under a new name.</description>
 <contactref element="BREAKOUT1" pad="21"/>
 <wire x1="48.194884375" y1="40.64" x2="53.34" y2="40.64" width="0.254" layer="16"/>
 <wire x1="53.34" y1="40.64" x2="54.61" y2="39.37" width="0.254" layer="16"/>
+<contactref element="U1" pad="21"/>
+<wire x1="45.854925" y1="42.9799625" x2="48.194884375" y2="40.640003125" width="0.254" layer="16"/>
+<wire x1="48.194884375" y1="40.640003125" x2="48.194884375" y2="40.64" width="0.254" layer="16"/>
 </signal>
 <signal name="PTA1">
 <contactref element="U1" pad="23"/>
@@ -2978,6 +2977,10 @@ design rules under a new name.</description>
 <wire x1="45.147821875" y1="42.27285625" x2="49.320675" y2="38.1" width="0.254" layer="16"/>
 <wire x1="49.320675" y1="38.1" x2="53.34" y2="38.1" width="0.254" layer="16"/>
 <wire x1="53.34" y1="38.1" x2="54.61" y2="36.83" width="0.254" layer="16"/>
+<contactref element="S1" pad="2"/>
+<contactref element="S1" pad="1"/>
+<wire x1="18.17" y1="61.94" x2="45.147821875" y2="42.27285625" width="0" layer="19" extent="1-16"/>
+<wire x1="9.77" y1="61.94" x2="18.17" y2="61.94" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PTA2">
 <contactref element="U1" pad="24"/>
@@ -3204,10 +3207,9 @@ design rules under a new name.</description>
 <wire x1="31.115" y1="34.42721875" x2="31.115" y2="33.02" width="0.254" layer="16"/>
 <wire x1="31.115" y1="33.02" x2="29.845" y2="31.75" width="0.254" layer="16"/>
 <wire x1="29.845" y1="31.75" x2="29.21" y2="31.75" width="0.254" layer="16"/>
-<contactref element="S4" pad="2"/>
-<contactref element="S4" pad="1"/>
-<wire x1="63.11" y1="50.51" x2="71.51" y2="50.51" width="0" layer="19" extent="1-1"/>
-<wire x1="31.115" y1="34.42721875" x2="63.11" y2="50.51" width="0" layer="19" extent="1-16"/>
+<contactref element="U1" pad="38"/>
+<wire x1="37.5464125" y1="40.858628125" x2="31.115003125" y2="34.42721875" width="0.254" layer="16"/>
+<wire x1="31.115003125" y1="34.42721875" x2="31.115" y2="34.42721875" width="0.254" layer="16"/>
 </signal>
 <signal name="PTB2">
 <contactref element="U1" pad="37"/>
@@ -3273,19 +3275,18 @@ design rules under a new name.</description>
 <via x="43.18" y="48.895" extent="1-16" drill="0.5"/>
 <contactref element="C5" pad="1"/>
 <contactref element="BREAKOUT1" pad="7"/>
-<wire x1="44.845" y1="48.92" x2="43.205" y2="48.92" width="0.254" layer="1"/>
-<wire x1="43.205" y1="48.92" x2="43.18" y2="48.895" width="0.254" layer="1"/>
-<wire x1="44.845" y1="50.8" x2="44.845" y2="48.92" width="0.254" layer="1"/>
 <wire x1="54.61" y1="57.15" x2="53.34" y2="58.42" width="0.254" layer="16"/>
 <wire x1="53.34" y1="58.42" x2="51.435" y2="58.42" width="0.254" layer="16"/>
 <wire x1="51.435" y1="58.42" x2="50.8" y2="57.785" width="0.254" layer="16"/>
-<wire x1="50.8" y1="57.785" x2="50.8" y2="56.940678125" width="0.254" layer="16"/>
-<contactref element="J2" pad="1"/>
+<wire x1="50.8" y1="57.785" x2="50.8" y2="56.940675" width="0.254" layer="16"/>
 <contactref element="U1" pad="7"/>
+<contactref element="J2" pad="1"/>
+<wire x1="44.08714375" y1="50.22781875" x2="50.8" y2="56.940675" width="0.254" layer="16"/>
 <wire x1="44.08714375" y1="50.22781875" x2="43.18" y2="49.320675" width="0.254" layer="16"/>
 <wire x1="43.18" y1="49.320675" x2="43.18" y2="48.895" width="0.254" layer="16"/>
-<wire x1="44.845" y1="50.8" x2="50.8" y2="56.940678125" width="0" layer="19" extent="1-16"/>
-<wire x1="45.4406" y1="48.895" x2="44.845" y2="48.92" width="0" layer="19" extent="1-1"/>
+<wire x1="43.18" y1="48.895" x2="45.4406" y2="48.895" width="0.254" layer="1"/>
+<wire x1="44.845" y1="50.8" x2="44.845" y2="48.895" width="0.254" layer="1"/>
+<wire x1="44.845" y1="48.895" x2="45.4406" y2="48.895" width="0.254" layer="1"/>
 </signal>
 <signal name="N$15">
 <contactref element="LCD" pad="1"/>
@@ -3359,14 +3360,6 @@ design rules under a new name.</description>
 <wire x1="60.01" y1="68.75" x2="58.17" y2="68.75" width="0.254" layer="16"/>
 <wire x1="58.17" y1="68.75" x2="58" y2="68.58" width="0.254" layer="16"/>
 </signal>
-<signal name="N$3">
-<contactref element="U1" pad="17"/>
-<contactref element="J3" pad="2"/>
-<wire x1="41.275" y1="25.0444" x2="47.2691375" y2="44.394171875" width="0" layer="19" extent="1-16"/>
-</signal>
-<signal name="N$5">
-<contactref element="U1" pad="21"/>
-</signal>
 <signal name="N$6">
 <contactref element="LCD" pad="17"/>
 <contactref element="J6" pad="2"/>
@@ -3392,22 +3385,6 @@ design rules under a new name.</description>
 <contactref element="J10" pad="2"/>
 <wire x1="46.355" y1="67.5894" x2="46.64" y2="69.73" width="0" layer="19" extent="1-1"/>
 </signal>
-<signal name="N$2">
-<contactref element="U1" pad="38"/>
-</signal>
-<signal name="N$4">
-<contactref element="S3" pad="2"/>
-<contactref element="S3" pad="1"/>
-<wire x1="63.11" y1="61.94" x2="71.51" y2="61.94" width="0" layer="19" extent="1-1"/>
-</signal>
-<signal name="N$12">
-<contactref element="S2" pad="2"/>
-<contactref element="S2" pad="1"/>
-<wire x1="9.77" y1="50.51" x2="18.17" y2="50.51" width="0" layer="19" extent="1-1"/>
-</signal>
-<signal name="N$20">
-<contactref element="S1" pad="1"/>
-</signal>
 </signals>
 </board>
 </drawing>
diff --git a/laser-tag badge/laser-tag.sch b/laser-tag badge/laser-tag.sch
index 54b6652..5674776 100644
--- a/laser-tag badge/laser-tag.sch
+++ b/laser-tag badge/laser-tag.sch
@@ -9512,6 +9512,11 @@ www.irf.com&lt;p&gt;
 <smd name="2" x="0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
 <wire x1="-0.254" y1="0" x2="0.254" y2="0" width="0.254" layer="1"/>
 </package>
+<package name="JUMPER_SOLDER_1X2_OPEN">
+<description>Solder jumper 6mil clearance</description>
+<smd name="1" x="-0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
+<smd name="2" x="0.2794" y="0" dx="0.8128" dy="0.4064" layer="1" rot="R90" cream="no"/>
+</package>
 </packages>
 <symbols>
 <symbol name="JUMP_SOLDER_1X2_CLOSED">
@@ -9532,6 +9537,23 @@ www.irf.com&lt;p&gt;
 </polygon>
 <wire x1="-0.762" y1="0" x2="0.762" y2="0" width="0.254" layer="94"/>
 </symbol>
+<symbol name="JUMP_SOLDER_1X2_OPEN">
+<wire x1="-2.54" y1="0" x2="-1.524" y2="0" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="0" x2="1.524" y2="0" width="0.1524" layer="94"/>
+<text x="-4.318" y="2.54" size="1.778" layer="95">&gt;NAME</text>
+<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas"/>
+<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" rot="R180"/>
+<polygon width="0.254" layer="94">
+<vertex x="-0.635" y="0.9137"/>
+<vertex x="-0.635" y="-0.9137" curve="-90"/>
+<vertex x="-1.5875" y="0" curve="-90"/>
+</polygon>
+<polygon width="0.254" layer="94">
+<vertex x="0.635" y="-0.9137"/>
+<vertex x="0.635" y="0.9137" curve="-90"/>
+<vertex x="1.5875" y="0" curve="-90"/>
+</polygon>
+</symbol>
 </symbols>
 <devicesets>
 <deviceset name="JUMPER_SOLDER_1X2_CLOSED" prefix="J">
@@ -9550,6 +9572,22 @@ www.irf.com&lt;p&gt;
 </device>
 </devices>
 </deviceset>
+<deviceset name="JUMPER_SOLDER_1X2_OPEN" prefix="J">
+<gates>
+<gate name="J" symbol="JUMP_SOLDER_1X2_OPEN" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="JUMPER_SOLDER_1X2_OPEN">
+<connects>
+<connect gate="J" pin="1" pad="1"/>
+<connect gate="J" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
 </devicesets>
 </library>
 <library name="opto-trans-siemens">
@@ -9676,12 +9714,7 @@ www.irf.com&lt;p&gt;
 <part name="S4" library="switch" deviceset="SKHMP*E010" device="" technology="S"/>
 <part name="GND8" library="supply1" deviceset="GND" device=""/>
 <part name="U$1" library="Graphics" deviceset="AHA" device=""/>
-<part name="C14" library="rcl" deviceset="C-EU" device="C0603K" value="0.1 uF"/>
 <part name="Q1" library="transistor-small-signal" deviceset="BSS123" device="" value="2N7002ET1G"/>
-<part name="GND10" library="supply1" deviceset="GND" device=""/>
-<part name="R5" library="rcl" deviceset="R-EU_" device="R0603" value="100k"/>
-<part name="R6" library="rcl" deviceset="R-EU_" device="R0603" value="220k"/>
-<part name="P+8" library="supply1" deviceset="VCC" device=""/>
 <part name="J1" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
 <part name="J3" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
 <part name="J6" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
@@ -9689,16 +9722,14 @@ www.irf.com&lt;p&gt;
 <part name="J8" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
 <part name="J9" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
 <part name="J10" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
-<part name="J2" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_CLOSED" device=""/>
 <part name="D1" library="opto-trans-siemens" deviceset="SFH225" device="" value="PDB-C156"/>
 <part name="D2" library="opto-trans-siemens" deviceset="SFH225" device="" value="PDB-C156"/>
+<part name="J2" library="Jumpers" deviceset="JUMPER_SOLDER_1X2_OPEN" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="-96.52" y="99.06" size="1.778" layer="91">Place near VDD pins</text>
-<text x="-45.72" y="-33.02" size="1.778" layer="91">DNP if not
-using VREF_OUT</text>
 <text x="73.66" y="30.48" size="1.778" layer="91">Ports B and E do not
 support interrupts</text>
 </plain>
@@ -9750,12 +9781,7 @@ support interrupts</text>
 <instance part="S4" gate="G$1" x="147.32" y="73.66"/>
 <instance part="GND8" gate="1" x="157.48" y="17.78"/>
 <instance part="U$1" gate="G$1" x="27.94" y="109.22"/>
-<instance part="C14" gate="G$1" x="-53.34" y="-30.48"/>
 <instance part="Q1" gate="G$1" x="-5.08" y="-20.32"/>
-<instance part="GND10" gate="1" x="-60.96" y="-43.18"/>
-<instance part="R5" gate="G$1" x="-60.96" y="-30.48" rot="R90"/>
-<instance part="R6" gate="G$1" x="-60.96" y="-15.24" rot="R90"/>
-<instance part="P+8" gate="VCC" x="-60.96" y="-5.08"/>
 <instance part="J1" gate="J" x="2.54" y="99.06"/>
 <instance part="J3" gate="J" x="-10.16" y="58.42"/>
 <instance part="J6" gate="J" x="25.4" y="-27.94" rot="R90"/>
@@ -9763,9 +9789,9 @@ support interrupts</text>
 <instance part="J8" gate="J" x="30.48" y="-27.94" rot="R90"/>
 <instance part="J9" gate="J" x="33.02" y="-27.94" rot="R90"/>
 <instance part="J10" gate="J" x="35.56" y="-27.94" rot="R90"/>
-<instance part="J2" gate="J" x="-10.16" y="91.44" rot="R90"/>
 <instance part="D1" gate="1" x="-25.4" y="91.44" rot="R180"/>
 <instance part="D2" gate="1" x="-20.32" y="91.44" rot="R180"/>
+<instance part="J2" gate="J" x="-10.16" y="91.44" rot="R90"/>
 </instances>
 <busses>
 <bus name="PTE20,PTE21,PTE22,PTE23,PTE24,PTE31">
@@ -9778,16 +9804,6 @@ support interrupts</text>
 <nets>
 <net name="GND" class="0">
 <segment>
-<pinref part="C14" gate="G$1" pin="2"/>
-<wire x1="-60.96" y1="-40.64" x2="-60.96" y2="-38.1" width="0.1524" layer="91"/>
-<wire x1="-60.96" y1="-38.1" x2="-53.34" y2="-38.1" width="0.1524" layer="91"/>
-<wire x1="-53.34" y1="-38.1" x2="-53.34" y2="-35.56" width="0.1524" layer="91"/>
-<pinref part="GND10" gate="1" pin="GND"/>
-<pinref part="R5" gate="G$1" pin="1"/>
-<wire x1="-60.96" y1="-38.1" x2="-60.96" y2="-35.56" width="0.1524" layer="91"/>
-<junction x="-60.96" y="-38.1"/>
-</segment>
-<segment>
 <pinref part="BAT" gate="G$1" pin="-"/>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="-114.3" y1="83.82" x2="-114.3" y2="81.28" width="0.1524" layer="91"/>
@@ -10054,11 +10070,6 @@ support interrupts</text>
 <wire x1="10.16" y1="-25.4" x2="10.16" y2="-7.62" width="0.1524" layer="91"/>
 <junction x="10.16" y="-7.62"/>
 </segment>
-<segment>
-<pinref part="R6" gate="G$1" pin="2"/>
-<pinref part="P+8" gate="VCC" pin="VCC"/>
-<wire x1="-60.96" y1="-10.16" x2="-60.96" y2="-7.62" width="0.1524" layer="91"/>
-</segment>
 </net>
 <net name="PTA3" class="0">
 <segment>
@@ -10258,17 +10269,6 @@ support interrupts</text>
 <wire x1="-104.14" y1="45.72" x2="-99.06" y2="45.72" width="0.1524" layer="91"/>
 <label x="-99.06" y="45.72" size="1.778" layer="95"/>
 </segment>
-<segment>
-<pinref part="C14" gate="G$1" pin="1"/>
-<wire x1="-53.34" y1="-27.94" x2="-53.34" y2="-22.86" width="0.1524" layer="91"/>
-<label x="-53.34" y="-22.86" size="1.778" layer="95"/>
-<pinref part="R5" gate="G$1" pin="2"/>
-<pinref part="R6" gate="G$1" pin="1"/>
-<wire x1="-60.96" y1="-25.4" x2="-60.96" y2="-22.86" width="0.1524" layer="91"/>
-<wire x1="-60.96" y1="-22.86" x2="-60.96" y2="-20.32" width="0.1524" layer="91"/>
-<wire x1="-60.96" y1="-22.86" x2="-53.34" y2="-22.86" width="0.1524" layer="91"/>
-<junction x="-60.96" y="-22.86"/>
-</segment>
 </net>
 <net name="PTE29" class="0">
 <segment>
@@ -10292,6 +10292,11 @@ support interrupts</text>
 <pinref part="D1" gate="1" pin="A"/>
 <pinref part="D2" gate="1" pin="A"/>
 </segment>
+<segment>
+<pinref part="U1" gate="A" pin="PTE29"/>
+<wire x1="-5.08" y1="58.42" x2="10.16" y2="58.42" width="0.1524" layer="91"/>
+<pinref part="J3" gate="J" pin="2"/>
+</segment>
 </net>
 <net name="PTE30" class="0">
 <segment>
@@ -10351,6 +10356,10 @@ support interrupts</text>
 <wire x1="-111.76" y1="35.56" x2="-116.84" y2="35.56" width="0.1524" layer="91"/>
 <label x="-116.84" y="35.56" size="1.778" layer="95" rot="R180"/>
 </segment>
+<segment>
+<pinref part="U1" gate="A" pin="PTE25"/>
+<wire x1="10.16" y1="48.26" x2="7.62" y2="48.26" width="0.1524" layer="91"/>
+</segment>
 </net>
 <net name="PTA1" class="0">
 <segment>
@@ -10362,6 +10371,14 @@ support interrupts</text>
 <wire x1="-111.76" y1="33.02" x2="-116.84" y2="33.02" width="0.1524" layer="91"/>
 <label x="-116.84" y="33.02" size="1.778" layer="95" rot="R180"/>
 </segment>
+<segment>
+<pinref part="S1" gate="G$1" pin="1.2"/>
+<wire x1="142.24" y1="25.4" x2="139.7" y2="25.4" width="0.1524" layer="91"/>
+<wire x1="139.7" y1="25.4" x2="139.7" y2="27.94" width="0.1524" layer="91"/>
+<pinref part="S1" gate="G$1" pin="1.1"/>
+<wire x1="139.7" y1="27.94" x2="142.24" y2="27.94" width="0.1524" layer="91"/>
+<label x="139.7" y="25.4" size="1.778" layer="95" rot="R180"/>
+</segment>
 </net>
 <net name="PTA2" class="0">
 <segment>
@@ -10695,19 +10712,14 @@ support interrupts</text>
 </net>
 <net name="PTB3" class="0">
 <segment>
-<pinref part="S4" gate="G$1" pin="1.2"/>
-<wire x1="142.24" y1="71.12" x2="139.7" y2="71.12" width="0.1524" layer="91"/>
-<wire x1="139.7" y1="71.12" x2="132.08" y2="71.12" width="0.1524" layer="91"/>
-<pinref part="S4" gate="G$1" pin="1.1"/>
-<wire x1="142.24" y1="73.66" x2="139.7" y2="73.66" width="0.1524" layer="91"/>
-<wire x1="139.7" y1="73.66" x2="139.7" y2="71.12" width="0.1524" layer="91"/>
-<junction x="139.7" y="71.12"/>
-</segment>
-<segment>
 <pinref part="BREAKOUT2" gate="A" pin="6"/>
 <wire x1="-63.5" y1="55.88" x2="-58.42" y2="55.88" width="0.1524" layer="91"/>
 <label x="-58.42" y="55.88" size="1.778" layer="95"/>
 </segment>
+<segment>
+<pinref part="U1" gate="A" pin="PTB3"/>
+<wire x1="119.38" y1="33.02" x2="116.84" y2="33.02" width="0.1524" layer="91"/>
+</segment>
 </net>
 <net name="PTB2" class="0">
 <segment>
@@ -10773,9 +10785,9 @@ support interrupts</text>
 <wire x1="-10.16" y1="83.82" x2="-10.16" y2="81.28" width="0.1524" layer="91"/>
 <wire x1="-10.16" y1="83.82" x2="-10.16" y2="86.36" width="0.1524" layer="91"/>
 <junction x="-10.16" y="83.82"/>
-<pinref part="J2" gate="J" pin="1"/>
 <pinref part="U1" gate="A" pin="VOUT33"/>
 <wire x1="-10.16" y1="83.82" x2="10.16" y2="83.82" width="0.1524" layer="91"/>
+<pinref part="J2" gate="J" pin="1"/>
 </segment>
 <segment>
 <pinref part="BREAKOUT1" gate="A" pin="7"/>
@@ -10880,19 +10892,6 @@ support interrupts</text>
 <pinref part="Q1" gate="G$1" pin="S"/>
 </segment>
 </net>
-<net name="N$3" class="0">
-<segment>
-<pinref part="U1" gate="A" pin="PTE29"/>
-<wire x1="-5.08" y1="58.42" x2="10.16" y2="58.42" width="0.1524" layer="91"/>
-<pinref part="J3" gate="J" pin="2"/>
-</segment>
-</net>
-<net name="N$5" class="0">
-<segment>
-<pinref part="U1" gate="A" pin="PTE25"/>
-<wire x1="10.16" y1="48.26" x2="7.62" y2="48.26" width="0.1524" layer="91"/>
-</segment>
-</net>
 <net name="N$6" class="0">
 <segment>
 <pinref part="LCD" gate="G$1" pin="/CS1"/>
@@ -10923,40 +10922,6 @@ support interrupts</text>
 <pinref part="J10" gate="J" pin="2"/>
 </segment>
 </net>
-<net name="N$2" class="0">
-<segment>
-<pinref part="U1" gate="A" pin="PTB3"/>
-<wire x1="119.38" y1="33.02" x2="116.84" y2="33.02" width="0.1524" layer="91"/>
-</segment>
-</net>
-<net name="N$4" class="0">
-<segment>
-<pinref part="S3" gate="G$1" pin="1.2"/>
-<wire x1="142.24" y1="55.88" x2="139.7" y2="55.88" width="0.1524" layer="91"/>
-<pinref part="S3" gate="G$1" pin="1.1"/>
-<wire x1="142.24" y1="58.42" x2="139.7" y2="58.42" width="0.1524" layer="91"/>
-<wire x1="139.7" y1="58.42" x2="139.7" y2="55.88" width="0.1524" layer="91"/>
-<junction x="139.7" y="55.88"/>
-<wire x1="139.7" y1="55.88" x2="134.62" y2="55.88" width="0.1524" layer="91"/>
-</segment>
-</net>
-<net name="N$12" class="0">
-<segment>
-<pinref part="S2" gate="G$1" pin="1.2"/>
-<wire x1="142.24" y1="40.64" x2="139.7" y2="40.64" width="0.1524" layer="91"/>
-<pinref part="S2" gate="G$1" pin="1.1"/>
-<wire x1="142.24" y1="43.18" x2="139.7" y2="43.18" width="0.1524" layer="91"/>
-<wire x1="139.7" y1="43.18" x2="139.7" y2="40.64" width="0.1524" layer="91"/>
-<junction x="139.7" y="40.64"/>
-<wire x1="139.7" y1="40.64" x2="137.16" y2="40.64" width="0.1524" layer="91"/>
-</segment>
-</net>
-<net name="N$20" class="0">
-<segment>
-<pinref part="S1" gate="G$1" pin="1.1"/>
-<wire x1="142.24" y1="27.94" x2="139.7" y2="27.94" width="0.1524" layer="91"/>
-</segment>
-</net>
 </nets>
 </sheet>
 </sheets>